PHP 5.6.30 Released


(PHP 4 >= 4.0.7, PHP 5, PECL odbtp >= 1.1.1)

mssql_execute Esegue una procedura memorizzata su un database MS SQL


mixed mssql_execute ( resource $stmt [, bool $skip_results ] )

Questa funzione, al momento non è documentata; è disponibile soltanto la lista degli argomenti.

Nota: Se le stored procedure restituiscono parametri oppure valori, questi saranno disponibili successivamente all'esecuzione della funzione mssql_execute() a meno che non sia restituito più di un set di risultati. In questo caso occorre utilizzare mssql_next_result() per spostarsi tra i risultati. Una volta terminato lo scorrimento dei set di risultati, sia i parametri di output sia i valori di ritorno saranno disponibili.

Vedere anche mssql_bind(), mssql_free_statement() e mssql_init().

add a note add a note

User Contributed Notes 19 notes

4 years ago
Interesting little quirk I noticed:

You can't initialize, execute, and free stored procedures in a nested fashion. e.g this pattern:

= mssql_init('statement1');
//some binds and stuff
$statement2 = mssql_init('statement2');
//some binds and stuff


will fail when you execute statement 2.  Not only will it fail, but you won't get any results back from mssql_get_last_message(), so it's super-frustrating. The way around this is to rearrange the structure of your script so that stored procedures are executed sequentially.
Manda Krishna Srikanth
10 years ago
While using stored procedures on SQL EXPRESS (and perhaps on SQL Server), you have to specify the column names in SELECT, instead of asterisk (*). Or else you will get some big Unicode error.

That is, instead of "select * from table",
use "select col1, col2 from table".

One more important thing, Before using mssql_execute, you MUST AND SHOULD use mssql_init. mssql_init will generate the MS Sql statement resource, which will be taken as input by mssql_execute. Here is an example,

if($conn = mssql_connect('localhost\SQLEXPRESS', 'krishna', 'srikanth')) echo 'Connected to SQLEXPRESS';

mssql_select_db("Northwind",$conn)) echo 'Selected DB: Northwind<BR>';

$sql_statement mssql_init("[Ten Most Expensive Products]", $conn);

while (
$row = mssql_fetch_assoc($result))
ian_channing at hotmail dot com
5 years ago
Output parameters are cryptic to get out. Here's two examples, one if you have no results returned from your stored procedure, one if you do have results returned:
* using OUTPUT param with no results returned from stored procedure
$outParamValue = 0;
mssql_bind($stmt, '@'.$outParamName, $outParamValue, $outParamType, $is_output = true);
mssql_execute($stmt, $skip_results = true);
/* N.B. If you don't use $skip_results = true you must use mssql_next_result as below **even if there are no results returned from the stored procedure** */

* using OUTPUT param with one result set returned from stored procedure
$outParamValue = 0;
mssql_bind($stmt, '@'.$outParamName, $outParamValue, $outParamType, $is_output = true);
$result = mssql_execute($stmt);
$outParamValue); /* will still be 0 */
mssql_next_result($result); /* N.B. see the Note above about this */
echo($outParamValue); /* correct output */
geoff at spacevs dot com
8 years ago
In reply to: mark dot vanrossum at bris dot ac dot uk

A much simpler solution that allows you to keep the config in the PHP script is to force the TDS version by using putenv before you connect.

('TDSVER', '8.0');
$dbc = mssql_connect('', 'user', 'pass');
mark dot vanrossum at bris dot ac dot uk
9 years ago
I was pulling my hair out getting the error:
  "stored procedure execution failed"
when trying to run mssql_execute but you could run:
  $results = mssql_query('sp_test');

I was connecting using the string:
  $cn = mssql_connect($dbserver, $dbuser, $dbpass);

where xxx is the IP address.

It seems that this doesn't work, you need to do the following:
edit your freetds.conf file and add the connection in here, eg:
        port = 1433
        tds version = 8.0

Then try and connect as:
$cn = mssql_connect('YourServer', $dbuser, $dbpass);

And it should work.  No idea why it doesn't work before, took me hours to find this out!
5 years ago
SUBJECT: No OUTPUT parameter recieved on store procedure call.

