## Comparison Operators

Comparison operators, as their name implies, allow you to compare two values. You may also be interested in viewing the type comparison tables, as they show examples of various type related comparisons.

Comparison Operators
Example Name Result
\$a == \$b Equal TRUE if \$a is equal to \$b.
\$a === \$b Identical TRUE if \$a is equal to \$b, and they are of the same type. (introduced in PHP 4)
\$a != \$b Not equal TRUE if \$a is not equal to \$b.
\$a <> \$b Not equal TRUE if \$a is not equal to \$b.
\$a !== \$b Not identical TRUE if \$a is not equal to \$b, or they are not of the same type. (introduced in PHP 4)
\$a < \$b Less than TRUE if \$a is strictly less than \$b.
\$a > \$b Greater than TRUE if \$a is strictly greater than \$b.
\$a <= \$b Less than or equal to TRUE if \$a is less than or equal to \$b.
\$a >= \$b Greater than or equal to TRUE if \$a is greater than or equal to \$b.

If you compare a number with a string or the comparison involves numerical strings, then each string is converted to a number and the comparison performed numerically. These rules also apply to the switch statement. The type conversion does not take place when the comparison is === or !== as this involves comparing the type as well as the value.

``` <?phpvar_dump(0 == "a"); // 0 == 0 -> truevar_dump("1" == "01"); // 1 == 1 -> truevar_dump("10" == "1e1"); // 10 == 10 -> truevar_dump(100 == "1e2"); // 100 == 100 -> trueswitch ("a") {case 0:    echo "0";    break;case "a": // never reached because "a" is already matched with 0    echo "a";    break;}?> ```

For various types, comparison is done according to the following table (in order).

Comparison with Various Types
Type of Operand 1 Type of Operand 2 Result
null or string string Convert NULL to "", numerical or lexical comparison
bool or null anything Convert to bool, FALSE < TRUE
object object Built-in classes can define its own comparison, different classes are uncomparable, same class - compare properties the same way as arrays (PHP 4), PHP 5 has its own explanation
string, resource or number string, resource or number Translate strings and resources to numbers, usual math
array array Array with fewer members is smaller, if key from operand 1 is not found in operand 2 then arrays are uncomparable, otherwise - compare value by value (see following example)
array anything array is always greater
object anything object is always greater

Example #1 Transcription of standard array comparison

``` <?php// Arrays are compared like this with standard comparison operatorsfunction standard_array_compare(\$op1, \$op2){    if (count(\$op1) < count(\$op2)) {        return -1; // \$op1 < \$op2    } elseif (count(\$op1) > count(\$op2)) {        return 1; // \$op1 > \$op2    }    foreach (\$op1 as \$key => \$val) {        if (!array_key_exists(\$key, \$op2)) {            return null; // uncomparable        } elseif (\$val < \$op2[\$key]) {            return -1;        } elseif (\$val > \$op2[\$key]) {            return 1;        }    }    return 0; // \$op1 == \$op2}?> ```

See also strcasecmp(), strcmp(), Array operators, and the manual section on Types.

Warning

# Comparison of floating point numbers

Because of the way floats are represented internally, you should not test two floats for equality.

### Ternary Operator

Another conditional operator is the "?:" (or ternary) operator.

Example #2 Assigning a default value

``` <?php// Example usage for: Ternary Operator\$action = (empty(\$_POST['action'])) ? 'default' : \$_POST['action'];// The above is identical to this if/else statementif (empty(\$_POST['action'])) {    \$action = 'default';} else {    \$action = \$_POST['action'];}?> ```
The expression (expr1) ? (expr2) : (expr3) evaluates to expr2 if expr1 evaluates to TRUE, and expr3 if expr1 evaluates to FALSE.

Since PHP 5.3, it is possible to leave out the middle part of the ternary operator. Expression expr1 ?: expr3 returns expr1 if expr1 evaluates to TRUE, and expr3 otherwise.

Note: Please note that the ternary operator is a statement, and that it doesn't evaluate to a variable, but to the result of a statement. This is important to know if you want to return a variable by reference. The statement return \$var == 42 ? \$a : \$b; in a return-by-reference function will therefore not work and a warning is issued in later PHP versions.

