PHP Tür Karşılaştırma Tabloları

Aşağıdaki tablolarda PHP türlerinin ve karşılaştırma işleçlerinin gevşek ve titiz karşılaştırmalarda davranışları gösterilmiştir. Bu ek bölüm ayrıca Tür Dönüşümü bölümü ile de ilgilidir. Bu tablolar çeşitli kullanıcı yorumlarından ve » BlueShoes sitesindeki çalışmadan esinlenerek oluşturulmuştur.

Bu tabloları kullanmadan önce türleri ve anlamlarını anlamış olmak önemlidir. Örneğin, "42" değeri string türünde iken 42 değeri int türündedir. false değeri bool türünde olduğu halde "false" değeri string türündedir.

Bilginize:
HTML Formları tamsayı, gerçek sayı ve mantıksal değerleri aktarmaz; sadece dizgeleri aktarır. Bir dizgenin sayısal olup olmadığını öğrenmek için is_numeric() işlevini kullanabilirsiniz.

Bilginize:
$x tanımsızken if ($x) yazılırsa E_NOTICE seviyesinde bir hata üretilir. Bunun olmaması için empty() veya isset() işlevlerini kullanmanız ve/veya değişkenlerinizi ilklendirmeniz gerekir.

Bilginize:
Bazı sayısal işlemler NAN sabiti ile belirtilen bir değer üretebilir. Bu değerin diğer bir değerle (kendisi dahil, true hariç) sıkı veya gevşek karşılaştırmaları false sonucunu verir. (örneğin, NAN != NAN ve NAN !== NAN) NAN üreten işlemlere örnek olarak sqrt(-1), asin(2) ve asinh(0) verilebilir.

**`$x` ile PHP işlevlerinin karşılaştırmaları**
İfade	gettype()	empty()	is_null()	isset()	bool `: if($x)`
`$x = "";`	string	`true`	`false`	`true`	`false`
`$x = null;`	NULL	`true`	`true`	`false`	`false`
`var $x;`	NULL	`true`	`true`	`false`	`false`
`$x` tanımsız	NULL	`true`	`true`	`false`	`false`
`$x = [];`	array	`true`	`false`	`true`	`false`
`$x = ['a', 'b'];`	array	`false`	`false`	`true`	`true`
`$x = false;`	bool	`true`	`false`	`true`	`false`
`$x = true;`	bool	`false`	`false`	`true`	`true`
`$x = 1;`	int	`false`	`false`	`true`	`true`
`$x = 42;`	int	`false`	`false`	`true`	`true`
`$x = 0;`	int	`true`	`false`	`true`	`false`
`$x = -1;`	int	`false`	`false`	`true`	`true`
`$x = "1";`	string	`false`	`false`	`true`	`true`
`$x = "0";`	string	`true`	`false`	`true`	`false`
`$x = "-1";`	string	`false`	`false`	`true`	`true`
`$x = "php";`	string	`false`	`false`	`true`	`true`
`$x = "true";`	string	`false`	`false`	`true`	`true`
`$x = "false";`	string	`false`	`false`	`true`	`true`

**`==` ile gevşek karşılaştırmalar**
	`true`	`false`	`1`	`0`	`-1`	`"1"`	`"0"`	`"-1"`	`null`	`[]`	`"php"`	`""`
`true`	`true`	`false`	`true`	`false`	`true`	`true`	`false`	`true`	`false`	`false`	`true`	`false`
`false`	`false`	`true`	`false`	`true`	`false`	`false`	`true`	`false`	`true`	`true`	`false`	`true`
`1`	`true`	`false`	`true`	`false`	`false`	`true`	`false`	`false`	`false`	`false`	`false`	`false`
`0`	`false`	`true`	`false`	`true`	`false`	`false`	`true`	`false`	`true`	`false`	`false`*	`false`*
`-1`	`true`	`false`	`false`	`false`	`true`	`false`	`false`	`true`	`false`	`false`	`false`	`false`
`"1"`	`true`	`false`	`true`	`false`	`false`	`true`	`false`	`false`	`false`	`false`	`false`	`false`
`"0"`	`false`	`true`	`false`	`true`	`false`	`false`	`true`	`false`	`false`	`false`	`false`	`false`
`"-1"`	`true`	`false`	`false`	`false`	`true`	`false`	`false`	`true`	`false`	`false`	`false`	`false`
`null`	`false`	`true`	`false`	`true`	`false`	`false`	`false`	`false`	`true`	`true`	`false`	`true`
`[]`	`false`	`true`	`false`	`false`	`false`	`false`	`false`	`false`	`true`	`true`	`false`	`false`
`"php"`	`true`	`false`	`false`	`false`*	`false`	`false`	`false`	`false`	`false`	`false`	`true`	`false`
`""`	`false`	`true`	`false`	`false`*	`false`	`false`	`false`	`false`	`true`	`false`	`false`	`true`

