PHP 5.4.36 Released

gzwrite

(PHP 4, PHP 5)

gzwriteنوشتن امن باینری gz-file write

Description

int gzwrite ( resource $zp , string $string [, int $length ] )

gzwrite() writes the contents of string to the given gz-file.

Parameters

zp

اشاره‌گر gz-file. باید صحیح باشد و به فایل موفق باز شده توسط gzopen() اشاره کند.

string

رشته برای نوشتن.

length

تعداد بایت‌های غیرفشرده برای نوشتن. اگر این پارامتر فراهم شده باشد نوشتن پس ازlength (غیرفشرده)بایت یا در پایان string متوقف می‌شود.

Note:

توجه کنید که اگر آرگومان length داده شود تنظیماتmagic_quotes_runtime نادیده گرفته خواهد شد و هیچ / از string حذف نمی‌شود.

Return Values

بازگرداندن تعداد (غیرفشرده) بایت‌ها نوشته شده در جریان gz-file .

Examples

Example #1 مثال gzwrite()

<?php
$string 
'Some information to compress';
$gz gzopen('somefile.gz','w9');
gzwrite($gz$string);
gzclose($gz);
?>

See Also

  • gzread() - خواندن باینری امن gz-file
  • gzopen() - باز کردن gz-file

add a note add a note

User Contributed Notes 6 notes

up
2
calmarius at nospam dot atw dot hu
5 years ago
gz compression is often used with tar archives. Building tar archives is quite easy. Here is a code snipplet which can be used for building tar archives before compressing them to tar.gz.

<?php

//\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\
// Adds file header to the tar file, it is used before adding file content.
// f: file resource (provided by eg. fopen)
// phisfn: path to file
// archfn: path to file in archive, directory names must be followed by '/'
//\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\
function TarAddHeader($f,$phisfn,$archfn)
{
   
$info=stat($phisfn);
   
$ouid=sprintf("%6s ", decoct($info[4]));
   
$ogid=sprintf("%6s ", decoct($info[5]));
   
$omode=sprintf("%6s ", decoct(fileperms($phisfn)));
   
$omtime=sprintf("%11s", decoct(filemtime($phisfn)));
    if (@
is_dir($phisfn))
    {
        
$type="5";
        
$osize=sprintf("%11s ", decoct(0));
    }
    else
    {
        
$type='';
        
$osize=sprintf("%11s ", decoct(filesize($phisfn)));
        
clearstatcache();
    }
   
$dmajor = '';
   
$dminor = '';
   
$gname = '';
   
$linkname = '';
   
$magic = '';
   
$prefix = '';
   
$uname = '';
   
$version = '';
   
$chunkbeforeCS=pack("a100a8a8a8a12A12",$archfn, $omode, $ouid, $ogid, $osize, $omtime);
   
$chunkafterCS=pack("a1a100a6a2a32a32a8a8a155a12", $type, $linkname, $magic, $version, $uname, $gname, $dmajor, $dminor ,$prefix,'');

   
$checksum = 0;
    for (
$i=0; $i<148; $i++) $checksum+=ord(substr($chunkbeforeCS,$i,1));
    for (
$i=148; $i<156; $i++) $checksum+=ord(' ');
    for (
$i=156, $j=0; $i<512; $i++, $j++)    $checksum+=ord(substr($chunkafterCS,$j,1));

   
fwrite($f,$chunkbeforeCS,148);
   
$checksum=sprintf("%6s ",decoct($checksum));
   
$bdchecksum=pack("a8", $checksum);
   
fwrite($f,$bdchecksum,8);
   
fwrite($f,$chunkafterCS,356);
    return
true;
}
//\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/
// Writes file content to the tar file must be called after a TarAddHeader
// f:file resource provided by fopen
// phisfn: path to file
//\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/
function TarWriteContents($f,$phisfn)
{
    if (@
is_dir($phisfn))
    {
        return;
    }
    else
    {
       
$size=filesize($phisfn);
       
$padding=$size % 512 ? 512-$size%512 : 0;
       
$f2=fopen($phisfn,"rb");
        while (!
feof($f2)) fwrite($f,fread($f2,1024*1024));
       
$pstr=sprintf("a%d",$padding);
       
fwrite($f,pack($pstr,''));
    }
}
//\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/
// Adds 1024 byte footer at the end of the tar file
// f: file resource
//\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/
function TarAddFooter($f)
{
   
fwrite($f,pack('a1024',''));
}

?>
up
2
Kioob
11 years ago
This is a short example of use gzwrite function.
<?php
function gzcompressfile($source,$level=false){
   
$dest=$source.'.gz';
   
$mode='wb'.$level;
   
$error=false;
    if(
$fp_out=gzopen($dest,$mode)){
        if(
$fp_in=fopen($source,'rb')){
            while(!
feof($fp_in))
               
gzwrite($fp_out,fread($fp_in,1024*512));
           
fclose($fp_in);
            }
          else
$error=true;
       
gzclose($fp_out);
        }
      else
$error=true;
    if(
$error) return false;
      else return
$dest;
    }
?>

the function gzcompressfile() compress a file 'data.csv' to 'data.csv.gz'. the function return false if error, and the new file name if it's ok.
up
1
Anonymous
6 years ago
katzlbtjunk's method is certainly shorter, but it is unusable for anything except small files.  It would try to load the whole file into memory, then create an entire compressed copy, and only then write it to disk.  The other method given below will not exhaust memory like that.
up
0
Take Heed
4 years ago
Read the description of gzwrite() very carefully.  If the 'length' option is not specified, then the input data will have slashes stripped on systems where magic quotes are enabled.  This is important information to know when compressing files.

<?php
$data
= fread($fp, 5000);
gzwrite($fp2, $data, strlen($data));
?>

Is the correct way to avoid issues with magic quotes.
up
0
repository at lamaresh dot net
5 years ago
This function add a line to a .gz compressed file

<?php
function AppendLineGz($file,$string) {
    if (
file_exists($file)) {
       
$lines = gzfile($file);
       
$lines[count($lines)] = "$string\r\n";
       
$input=implode($lines);
    } else {
$input="$string\r\n";}
   
$gz = gzopen($file,'w9');
   
gzwrite($gz, $input);
   
gzclose($gz);   
}
?>
up
-1
katzlbtjunk at hotmail dot com
6 years ago
How about this instead:
$s = file_get_contents('file.tar');
file_put_contents('file.tar.gz',gzencode($s,9));
To Top