Note:

It is recommended that you avoid "stacking" ternary expressions. PHP's behaviour when using more than one ternary operator within a single statement is non-obvious:

Example #3 Non-obvious Ternary Behaviour

``` <?php// on first glance, the following appears to output 'true'echo (true?'true':false?'t':'f');// however, the actual output of the above is 't'// this is because ternary expressions are evaluated from left to right// the following is a more obvious version of the same code as aboveecho ((true ? 'true' : false) ? 't' : 'f');// here, you can see that the first expression is evaluated to 'true', which// in turn evaluates to (bool)true, thus returning the true branch of the// second ternary expression.?> ```

### User Contributed Notes 55 notes

90
crazy888s at hotmail dot com
8 years ago
``` I couldn't find much info on stacking the new ternary operator, so I ran some tests:<?phpecho 0 ?: 1 ?: 2 ?: 3; //1echo 1 ?: 0 ?: 3 ?: 2; //1echo 2 ?: 1 ?: 0 ?: 3; //2echo 3 ?: 2 ?: 1 ?: 0; //3echo 0 ?: 1 ?: 2 ?: 3; //1echo 0 ?: 0 ?: 2 ?: 3; //2echo 0 ?: 0 ?: 0 ?: 3; //3?>It works just as expected, returning the first non-false value within a group of expressions. ```
42
Harry Willis
3 years ago
``` I was interested about the following two uses of the ternary operator (PHP >= 5.3) for using a "default" value if a variable is not set or evaluates to false:<?php(isset(\$some_variable) && \$some_variable) ? \$some_variable : 'default_value';\$some_variable ?: 'default_value';?>The second is more readable, but will throw an ERR_NOTICE is \$some_variable is not set. Of course, this could be overcome by suppressing the notice using the @ operator.Performance-wise, though, comparing 1 million iterations of the three statements  (isset(\$foo) && \$foo) ? \$foo : ''  (\$foo) ?: ''  (@\$foo) ?: ''results in the following:  \$foo is NOT SET.    [isset] 0.18222403526306    [?:]    0.57496404647827    [@ ?:]  0.64780592918396  \$foo is NULL.    [isset] 0.17995285987854    [?:]    0.15304207801819    [@ ?:]  0.20394206047058  \$foo is FALSE.    [isset] 0.19388508796692    [?:]    0.15359902381897    [@ ?:]  0.20741701126099  \$foo is TRUE.    [isset] 0.17265486717224    [?:]    0.11773896217346    [@ ?:]  0.16193103790283In other words, using the long-form ternary operator with isset(\$some_variable) is preferable overall if \$some_variable may not be set.(error_reporting was set to zero for the benchmark, to avoid printing a million notices...) ```
25
thomas dot oldbury at tgohome dot com
10 years ago
``` Be careful when using the ternary operator!The following will not evaluate to the expected result:<?phpecho "a string that has a " . (true) ? 'true' : 'false' . " condition in. ";?>Will print true.Instead, use this:<?phpecho "a string that has a " . ((true) ? 'true' : 'false') . " condition in. ";?>This will evaluate to the expected result: "a string that has a true condition in. "I hope this helps. ```
56
arnaud at arnapou dot net
7 years ago
``` [Editor's note: consider using ===] I discover after 10 years of PHP development something awfull : even if you make a string comparison (both are strings), strings are tested like integers and leading "space" character (even \n, \r, \t) is ignored .... I spent hours because of leading \n in a string ... it hurts my developper sensibility to see two strings beeing compared like integers and not like strings ... I use strcmp now for string comparison ... so stupid ... Test code : <?php test("1234", "1234"); test("1234", " 1234"); test("1234", "\n1234"); test("1234", "1234 "); test("1234", "1234\n"); function test(\$v1, \$v2) {     echo "<h1>[".show_cr(\$v1)."] vs [".show_cr(\$v2)."]</h1>";     echo my_var_dump(\$v1)."<br />";     echo my_var_dump(\$v2)."<br />";     if(\$v1 == \$v2) {         echo "EQUAL !";     }     else {         echo "DIFFERENT !";     } } function show_cr(\$var) {     return str_replace("\n", "\\n", \$var); } function my_var_dump(\$var) {     ob_start();     var_dump(\$var);     \$dump = show_cr(trim(ob_get_contents()));     ob_end_clean();     return \$dump; } ?> Displays this -> [1234] vs [1234] string(4) "1234" string(4) "1234" EQUAL ! [1234] vs [ 1234] string(4) "1234" string(5) " 1234" EQUAL ! [1234] vs [\n1234] string(4) "1234" string(5) "\n1234" EQUAL ! [1234] vs [1234 ] string(4) "1234" string(5) "1234 " DIFFERENT ! [1234] vs [1234\n] string(4) "1234" string(5) "1234\n" DIFFERENT ! ```
27
mail at mkharitonov dot net
3 years ago
``` Be careful with the "==" operator when both operands are strings:<?phpvar_dump('123' == '       123'); // truevar_dump('1e3' == '1000'); // truevar_dump('+74951112233' == '74951112233'); // truevar_dump('00000020' == '0000000000000000020'); // truevar_dump('0X1D' == '29E0'); // truevar_dump('0xafebac' == '11529132'); // truevar_dump('0xafebac' == '0XAFEBAC'); // truevar_dump('0xeb' == '+235e-0'); // truevar_dump('0.235' == '+.235'); // truevar_dump('0.2e-10' == '2.0E-11'); // truevar_dump('61529519452809720693702583126814' == '61529519452809720000000000000000'); // true in php < 5.4.4 ```
25
jwhiting at hampshire dot edu
14 years ago
``` note: the behavior below is documented in the appendix K about type comparisons, but since it is somewhat buried i thought i should raise it here for people since it threw me for a loop until i figured it out completely.just to clarify a tricky point about the == comparison operator when dealing with strings and numbers:('some string' == 0) returns TRUEhowever, ('123' == 0) returns FALSEalso note that ((int) 'some string') returns 0and ((int) '123') returns 123the behavior makes senes but you must be careful when comparing strings to numbers, e.g. when you're comparing a request variable which you expect to be numeric. its easy to fall into the trap of:if (\$_GET['myvar']==0) dosomething();as this will dosomething() even when \$_GET['myvar'] is 'some string' and clearly not the value 0i was getting lazy with my types since php vars are so flexible, so be warned to pay attention to the details... ```