* PHP 8.0.0 öncesinde true idi.

**`===` ile titiz karşılaştırmalar**
	`true`	`false`	`1`	`0`	`-1`	`"1"`	`"0"`	`"-1"`	`null`	`[]`	`"php"`	`""`
`true`	`true`	`false`	`false`	`false`	`false`	`false`	`false`	`false`	`false`	`false`	`false`	`false`
`false`	`false`	`true`	`false`	`false`	`false`	`false`	`false`	`false`	`false`	`false`	`false`	`false`
`1`	`false`	`false`	`true`	`false`	`false`	`false`	`false`	`false`	`false`	`false`	`false`	`false`
`0`	`false`	`false`	`false`	`true`	`false`	`false`	`false`	`false`	`false`	`false`	`false`	`false`
`-1`	`false`	`false`	`false`	`false`	`true`	`false`	`false`	`false`	`false`	`false`	`false`	`false`
`"1"`	`false`	`false`	`false`	`false`	`false`	`true`	`false`	`false`	`false`	`false`	`false`	`false`
`"0"`	`false`	`false`	`false`	`false`	`false`	`false`	`true`	`false`	`false`	`false`	`false`	`false`
`"-1"`	`false`	`false`	`false`	`false`	`false`	`false`	`false`	`true`	`false`	`false`	`false`	`false`
`null`	`false`	`false`	`false`	`false`	`false`	`false`	`false`	`false`	`true`	`false`	`false`	`false`
`[]`	`false`	`false`	`false`	`false`	`false`	`false`	`false`	`false`	`false`	`true`	`false`	`false`
`"php"`	`false`	`false`	`false`	`false`	`false`	`false`	`false`	`false`	`false`	`false`	`true`	`false`
`""`	`false`	`false`	`false`	`false`	`false`	`false`	`false`	`false`	`false`	`false`	`false`	`true`

Improve This Page

Learn How To Improve This Page • Submit a Pull Request • Report a Bug

＋add a note

User Contributed Notes 8 notes

down

php at benizi dot com ¶

14 years ago

It's interesting to note that 'empty()' and 'boolean : if($x)'
are paired as logical opposites, as are 'is_null()' and 'isset()'.

down

Jan ¶

18 years ago

Note that php comparison is not transitive:

"php" == 0 => true
0 == null => true
null == "php" => false

down

frank ¶

17 years ago

A comparison table for <=,<,=>,> would be nice...
Following are TRUE (tested PHP4&5):
NULL <= -1
NULL <= 0
NULL <= 1
!(NULL >= -1)
NULL >= 0
!(NULL >= 1)
That was a surprise for me (and it is not like SQL, I would like to have the option to have SQL semantics with NULL...).

down

Jeroen ¶

1 year ago

Be aware of the difference between checking the *value* of an array item, and checking the *existence* of an array item:
<?php
$arr = [ 
  'x' => 0,
  'y' => null,
];

isset($arr['x']); // true, same as isset(0)
isset($arr['y']); // false, same as isset(null)

array_key_exists('y', $arr); // true, though the value is null
array_key_exists('z', $arr); // false

down

edgar at goodforall dot eu ¶

14 years ago

Some function to write out your own comparisson table in tsv format. Can be easily modified to add more testcases and/or binary functions. It will test all comparables against each other with all functions. 

