PHP 5.4.36 Released

imagewbmp

(PHP 4 >= 4.0.1, PHP 5)

imagewbmpInvia l'immagine al browser o in un file

Descrizione

bool imagewbmp ( resource $image [, string $filename [, int $foreground ]] )

imagewbmp() outputs or save a WBMP version of the given image.

Elenco dei parametri

image

Una risorsa immagine, restituita da una delle funzioni di creazione immagine, come imagecreatetruecolor().

filename

Il percorso in cui salvare il file. Se non è impostato o è NULL, viene restituito il flusso raw dell'immagine.

foreground

You can set the foreground color with this parameter by setting an identifier obtained from imagecolorallocate(). The default foreground color is black.

Valori restituiti

Restituisce TRUE in caso di successo, FALSE in caso di fallimento.

Esempi

Example #1 Outputting a WBMP image

<?php
// Create a blank image and add some text
$im imagecreatetruecolor(12020);
$text_color imagecolorallocate($im2331491);
imagestring($im155,  'A Simple Text String'$text_color);

// Set the content type header - in this case image/vnd.wap.wbmp
// Hint: see image_type_to_mime_type() for content-types
header('Content-Type: image/vnd.wap.wbmp');

// Output the image
imagewbmp($im);

// Free up memory
imagedestroy($im);
?>

Example #2 Saving the WBMP image

<?php
// Create a blank image and add some text
$im imagecreatetruecolor(12020);
$text_color imagecolorallocate($im2331491);
imagestring($im155,  'A Simple Text String'$text_color);

// Save the image
imagewbmp($im'simpletext.wbmp');

// Free up memory
imagedestroy($im);
?>

Example #3 Outputting the image with a different foreground

<?php
// Create a blank image and add some text
$im imagecreatetruecolor(12020);
$text_color imagecolorallocate($im2331491);
imagestring($im155,  'A Simple Text String'$text_color);

// Set the content type header - in this case image/vnd.wap.wbmp
// Hint: see image_type_to_mime_type() for content-types
header('Content-Type: image/vnd.wap.wbmp');

// Set a replacement foreground color
$foreground_color imagecolorallocate($im25500);

imagewbmp($imNULL$foreground_color);

// Free up memory
imagedestroy($im);
?>

Note

Nota:

WBMP support is only available if PHP was compiled against GD-1.8 or later.

Vedere anche:

  • image2wbmp() - Rende disponibile l'immagine per il browser o la salva in un file
  • imagepng() - Output a PNG image to either the browser or a file
  • imagegif() - Invia l'immagine al browser o in un file
  • imagejpeg() - Invia l'immagine al browser o in un file
  • imagetypes() - Return the image types supported by this PHP build

add a note add a note

User Contributed Notes 2 notes

up
0
andre at bynetworld dot com
7 years ago
In the previous note by -> lukeross at sys3175 dot co dot uk <- there is a coding error in the for() loops. After correcting the error, I found that this function did a great job of  converting color images to 2 colors.
The following is the corrected function code:

function ImageColorFloydSteinberg($dst_img, $src_img) {
    ImageColorAllocate($dst_img, 0,0,0);
    ImageColorAllocate($dst_img, 255,255,255);
    $isx = ImageSX($src_img);
    $isy = ImageSY($src_img);
    $grey_img = ImageCreate($isx, $isy);
    for ($a = 0; $a <= 255; $a++) ImageColorAllocate($grey_img, $a,$a,$a);
    $isx -= 1; // To correct pixel count in source image width starting from 0
    $isy -= 1; // Correcting pixel count in source image height starting from 0
    for($x = 0; $x <= $isx; $x++) {
        for($y = 0; $y <= $isy; $y++) {
            $color = ImageColorsForIndex($src_img, ImageColorAt($src_img, $x, $y));
            $greyscale = .299 * $color["red"] + .587 * $color["green"] + .114 * $color["blue"];
            ImageSetPixel($grey_img, $x, $y, ImageColorClosest($grey_img, $greyscale, $greyscale, $greyscale));
        }
    }
    for($x = 0; $x <= $isx; $x++) {
        for($y = 0; $y <= $isy; $y++) {
            $color = ImageColorsForIndex($grey_img, ImageColorAt($grey_img, $x, $y));
            if ($color["red"] > 128) {
                ImageSetPixel($dst_img, $x, $y, ImageColorClosest($dst_img,255,255,255));
                $err = $color["red"] - 255;
            } else {
                ImageSetPixel($dst_img, $x, $y, ImageColorClosest($dst_img,0,0,0));
                $err = $color["red"];
            }
            if ($x != $isx) {
                $color2 = ImageColorsForIndex($grey_img, ImageColorAt($grey_img, $x+1, $y));
                $newgrey = $color2["red"] + $err * 7 / 16;
                ImageSetPixel($grey_img, $x+1, $y, ImageColorClosest($grey_img,$newgrey, $newgrey, $newgrey));
            }
            if ($x != 0) {
                $color2 = ImageColorsForIndex($grey_img, ImageColorAt($grey_img, $x-1, $y));
                $newgrey = $color2["red"] + $err * 3 / 16;
                ImageSetPixel($grey_img, $x-1, $y, ImageColorClosest($grey_img,$newgrey, $newgrey, $newgrey));
            }
            if ($y != $isy) {
                $color2 = ImageColorsForIndex($grey_img, ImageColorAt($grey_img, $x, $y+1));
                $newgrey = $color2["red"] + $err * 5 / 16;
                ImageSetPixel($grey_img, $x, $y+1, ImageColorClosest($grey_img,$newgrey, $newgrey, $newgrey));
            }
            if ($x != $isx && $y != $isy) {
                $color2 = ImageColorsForIndex($grey_img, ImageColorAt($grey_img, $x+1, $y+1));
                $newgrey = $color2["red"] + $err / 16;
                ImageSetPixel($grey_img, $x+1, $y+1, ImageColorClosest($grey_img,$newgrey, $newgrey, $newgrey));
            }
          