40
Anonymous
12 years ago
``` The following contrasts the trinary operator associativity in PHP and Java.  The first test would work as expected in Java (evaluates left-to-right, associates right-to-left, like if stmnt), the second in PHP (evaluates and associates left-to-right)<?phpecho "\n\n######----------- trinary operator associativity\n\n";function trinaryTest(\$foo){    \$bar    = \$foo > 20            ? "greater than 20"            : \$foo > 10                ? "greater than 10"                : \$foo > 5                    ? "greater than 5"                    : "not worthy of consideration";        echo \$foo." =>  ".\$bar."\n";}echo "----trinaryTest\n\n";trinaryTest(21);trinaryTest(11);trinaryTest(6);trinaryTest(4);function trinaryTestParens(\$foo){        \$bar    = \$foo > 20            ? "greater than 20"            : (\$foo > 10                ? "greater than 10"                : (\$foo > 5                    ? "greater than 5"                    : "not worthy of consideration"));        echo \$foo." =>  ".\$bar."\n";}echo "----trinaryTestParens\n\n";trinaryTestParens(21);trinaryTestParens(11);trinaryTest(6);trinaryTestParens(4);?>Output:######----------- trinary operator associativity ----trinaryTest21 =>  greater than 511 =>  greater than 56 =>  greater than 54 =>  not worthy of consideration----trinaryTestParens21 =>  greater than 2011 =>  greater than 106 =>  greater than 54 =>  not worthy of consideration ```
12
Jeremy Swinborne
5 years ago
``` Beware of the consequences of comparing strings to numbers.  You can disprove the laws of the universe.echo ('X' == 0 && 'X' == true && 0 == false) ? 'true == false' : 'sanity prevails';This will output 'true == false'.  This stems from the use of the UNIX function strtod() to convert strings to numbers before comparing.  Since 'X' or any other string without a number in it converts to 0 when compared to a number, 0 == 0 && 'X' == true && 0 == false ```
17
rshawiii at yahoo dot com
12 years ago
``` You can't just compare two arrays with the === operator like you would think to find out if they are equal or not.  This is more complicated when you have multi-dimensional arrays.  Here is a recursive comparison function. <?php /** * Compares two arrays to see if they contain the same values.  Returns TRUE or FALSE. * usefull for determining if a record or block of data was modified (perhaps by user input) * prior to setting a "date_last_updated" or skipping updating the db in the case of no change. * * @param array \$a1 * @param array \$a2 * @return boolean */ function array_compare_recursive(\$a1, \$a2) {    if (!(is_array(\$a1) and (is_array(\$a2)))) { return FALSE;}           if (!count(\$a1) == count(\$a2))       {        return FALSE; // arrays don't have same number of entries       }          foreach (\$a1 as \$key => \$val)    {        if (!array_key_exists(\$key, \$a2))            {return FALSE; // uncomparable array keys don't match               }        elseif (is_array(\$val) and is_array(\$a2[\$key]))  // if both entries are arrays then compare recursive            {if (!array_compare_recursive(\$val,\$a2[\$key])) return FALSE;            }        elseif (!(\$val === \$a2[\$key])) // compare entries must be of same type.            {return FALSE;            }    }    return TRUE; // \$a1 === \$a2 } ?> ```
G
7 months ago
``` Do note, using the ternary operator shorthand (since 5.3), omitting the 2nd expression the first expression will only be called once.Before 5.3 (or not using the shorthand)<?php\$val = f('x') ? f('x') : false;// f('x') will be run twice?>After 5.3<?php\$val = f('x') ?: false;// f('x') will be run once?> ```
13
Cuong Huy To
6 years ago
``` In the table "Comparison with Various Types", please move the last line about "Object" to be above the line about "Array", since Object is considered to be greater than Array (tested on 5.3.3)(Please remove my "Anonymous" post of the same content before. You could check IP to see that I forgot to type my name) ```
16
Anonymous
8 years ago
``` Note: The ternary shortcut currently seems to be of no use in dealing with unexisting keys in an array, as PHP will throw an error. Take the following example.<?php\$_POST['Unexisting'] = \$_POST['Unexisting'] ?: false;?>PHP will throw an error that the "Unexisting" key does not exist. The @ operator does not work here to suppress this error. ```
18
11 years ago
``` Note: according to the spec, PHP's comparison operators are not transitive.  For example, the following are all true in PHP5: "11" < "a" < 2 < "11" As a result, the outcome of sorting an array depends on the order the elements appear in the pre-sort array.  The following code will dump out two arrays with *different* orderings: <?php \$a = array(2,    "a",  "11", 2); \$b = array(2,    "11", "a",  2); sort(\$a); var_dump(\$a); sort(\$b); var_dump(\$b); ?> This is not a bug report -- given the spec on this documentation page, what PHP does is "correct".  But that may not be what was intended... ```
13
bimal at sanjaal dot com
4 years ago