If you call a store procedure who binds data to an OUTPUT parameter on a SQL Server 7 or later no response will be produced, or an error perhaps.

From the Free TDS documentation:

Output Parameters

I'm not getting my output parameters returned, but I seem to be doing everything right!

That's not a question!

Microsoft SQL Server 7 with SP3, and later versions, quietly changed (which is to say, broke) how they respond to queries that execute stored procedures with output parameters. Earlier servers let you send a query like EXECUTE A @P OUTPUT and fetch the output parameter as a special result row (technique varying by library). Newer servers simply don't send back that data. To elicit output parameters from them, you have to use the RPC protocols such as the DB-Library dbrpcparam.
whitep0wer at gmail dot com
5 years ago
When calling a stored procedure which is using OUTPUT parameters, be sure not to pass them as NULL in mssql_bind. If you do this, the data received in output gets truncated to one character.
stuhood at gmail doooot com
10 years ago
If you need to get Output params from your stored procedure, make sure to use FreeTDS > 0.6.4... it has a bug that prevents some Output params from being set.
mpoletto at gmail dot com
11 years ago
The constant SQLINT4 is not working with datetime. Try using SQLVARCHAR.
SQL dot User at Yandex dot Ru
12 years ago
To receive output parameter from the procedure which returns one or several recordsets, try this code:

mssql_bind($my_procedure, "@OutputParameter", SQLVARCHAR, true);
$result = mssql_execute($my_procedure);
while(mssql_next_recordset($result)) {
## do something

after listing last recordset output parameter will be available (strange...).

If you do not need output recordsets, just parameters, try this:

mssql_bind($my_procedure, "@OutputParameter", SQLVARCHAR, true);
$result = mssql_execute($my_procedure, true);

P.S. Tested on PHP 4.3.5.
brian_caughlin at hotmail dot com
13 years ago
Regarding Output Parameters and RETVAL: A change that appears to have begun around 4.3.

According to the documentation and previously posted comments, if a stored procedure returns only one Recordset, you could retrieve the RETVAL and Output Params right away.  THIS IS NO LONGER THE CASE.  Beginning around 4.3, you must always use the mssql_next_result() function if any recordset is returned at all.

If you consider the example posted below by fjortizATcomunetDOTes on 26-Dec-2001...


// Execute the Stored Proc

// Get the recordset
print ("Answer: " . $arr[0] . "
" );

// NEW for 4.3: Switch to the next Recordset
// Since there was only one recordset, it will return false...

// And now RETVAL and Output Params are accessible...
print ("RETVAL = $val ; intval = $ival ; floatval = $fval ; string = $sval");


There is also another way, and that is to use a new optional skip parameter on the execute.

mssql_execute($stmt, true);

This appears to ignore any recordsets, allowing you to get at the retval and output parameters immediately.

For more information, please see Bug #21089.
4 years ago
want to share with you that I had a hard time with mssql_execute on a platform that was running php using FastCGI. Well, I guess the problem was that mssql_init always returned null. So after investigating this, and plus the fact that I don't have total control over the platform, I gave up and used mssql_query instead.

Using the function below, it is possible to generate most stored procedure calls, with the added benefits that one doesn't have to worry to much about datatype mappings, and that the funtion return exception codes and error message. So here goes:

function _mssql_exec_sp($storedproc,$params) {
$varlist = "";
$setlist = "";
$parmlist = "";
$outs = "";
    foreach (
$params as $key => $value) {
$quote = strpos($value['type'],'char')!==false;
$varlist .= "@$key ".$value['type'].",\\n";
        if (isset(
$value['value'])) {
$setlist .= "set @".$key."=".($quote?"'":'').$value['value'].($quote?"'\\n":"\\n");
$paramlist .= " @".$key.(isset($value['out'])?' output,':',');
        if (isset(
$value['out'])) {
$outs .= "@$key as $key,";
    if (
strlen($paramlist)) {
$paramlist = substr($paramlist,0,strlen($paramlist)-1);
$stmt = "begin try\\n";
$stmt .= "declare\\n";
$stmt .= "@ret int";
    if (
strlen($varlist)) {
$stmt .= ",\\n";
$stmt .= $varlist;
$stmt = substr($stmt,0,strlen($stmt)-2);
    else {
$stmt .= "\\n";
$outs = "@ret as ret,".$outs;
$outs = substr($outs,0,strlen($outs)-1);

$stmt .= "\\n".$setlist;
$stmt .= "exec @ret = ".$storedproc.$paramlist."\\n";
$stmt .= "select ".$outs."\\n";
$stmt .= "end try\\n";
$stmt .= "begin catch\\n";
$stmt .= "select error_number() as ret,error_message() as errorMsg\\n";
$stmt .= "end catch\\n";

example call:

= array(
'socialid' => array(
'type' => 'char(10)',
'value' => $sid
'cust_name' => array(
'type' => 'varchar(20)',
'value' => 'our name'
'id' => array(
'type' => 'int',
'out' => true

$result = _mssql_exec_sp('sp_register_cust', $params);
$row = mssql_fetch_array($result);
berk0081 at umn dot edu
7 years ago
Regarding the "stored procedure execution failed" errors mentioned in previous posts -- in addition to using the data source name as defined in freetds.conf under Linux, you may encounter this error when attempting to call a stored procedure  after running a standard query with mssql_query()

Call mssql_free_result() before executing the stored procedure with mssql_execute() to clear this up.

= mssql_connect($host, $user, $pass);
mssql_select_db('somedb', $conn);

// Call a simple query
$result = mssql_query('SELECT * FROM sometable', $conn);

// Release the result resource

// Then execute the procedure
$proc = mssql_init('some_proc', $conn);
$proc_result = mssql_execute($proc);

// Etc...
13 years ago
The easiest way to use a stored procedure is:

$Result = mssql_query("StoredProcedureName Var1, Var2, Var3...");

$Result is then just like any other result set. You can get the output parameters by:

$arr = mssql_fetch_row($Result);

$OutputParam1 = $arr[0];
$OutputParam2 = $arr[1];
Anton Schattenfeld
9 years ago
To get info about table structure you can use such a query:

  information_schema.tables t
  information_schema.columns c
    t.table_catalog = c.table_catalog AND
    t.table_schema = c.table_schema AND
    t.table_name = c.table_name
  (c.table_name = 'TABLE_NAME')
marco dot carvalho at NOSPAM dot uni-yoga dot org dot br
12 years ago

/*This functions will help you to get SQLTYPES direct from systypes and you can associate them with PHPSQLTYPES. */

/* <font color="#007f00">Associete PHP types with systypes..xtypes,
   see <b>mssql_get_types()</b> </font>*/

$MSSQL_types[127] = SQLINT4;    /* bigint*/
$MSSQL_types[104] = SQLBIT;     /* bit*/
$MSSQL_types[175] = SQLCHAR;    /* char*/
$MSSQL_types[56]  = SQLINT2;    /* int*/
$MSSQL_types[52]  = SQLINT2;    /* smallint*/
$MSSQL_types[35]  = SQLTEXT;    /* text*/
$MSSQL_types[48]  = SQLINT1;    /* tinyint*/
$MSSQL_types[167] = SQLVARCHAR; /* varchar*/
$MSSQL_types[62]  = SQLFLT8;    /* float*/
$MSSQL_types[173] = SQLVARCHAR; /* binary*/         // Adaptation
$MSSQL_types[61]  = SQLINT4;    /* datetime*/       // Adaptation
$MSSQL_types[106] = SQLFLT8;    /* decimal*/        // Adaptation
$MSSQL_types[34]  = SQLVARCHAR; /* image*/          // Adaptation
$MSSQL_types[60]  = SQLFLT8;    /* money*/          // Adaptation
$MSSQL_types[239] = SQLCHAR;    /* nchar*/          // Adaptation
$MSSQL_types[99]  = SQLTEXT;    /* ntext*/          // Adaptation
$MSSQL_types[108] = SQLFLT8;    /* numeric*/        // Adaptation
$MSSQL_types[231] = SQLVARCHAR; /* nvarchar*/       // Adaptation
$MSSQL_types[59]  = SQLFLT8;    /* real*/           // Adaptation
$MSSQL_types[58]  = SQLINT4;    /* smalldatetime*/  // Adaptation
$MSSQL_types[122] = SQLFLT8;    /* smallmoney*/     // Adaptation
$MSSQL_types[98]  = SQLVARCHAR; /* sql_variant*/    // Adaptation
$MSSQL_types[189] = SQLINT4;    /* timestamp*/      // Adaptation
$MSSQL_types[165] = SQLVARCHAR; /* varbinary*/      // Adaptation