        }
    }
    imagedestroy($grey_img);
}
up
0
lukeross at sys3175 dot co dot uk
12 years ago
As has been commented before, GD doesnt do a very good translation to 2-colours, especially for photos.  The following routine converts to two colours, I believe using error diffusion (the algorithm's nicked off news).  It's slow, but just about adequate for small images and low load.  I suspect it can be made much more efficient :-)

function ImageColorFloydSteinberg($dst_img, $src_img) {
    ImageColorAllocate($dst_img, 0,0,0);
    ImageColorAllocate($dst_img, 255,255,255);
    $grey_img = ImageCreate(ImageSX($src_img), ImageSY($src_img));
    for ($a = 0; $a <= 255; $a++) ImageColorAllocate($grey_img, $a,$a,$a);
    for($x = 0; $x <= ImageSX($src_img); $x++) {
        for($y = 0; $y <= ImageSY($src_img); $y++) {
            $color = ImageColorsForIndex($src_img, ImageColorAt($src_img, $x, $y));
            $greyscale = .299 * $color["red"] + .587 * $color["green"] + .114 * $color["blue"];
            ImageSetPixel($grey_img, $x, $y, ImageColorClosest($grey_img, $greyscale, $greyscale, $greyscale));
        }
    }
    for($x = 0; $x <= ImageSX($src_img); $x++) {
        for($y = 0; $y <= ImageSY($src_img); $y++) {
            $color = ImageColorsForIndex($grey_img, ImageColorAt($grey_img, $x, $y));
            if ($color["red"] > 128) {
                ImageSetPixel($dst_img, $x, $y, ImageColorClosest($dst_img,255,255,255));
                $err = $color["red"] - 255;
            } else {
                ImageSetPixel($dst_img, $x, $y, ImageColorClosest($dst_img,0,0,0));
                $err = $color["red"];
            }
            if ($x != ImageSx($src_img)) {
                $color2 = ImageColorsForIndex($grey_img, ImageColorAt($grey_img, $x+1, $y));
                $newgrey = $color2["red"] + $err * 7 / 16;
                ImageSetPixel($grey_img, $x+1, $y, ImageColorClosest($grey_img,$newgrey, $newgrey, $newgrey));
            }
            if ($x != 0) {
                $color2 = ImageColorsForIndex($grey_img, ImageColorAt($grey_img, $x-1, $y));
                $newgrey = $color2["red"] + $err * 3 / 16;
                ImageSetPixel($grey_img, $x-1, $y, ImageColorClosest($grey_img,$newgrey, $newgrey, $newgrey));
            }
            if ($y != ImageSy($src_img)) {
                $color2 = ImageColorsForIndex($grey_img, ImageColorAt($grey_img, $x, $y+1));
                $newgrey = $color2["red"] + $err * 5 / 16;
                ImageSetPixel($grey_img, $x, $y+1, ImageColorClosest($grey_img,$newgrey, $newgrey, $newgrey));
            }
            if ($x != ImageSx($src_img) && $y != ImageSy($src_img)) {
                $color2 = ImageColorsForIndex($grey_img, ImageColorAt($grey_img, $x+1, $y+1));
                $newgrey = $color2["red"] + $err / 16;
                ImageSetPixel($grey_img, $x+1, $y+1, ImageColorClosest($grey_img,$newgrey, $newgrey, $newgrey));
            }
           
        }
    }
    imagedestroy($grey_img);
}

To output your WBMP, use

ImageWBMP($final_img, "", ImageColorClosest(255,255,255));
To Top