``` I came across peculiar outputs while I was attempting to debug a script <?php # Setup platform (pre conditions somewhere in a loop) \$index=1; \$tally = array(); # May work with warnings that \$tally[\$index] is not initialized # Notice: Undefined offset: 1 in D:\htdocs\colors\ColorCompare\i.php on line #__ # It is an old fashioned way. # \$tally[\$index] = \$tally[\$index] + 1; # Does not work: Loops to attempt to change \$index and values are aways unaffected \$tally[\$index] = isset(\$tally[\$index])?\$tally[\$index]:0+1; \$tally[\$index] = isset(\$tally[\$index])?\$tally[\$index]:0+1; \$tally[\$index] = isset(\$tally[\$index])?\$tally[\$index]:0+1; /* # These three lines output: Array (     [1] => 1 ) */ # Works: This is what I need/expect # \$tally[\$index] = 1+(isset(\$tally[\$index])?\$tally[\$index]:0); print_r(\$tally); ?> The second block obviously does not work what one expects. Third part is good. ```
11
bishop
11 years ago
``` When you want to know if two arrays contain the same values, regardless of the values' order, you cannot use "==" or "===".  In other words:<?php(array(1,2) == array(2,1)) === false;?>To answer that question, use:<?phpfunction array_equal(\$a, \$b) {    return (is_array(\$a) && is_array(\$b) && array_diff(\$a, \$b) === array_diff(\$b, \$a));}?>A related, but more strict problem, is if you need to ensure that two arrays contain the same key=>value pairs, regardless of the order of the pairs.  In that case, use:<?phpfunction array_identical(\$a, \$b) {    return (is_array(\$a) && is_array(\$b) && array_diff_assoc(\$a, \$b) === array_diff_assoc(\$b, \$a));}?>Example:<?php\$a = array (2, 1);\$b = array (1, 2);// true === array_equal(\$a, \$b);// false === array_identical(\$a, \$b);\$a = array ('a' => 2, 'b' => 1);\$b = array ('b' => 1, 'a' => 2);// true === array_identical(\$a, \$b)// true === array_equal(\$a, \$b)?>(See also the solution "rshawiii at yahoo dot com" posted) ```
12
Hayley Watson
10 years ago
``` Note that the "ternary operator" is better described as the "conditional operator". The former name merely notes that it has three arguments without saying anything about what it does. Needless to say, if PHP picked up any more ternary operators, this will be a problem."Conditional Operator" is actually descriptive of the semantics, and is the name historically given to it in, e.g., C. ```
11
alan dot g at nospam dot net
7 years ago
``` a function to help settings default values, it returns its own first non-empty argument :make your own eor combos !<?php/* * Either Or * * usage:  \$foo = eor(test1(),test2(),"default"); * usage:  \$foo = eor(\$_GET['foo'], foogen(), \$foo, "bar"); */function eor() {    \$vars = func_get_args();     while (!empty(\$vars) && empty(\$defval))             \$defval = array_shift(\$vars);               return \$defval;} ?> ```
15
stepheneliotdewey at gmail [period] com
11 years ago
``` Note that typecasting will NOT prevent the default behavior for converting two numeric strings to numbers when comparing them. e.g.: <?php if ((string) '0123' == (string) '123')     print 'equals'; else     print 'doesn\'t equal'; ?> Still prints 'equals' As far as I can tell the only way to avoid this is to use the identity comparison operators (=== and !==). ```
17
fernandoleal at dragoncs dot com
11 years ago
``` If you need nested ifs on I var its important to group the if so it works.Example:<?php//Dont Works//Parse error: parse error, unexpected ':' \$var='<option value="1" '.\$status == "1" ? 'selected="selected"' :''.'>Value 1</option>'; //Works: \$var='<option value="1" '.(\$status == "1" ? 'selected="selected"' :'').'>Value 1</option>';echo \$var;?> ```
13
gondo
3 years ago
``` beware of the fact, that there is no `<==` nor `>==` therefore `false <= 0` will be `true`. php v. 5.4.27 ```
11
kapoor_rajiv at hotmail dot com
8 years ago
``` A quick way to do mysql bit comparison in php is to use the special character it stores . e.g<?php                                        if (\$AvailableRequests['OngoingService'] == '')                                            echo '<td>Yes</td>';                                        else                                            echo '<td>No</td>';?> ```
jeronimo at DELETE_THIS dot transartmedia dot com
13 years ago
``` For converted Perl programmers: use strict comparison operators (===, !==) in place of string comparison operators (eq, ne). Don't use the simple equality operators (==, !=), because (\$a == \$b) will return TRUE in many situations where (\$a eq \$b) would return FALSE. For instance... "mary" == "fred" is FALSE, but "+010" == "10.0" is TRUE (!) In the following examples, none of the strings being compared are identical, but because PHP *can* evaluate them as numbers, it does so, and therefore finds them equal... <?php echo ("007" == "7" ? "EQUAL" : "not equal"); // Prints: EQUAL // Surrounding the strings with single quotes (') instead of double // quotes (") to ensure the contents aren't evaluated, and forcing // string types has no effect. echo ( (string)'0001' == (string)'+1.' ? "EQUAL" : "not equal"); // Prints: EQUAL // Including non-digit characters (like leading spaces, "e", the plus // or minus sign, period, ...) can still result in this behavior, if // a string happens to be valid scientific notation. echo ('  131e-2' == '001.3100' ? "EQUAL" : "not equal"); // Prints: EQUAL ?> If you're comparing passwords (or anything else for which "near" precision isn't good enough) this confusion could be detrimental. Stick with strict comparisons... <?php // Same examples as above, using === instead of == echo ("007" === "7" ? "EQUAL" : "not equal"); // Prints: not equal echo ( (string)'0001' === (string)'+1.' ? "EQUAL" : "not equal"); // Prints: not equal echo ('  131e-2' === '001.3100' ? "EQUAL" : "not equal"); // Prints: not equal ?> ```
12
user@example
13 years ago