/* <font color="#007f00">Gets current connection systypes and shows this:

$MSSQL_types[systypes..xtype] = PutPHPSqlTypeHere  // Name_in_systypes //

function mssql_get_types(){
$res = mssql_query('select name,xtype from systypes');
$val = mssql_fetch_assoc($res))){
'$MSSQL_types['.$val['xtype']."]\t= ;\t/* ".$val['name']." */\n");

iqq-pp at extreme dot ro
13 years ago
php version 4.3.2

Take care when using stored procedures returning multiple results, seems that if the first result is empty, the pointer will be automatically moved to the next result. As in this example:

SELECT 0 as zero WHERE 0 = 1
SELECT 1 as one

After executing the stored procedure, mssql_num_rows will report one, ignoring the first result.
eliseo at olografix dot org
13 years ago
After many attempt I resolved the return output of a store procedure on Win2003 box, MSSQL7 and PHP 4.3.
I have problem to process the result from store procedure strCheckUser, and I must to set a R variable, that must be returned from the last select operation (Select @R as R) see below.

Store procedure to CheckUser Exist
CREATE PROC strCheckUser 
@AccountLO varchar(20) ,
@PasswordLO varchar(20)
IF (SELECT count(*) as count FROM tbl_users WHERE AccountLO = @AccountLO and PasswordLO=@PasswordLO
) = 0
SET @R = '0'

IF (SELECT count(*) as count FROM tbl_users WHERE AccountLO = @AccountLO  and PasswordLO=@PasswordLO
) = 1
SET @R = '1'


Select @R as R


This is the php page


$result=mssql_query("strCheckUser ".$AccountLO.", ".$PasswordLO."");
//echo gettype($result);
$arr = mssql_fetch_assoc($result);       
echo $arr["R"];


No $arr["R"] print 1 if the user exist and 0 if no exist

Thanks to duarte at uma dot pt for the suggestion
15 years ago
After initializing a stored procedure
with mssql_init, and binding all the
parameters (and return value if needed)
with mssql_bind, you can execute the
statement with mssql_execute.

- stmt: statement resource obtained with

From here, you can use any of the other
mssql_* functions to retrieve the
recordsets as if you had called
mssql_query. Any T-SQL error will also
be reported in the same way. The
variables passed by reference for OUTPUT
and RETVAL parameters will be filled
with the right values.

Now, an example:

if we have this procedure:

   @sval varchar(50) OUTPUT,
   @intval int OUTPUT,
   @floatval decimal(6,4) OUTPUT
) AS

if @intval is null
    select '@intval is null' as answer
    select '@intval is NOT null' as answer

set @sval='Hello ' + @sval
set @intval=@intval+1
set @floatval=@floatval+1

return 10

We can use this PHP code:



if (
$conn) {


    print (
"Answer: " . $arr[0] . "<br>" );
    print (
"RETVAL = $val ; intval = $ival ; floatval = $fval ; string = $sval");
else print(

Hope it helps. Good luck!
To Top