<?php
$funcs = array(
        /* Testing equality */
        'eq' => '==',
        'ne' => '!=',
        'gt' => '>',
        'lt' => '<',
        'ne2' => '<>',
        'lte' => '<=',
        'gte' => '>=',
        /* Testing identity */
        'id' => '===',
        'nid' => '!=='
);
class Test {
        protected $a;
        public $b;
        public function __construct($a,$b){
                $this->a = $a;
                $this->b = $b;
        }
        public function getab(){
                return $this->a.",". $this->b;
        }

}
$tst1 = new Test(1,2);
$tst2 = new Test(1,2);
$tst3 = new Test(2,2);
$tst4 = new Test(1,1);

$arr1 = array(1,2,3);
$arr2 = array(2,3,4);
$arr3 = array('a','b','c','d');
$arr4 = array('a','b','c');
$arr5 = array();

$comp1 = array(
        'ints' => array(-1,0,1,2),
        'floats' => array(-1.1,0.0,1.1,2.0),
        'string' => array('str', 'str1', '', '1'),
        'bools' => array(true, false),
        'null' => array(null),
        'objects' => array($tst1,$tst2,$tst3,$tst4),
        'arrays' => array($arr1, $arr2, $arr3, $arr4, $arr5)
);
$fbody = array();

foreach($funcs as $name => $op){
        $fbody[$name] = create_function('$a,$b', 'return $a ' . $op . ' $b;');
}

$table = array(array('function', 'comp1', 'comp2', 'f comp1 comp2', 'type'));
/* Do comparisons */
$comp2  = array();
foreach($comp1 as $type => $val){
        $comp2[$type] = $val;
}

foreach($comp1 as $key1 => $val1){
        foreach($comp2 as $key2 => $val2){
                addTableEntry($key1, $key2, $val1, $val2);
        }
}
$out = '';
foreach($table as $row){
        $out .= sprintf("%-20s\t%-20s\t%-20s\t%-20s\t%-20s\n", $row[0], $row[1], $row[2], $row[3], $row[4]);
}

print $out;
exit;

function addTableEntry($n1, $n2, $comp1, $comp2){
        global $table, $fbody;
        foreach($fbody as $fname => $func){
                        foreach($comp1 as $val1){
  foreach($comp2 as $val2){
                                        $val = $func($val1,$val2);
                                                $table[] = array($fname, gettype($val1) . ' => ' . sprintval($val1), gettype($val2) .' => ' . sprintval($val2), gettype($val) . ' => ' . sprintval($val), gettype($val1) . "-" . gettype($val2) . '-' . $fname);
                                        }
                        }
        }
}

function sprintval($val){
        if(is_object($val)){
                return 'object-' . $val->getab();
        }
        if(is_array($val)){
                return implode(',', $val);
        }
        if(is_bool($val)){
                if($val){
                        return 'true';
                }
                return 'false';
        }
        return strval($val);
}

?>

down

blue dot hirano at gmail dot com ¶

10 years ago

The truth tables really ought to be colorized; they're very hard to read as they are right now (just big arrays of TRUE and FALSE).

Also, something to consider: clustering the values which compare similarly (like is done on qntm.org/equality) would make the table easier to read as well. (This can be done simply by hand by rearranging the order of headings to bring related values closer together).

down

jerryschwartz at comfortable dot com ¶

19 years ago

In some languages, a boolean is promoted to an integer (with a value of 1 or -1, typically) if used in an expression with an integer. I found that PHP has it both ways:

If you add a boolean with a value of true to an integer with a value of 3, the result will be 4 (because the boolean is cast as an integer).

On the other hand, if you test a boolean with a value of true for equality with an integer with a value of three, the result will be true (because the integer is cast as a boolean).

Surprisingly, at first glance, if you use either < or > as the comparison operator the result is always false (again, because the integer as cast as a boolean, and true is neither greater nor less than true).

down

-1

mark at theanti dot social ¶

6 years ago

There is also 0.0 which is not identical to 0.

  $x = 0.0; 
  gettype($x); // double
  empty($x); // true
  is_null($x); //false
  isset($x); // true
  is_numeric($x); // true
  $x ? true : false; // false
  $x == 0; // true
  $x == "0"; // true
  $x == "0.0"; // true
  $x == false; // true
  $x == null; // true
  $x === 0; // false
  $x === false; // false
  $x === null; // false
  $x === "0"; // false
  $x === "0.0"; // false

＋add a note