``` With Nested ternary Operators you have to set the logical  parentheses to get the correct result.<?php\$test=true;\$test2=true;(\$test) ? "TEST1 true" :  (\$test2) ? "TEST2 true" : "false";?>This will output: TEST2 true;correct:<?php\$test=true;\$test2=true;(\$test) ? "TEST1 true" : ((\$test2) ? "TEST2 true" : "false");?>Anyway don't nest them to much....!! ```
hiroh2k at yahoo dot com
13 years ago
``` if you want to use the ?: operator, you should be careful with the precedence. Here's an example of the priority of operators: <?php echo 'Hello, ' . isset(\$i) ? 'my friend: ' . \$username . ', how are you doing?' : 'my guest, ' . \$guestusername . ', please register'; ?> This make "'Hello, ' . isset(\$i)" the sentence to evaluate. So, if you think to mix more sentences with the ?: operator, please use always parentheses to force the proper evaluation of the sentence. <?php echo 'Hello, ' . (isset(\$i) ? 'my friend: ' . \$username . ', how are you doing?' : 'my guest, ' . \$guestusername . ', please register'); ?> for general rule, if you mix ?: with other sentences, always close it with parentheses. ```
11
Alex
11 years ago
``` I think everybody should read carefully what "jeronimo at DELETE_THIS dot transartmedia dot com" wrote. It's a great pitfall even for seasoned programmers and should be looked upon with a great attention.For example, comparing passwords with == may result in a very large security hole.I would add some more to it:The workaround is to use strcmp() or ===.Note on ===:While the php documentation says that, basically,(\$a===\$b)  is the same as  (\$a==\$b && gettype(\$a) == gettype(\$b)),this is not true.The difference between == and === is that === never does any type conversion. So, while, according to documentation, ("+0.1" === ".1") should return true (because both are strings and == returns true), === actually returns false (which is good). ```
sgurukrupa at gmail dot com
3 years ago
``` With respect to using the ternary operator as a 'null-coalescing' operator: expr1 ?: expr2, note that expr1 is evaluated only once. ```
j-a-n at gmx dot de
6 years ago
``` Please be careful when comparing strings with floats, especally when you are using the , as decimal.<?phpvar_dump(\$alt);var_dump(\$neu);var_dump(\$alt == \$neu);?>string(9) "590217,73" float(590217,73) bool(false) not the float is cast to a string and then string-compared, but the string is cast to a float and then float-compared. to compare as strings use strval!<?phpvar_dump(strval(\$alt));var_dump(strval(\$neu));var_dump(strval(\$alt) == strval(\$neu));?>string(9) "590217,73" string(9) "590217,73" bool(true) ```
zak at minion dot net
6 years ago
``` be careful when trying to concatenate the result of a ternary operator to a string <?php print '<div>'.(FALSE) ? 'TRUE [bad ternary]' : 'FALSE [bad ternary]'; print '<br><br>'; print '<div>'.((FALSE) ? 'TRUE [good ternary]' : 'FALSE [good ternary]'); ?> yields: TRUE [bad ternary] FALSE [good ternary] this is because the ternary evaluates '<div>'.(FALSE) not (FALSE) - so the end result is TRUE ```
Marcin Kuzawiski
2 years ago
``` A < B and still B < A...\$A = [1 => 1, 2 => 0, 3 => 1];\$B = [1 => 1, 3 => 0, 2 => 1];var_dump(\$A < \$B);  // TRUEvar_dump(\$B < \$A);  // TRUEvar_dump(\$A > \$B);  // TRUEvar_dump(\$B > \$A);  // TRUENext - C and D are comparable, but neither C < D nor D < C (and still C != D)...\$C = [1 => 1, 2 => 1, 3 => 0];\$D = [1 => 1, 3 => 1, 2 => 0];var_dump(\$C < \$D); // FALSEvar_dump(\$D < \$C); // FALSEvar_dump(\$C > \$D); // FALSEvar_dump(\$D > \$C); // FALSEvar_dump(\$D == \$C); // FALSE ```
email at kleijn dot jp
6 years ago
``` Maybe i am overlooking something but it seems to me that using unset(string) inside a ternary operator creates an error.((\$var1==0 && \$var2==0)?unset(\$var3):\$var3=\$var1+\$var2);result:Parse error: syntax error, unexpected T_UNSETusing the traditional form of IF...ELSE works normal.if(\$var1==0 && \$var2==0) { unset(\$var3); }else { \$var3=\$var1+\$var2; }result:This unsets var3 or creates a sum of var1+var2 for var3JP KleijnNetherlands ```
taras dot bogach at gmail dot com
7 years ago
``` Boolean switch usege <?php class User_Exception extends Exception{} class User{   public function register(\$login,\$pass,\$passCheck)     switch(false){       case(strlen(\$pass) >= 5):         throw new User_Exception("Password must be at last 5 chars length");       case(\$pass == \$passCheck):         throw new User_Exception("Password is not confirmed!");       case(strlen(\$login) >= 5):         throw new User_Exception("Login must be at last 5 chars length");       //Do other checks       default:         //Do registration         return true;     }   }   //... } ?> ```
damien dot launay dot mail at gmail dot com
4 years ago
``` I found a nice way to use of new "?:" operator:\$a = array();\$a['foo'] = 'oof';\$b = @ (\$a['foo'] ?: 'No foo');\$c = @ (\$a['bar'] ?: 'No bar');var_dump(\$b, \$c);Output:string(3) "oof"string(6) "No bar"No error is thrown and \$c is set with correct value.Benefit: no need to use isset. ```
prezire at gmail dot com
2 years ago
``` Take note when grouping ternary operations that return either boolean or integer concatenated to a string:<?php  echo 'hello ' . true ? 1 : 0, //Outputs 1       'hello ' . (true ? 1 : 0); //Outputs hello 1?> ```
Boolean_Type
3 years ago
``` Nice and helpful article!)I would like to ask:number == null     - it converts both types of comparisons to a boolean or numeric type? In the table the author pointed out that to a boolean. But elsewhere I read that to a numeric type. ```
5 years ago
``` it looks thatif you check 0 against a string with == then PHP returns true:php -r 'var_dump(0 == "statuses");'-> returns TRUEbut not if your string has a number at the beginning:php -r 'var_dump(0 == "2statuses");'-> returns FALSEfrom the specs I get it that it attempts a conversion - in this case the string to number.so better use ===as always :) ```
Anonymous
9 years ago
``` Here is some ternary trick I like to use for selecting a default value in a set of radio buttons. This example assumes that a prior value was known and that we are offering a user the chance to edit that prior value. If no prior value was actually known, no default value will be set.<form><input type='radio' name='gender' value='m' <?=(\$gender=='m')?"checked":""?>>Male<input type='radio' name='gender' value='f' <?=(\$gender=='f')?"checked":""?>>Female</form>When a "=" directly follows a "<?" (no space allowed in between -- the trick does not work with "<?php"), the right side of the operand (here, the result of the ternary operation) is printed out as text into the surrounding HTML code. If using "<?php" form, you will need to do "<?php echo exp1?exp2:exp3 ?>" instead. ```
Amaroq
9 years ago
``` Most of the time, you may be content with your conditionals evaluating to true if they are evaluating a non-false, non-zero value. You may also like it when they evaluate to false when you use the number 0.However, there may be times where you want to make a distinction between a non-false value and a boolean true. You may also wish to make a distinction between a boolean false and a zero.The identity operator can make this distinction for you.<?php\$a = 'some string';\$b = 123;\$c = 0;if(\$a && \$b && (!\$c)){ echo "True.\n"; } else { echo "False.\n"; }if(\$a == true && \$b == true && \$c == false){ echo "True.\n"; } else { echo "False.\n"; }if(\$a === true || \$b === true || \$c === false){ echo "True.\n"; } else { echo "False.\n"; }?>The above code outputs the following:True.True.False.As you can see, in the first two cases, \$a and \$b are considered true, while \$c is considered false. If this wasn't the case, neither of the first two conditionals would have echoed "True."In the last case, I've cleverly used the || operator to demonstrate that both \$a and \$b do not evaluate to true with the identity operator, nor does \$c evaluate to false.The === operator can be used to distinguish boolean from non-boolean values. ```
wbcarts at juno dot com
5 years ago
``` COMPARING PHP OBJECTS (compound type)We have seen that PHP does a lot of type-juggling on its own -- which can wreak havoc in unexpected ways -- but it is still up to us to produce code that is clear, maintainable AND follows the rules we want to follow.When creating a PHP Object, it is sometimes unclear what makes two of them the same. But the good part is that we can say what is equal and what is not equal. For example, let's say we have a Student class that includes an equals() method which defines what is equal for this type of object.<?php#Student.phpclass Student{  /*   * These variables are protected to prevent outside code   * from tampering with them.   */  protected \$student_id;  protected \$student_name;  public function __construct(\$id, \$name)  {    \$this->student_id = (int)\$id;          // cast to integer here    \$this->student_name = (string)\$name;   // cast to string here  }  /*   * This function requires an instance of type Student and   * only evaluates two integers that we set in __construct().   */  public function equals(Student \$student)  {    return (\$this->getId() == \$student->getId());  }  public function getId()  {    return \$this->student_id;  }  public function getName()  {    return \$this->student_name;  }  public function __toString()  {    return 'Student [id=' . \$this->getId() .    ', name=' . \$this->getName() . ']';  }}?>With this class, the protected variables cannot be tampered with by outside code. Also, the __construct() function casts the variables to the PHP primitives WE WANT, while the equals(Student \$student) function, requires an argument of type Student -- which eliminates the need for an IDENTITY '===' check AND prevents any other data types from coming in. One other note: notice how the equals() function only evaluates the \$student_id, this allows for two students to have the same name -- which is totally possible.Here's a short example -- we'll do it correctly AND try to screw it up!<?phprequire('Student.php');\$s1 = new Student(122, 'John Doe');\$s2 = new Student(344, 'John Doe');echo \$s1 . '<br>';  // Student [id=122, name=John Doe]echo \$s2 . '<br>';  // Student [id=344, name=John Doe]# Check for equality the CORRECT way...echo (\$s1->equals(\$s2) ? 'EQUAL' : 'NOT EQUAL');  // NOT EQUAL# Check for equality by HACKING the known value of \$student_id...echo (\$s1->equals(122) ? 'EQUAL' : 'NOT EQUAL');  // Catchable fatal error: Argument 1 passed to Student::equals() must be an instance of Student, integer given... etc, etc.?>See what I mean by writing code that follows OUR RULES? The Student class does the kind of type-juggling we want (and when we want it done) -- NOT when, where, or why PHP does it (not that there's anything wrong with it). ```
Mark Simon
6 years ago
``` The use of 5.3’s shortened ternary operator allows PHP to coalesce a null or empty value to an alternative:\$value = \$planA ?: \$planB;My own server doesn’t yet run 5.3. A nice alternative is to use the “or” operator:\$value = \$planA or \$value = planB; ```
monkuar at gmail dot com
8 years ago
``` U can even add a variable on that if u wish:(\$Profile['skinstyle']=='0')? \$lol = "selected":"";then call it out.. alot faster. if u use EOF.. and such like on ibp :( ```
niall at maranelda dot org
3 months ago
``` Care must be taken when using the spaceship operator with arrays that do not have the same keys:- Contrary to the notes above ("Example #2 Transcription of standard array comparison"), it does *not* return null if the left-hand array contains a key that the right-hand array does not.- Because of this, the result depends on the order you do the comparison in.For example:<?php\$a = ['a' => 1, 'b' => 2, 'c' => 3, 'e' => 4];\$b = ['a' => 1, 'b' => 2, 'd' => 3, 'e' => 4];var_dump(\$a <=> \$b);        // int(1) : \$a > \$b because \$a has the 'c' key and \$b doesn't.var_dump(\$b <=> \$a);        // int(1) : \$b > \$a because \$b has the 'd' key and \$a doesn't.?> ```
mail at markuszeller dot com
7 years ago
``` I prefer writing (!\$a == 'hello') much more than (\$a != 'hello'), but I wondered about the performance. So I did a benchmark: <?php for(\$bench = 0; \$bench < 3; \$bench++) {     \$start = microtime(true);     \$a = 1;     for(\$i = 0; \$i < 100000000; \$i++)   {         if(!\$a == 'hello') \$b++;     }     \$end = microtime(true);     echo "Used time: " . (\$end-\$start) . "\n"; } ?> and it results with # if(\$a != 'hello') Used time: 12.552895069122 Used time: 12.548940896988 Used time: 12.470285177231 # if(!\$a == 'hello') Used time: 7.6532161235809 Used time: 7.6426539421082 Used time: 7.6452689170837 ```
ahmad dot mayahi at gmai dot com
18 days ago
``` (and) and (&&) have a slightly different behavior when it comes to comparison.(&&) and (=) have higher precedence than (and), in the following code:<?php\$res = true and false;var_dump(\$res); //Returns: true?>But why? It's because (=) has a higher precedence than (and):<?php(\$res = true) and false;var_dump(\$rest); //Returns: true?>But not for:<?php\$bool = true && false;var_dump(\$bool); //Returns false?>Please note that (or) act the same as (and). ```
Hayley Watson
1 month ago
``` One-line handling for caching lazily-evaluated values:<?phpprivate \$cachedSomething = null;public function getSomething(){    return \$this->cachedSomething ?? (\$this->cachedSomething = \$this->calculateSomething());}?> ```
-2
fr at felix-riesterer dot de
9 months ago
``` I wanted to see if two arrays carry the same information even if they are technically different, so I created the following function. Hopefully this is useful to somebody.Note: This is a different approach than "rshawiii at yahoo dot com" has taken.<?php/** * function to compare the contents of two arrays * * This function returns true if all the following are true: * - arrays' values match * - arrays' keys match * - keys-value pairs are the same in both arrays * * The order of the key-value pairs does not matter, so even if * (\$array1 == \$array2) is technically false, this function might * still return true like in the following examples: * * \$a = array(1, 5, 8); * \$b = array(5, 1, 8); * => true * * \$a = array('a' => 1, 'b' => 2, 'c' => 'xyz'); * \$b = array('a' => 1, 'c' => 'xyz', 'b' => 2); * => true * * \$a = array(4 => 1, 7 => 2, 12 => 'xyz'); * \$b = array(9 => 2, 3 => 1, 123 => 'xyz'); * => false * * @param array * @param array * @return bool matching */function same_array_contents(\$a, \$b) {    // easy    if (count(\$a) != count(\$b)) {        return false;    }    // complicated 1: different values    \$a_values = array_values(\$a);    \$b_values = array_values(\$b);    sort(\$a_values);    sort(\$b_values);    if (\$a_values != \$b_values) {        return false;    }    // complicated 2: different index names    \$a_keys = array_keys(\$a);    \$b_keys = array_keys(\$b);    sort(\$a_keys);    sort(\$b_keys);    if (\$a_keys != \$b_keys) {        return false;    }    // complicated 3 (same values and same keys): key => value different?    \$r = true; // expect match    if (array_keys(\$a_keys) != \$a_keys        || array_keys(\$b_keys) != \$b_keys    ) {        // associative array(s)        foreach (\$a_keys as \$key) {            if (\$a[\$key] != \$b[\$key]) {                \$r = false;            }        }    }    return \$r;}?> ```
me at lx dot sg
7 years ago
``` Replying to the comment on Aug 6, 2010, the comparisons return TRUE because they are recognized as numerical strings and are converted to integers. If you try "abc" == " abc", it will return FALSE as expected. To avoid the type conversions, simply use the identity operator (===). ```
webmaster __AT__ digitalanime __DOT__ nl
13 years ago
``` WARNING!!!!Let's say, we have this little script:<?php\$username = 'Me';\$guestusername = 'Guest';echo 'Hello, ' . isset(\$i) ? 'my friend: ' . \$username . ', how are you doing?' : 'my guest, ' . \$guestusername . ', please register';?>What you want:If \$i is set, display:Hello, my friend: Me, how are you doing?If not, display:Hello, my guest, Guest, please registerBUT, you DON'T get that result!If \$i is set, you get this:my friend: Me, how are you doing? (so, there's not "Hello, " before it)If \$i is NOT set, you get this:my friend: Me, how are you doing?So... That's the same!You can solve this by using the "(" and ")" to give priority to the ternary operator:<?php\$username = 'Me';\$guestusername = 'Guest';echo 'Hello, ' . (isset(\$i) ? 'my friend: ' . \$username . ', how are you doing?' : 'my guest, ' . \$guestusername . ', please register');?>When \$i is set, you get this:Hello, my friend: Me, how are you doing? (expected)When \$i is NOT set, you get this:Hello, my guest, Guest, please register (expected too)So.. Please, don't be dumb and ALWAYS use the priority-signs (or.. How do you call them?), ( and ).By using them, you won't get unneeded trouble and always know for sure your code is doing what you want: The right thing. ```
-1
pcdinh at phpvietnam dot net
11 years ago
``` You should be very careful when using == with an result set returned from a query that can be an empty array, multi-dimensional array or a boolean false value (if the query failed to execute). In PHP, an empty array is equivalent to true. <?php \$myArray = array(); // check if there is any error with the query if (\$myArray == false) {     echo "Yes"; } ?> return Yes Use === instead. ```
-2
ISAWHIM
8 years ago
``` When it comes to formatting structure of the conditional statements, I found this to work best and retain logic in views... <?php \$z = 2; \$text = (\$z===1 ? 'ONE'   : (\$z===2 ? 'TWO'   : (\$z===3 ? 'THREE'   : 'MORE' ))); echo(\$text); // RESULT='TWO' // LONGHAND \$z = 2; \$text = (\$z===1?'ONE' : (\$z===2?'TWO' : (\$z===3?'THREE' : 'MORE'))); echo(\$text); // RESULT='TWO' ?> Since this is expected to test logic, and nothing more, only use it to test logic. To test order, if you ever forget... <?php \$z = 1; \$text = (\$z===1 ? 'FIRST : OUTTER'   : (\$z===1 ? 'SECOND : INNER'   : (\$z===1 ? 'THIRD : LAST'   : 'FAIL EVAL DEFAULT' ))); echo(\$text); // RETURN='FIRST : OUTTER' \$z = 2; \$text = (\$z===1 ? 'FIRST : OUTTER'   : (\$z===1 ? 'SECOND : INNER'   : (\$z===1 ? 'THIRD : LAST'   : 'FAIL EVAL DEFAULT' ))); echo(\$text); // RETURN='FAIL EVAL DEFAULT' ?> (IF ? THEN : ELSE) (IF ? THEN : ELSE(IF ? THEN : ELSE(IF ? THEN : ELSE)) That can't be read from inside to out, unlike a math formula, because the logic in comparison is not the same. In math nesting, you need the solution to the deepest nested element first. In logic comparison, you always start outside before you compare inside. (Logically, IF there is no door THEN you need something ELSE to get inside. Oh, there is a window... We are inside, now IF there is a fridge THEN open it or ELSE you starve.) ```
-2
Hayley Watson
2 years ago
``` When the comparison rules for the spaceship operator say that for "object<=>anything" the object is always greater, and for "array<=>anything" the array is always greater.The rules should be used in the order they are listed. In the latter case, "anything" means "anything except an object".The former rule says that "object<=>array" will always decide that the object is greater (and evaluate to a positive integer); to be consistent, the comparison "array<=>object" must also always decide that the object is greater (and evaluate to a negative integer). ```
-3
pinkgothic at gmail dot com
8 years ago
``` "Array with fewer members is smaller, if key from operand 1 is not found in operand 2 then arrays are uncomparable, otherwise - compare value by value (see following example)."The example covers this behaviour, but it isn't immediately obvious, so:If you're doing loose comparisons in PHP, note that they differ from checking each value individually like \$value1==\$value2 by adding what amounts to an empty(\$value1)==empty(\$value2) check into the mix. I found this out by investigating some (to me) bizarre behaviour.[Note that the example contains no ==, just > and <. It's its absence that perceivedly 'causes empty() to fire'.]I was also pleasantly surprised to see PHP recurse. Also clear if you keep in mind that the example implies another function call to itself with > and < if both operands are arrays, but IMO definitely worth stating.It might also be worth noting that the order of array keys doesn't matter, even if a foreach() would see a 'different' array. Again, covered by the example, but might be worth stressing. ```
-8
Hayley Watson
9 years ago
``` The cast from null to boolean is documented (on the page describing the boolean type: null->false), and so is the cast from boolean to integer (on the page describing the integer type: false->0), but the cast from null to integer is undefined and the fact that it is currently implemented by casting from null to boolean and then from boolean to integer is explicitly documented (on the page describing the integer type) as something that should not be relied on (so null==0 is true only by accident, but ((int)(bool)null)==0 is true per specification).Perhaps as well as a "Converting to integer" section on the integer type page there should also be a "Converting from integer" section; similarly for the other types. ```
-6
Anonymous
11 years ago
``` Since php 5.2 the operator == for object vs object is not recursion safe, it will cause a fatal error if one of the objects contains a refernce to it self (indirect refferences also counts here).If you are just checking if two object pointers points to the same object use === instead and aviod this issue (you might get a minimal speed bost too). ```
-10
ken at smallboxsoftware net
10 years ago
``` This seems a bit odd to me, but PHP can convert two strings into integers during comparison.  For example: "700" == "+700" return true even though they are totally different strings. Use === or strcmp when comparing two strings to ensure that they remain as strings during comparison. ```
-12
sven dot heyll at web dot de
13 years ago
``` Hi folks, to the float comparison problem... This worked for me: <?php //! compare two floating point values, return true if they are equal //! (enough) or false otherwise function float_equal(\$f1, \$f2) {     return (\$f1 > \$f2) ? (false) : (!(\$f1 < \$f2)); } // compare floats \$f1 = 0.037; \$f2 = 1000387.978; echo "\$f1 and \$f2 are ".(float_equal(\$f1,\$f2)?("equal"):("not equal"))."<br />"; \$f1 = 0.3; \$f2 = 0.3;    echo "\$f1 and \$f2 are ".(float_equal(\$f1,\$f2)?("equal"):("not equal"))."<br />"; ?> ```