异常

目录

PHP 有一个和其他语言相似的异常模型。在 PHP 里可以 throw 并捕获(catch)异常。为了捕获潜在的异常,代码会包含在 try 块里。每个 try 都必须至少有一个相应的 catchfinally 块。

如果抛出异常的函数作用域内没有 catch 块,异常会沿调用栈“向上冒泡”,直到找到匹配的 catch 块。沿途会执行所有遇到的 finally 块。在没有设置全局异常处理程序时,如果调用栈向上都没有遇到匹配的 catch,程序会抛出 fatal 错误并终止。

抛出的对象必须是 instanceof Throwable。尝试抛出其他对象会导致 PHP Fatal 错误。

PHP 8.0.0 起,throw 关键词现在开始是表达式,可用于任何表达式上下文。在此之前,它是语句,必须独占一行。

catch

catch 定义了处理抛出异常的方式。 catch 块定义了它能处理的异常/错误的类型,并可以选择将异常赋值到变量中。 (在 PHP 8.0.0 之前的版本中必须要赋值到变量) 如果遇到抛出对象的类型匹配了首个 catch 块的异常或错误,将会处理该对象。

可用多个 catch 捕获不同的异常类。 正常情况下(try 代码块里没有抛出异常)会在最后一个定义的 catch 后面继续执行。 catch 代码块里也可以 throw 或者重新抛出异常。 不抛出的话,会在触发的 catch 后面继续执行。

当 PHP 抛出一个异常时,将不会执行后续的代码语句,并会尝试查找首个匹配的 catch 代码块。 如果没有用 set_exception_handler() 设置异常处理函数, PHP 会在异常未被捕获时产生 Fatal 级错误,提示 "Uncaught Exception ..." 消息。

从 PHP 7.1.0 起 catch 可以用竖线符(|) 指定多个异常。 如果在不同的类层次结构中,不同异常的异常需要用同样的方式处理,就特别适用这种方式。

从 PHP 8.0.0 起,捕获的异常不再强制要求指定变量名。 catch 代码块会在未指定时继续执行,只是无法访问到抛出的对象。

finally

finally 代码块可以放在 catch 之后,或者直接代替它。 无论是否抛出了异常,在 trycatch 之后、在执行后续代码之前, 放在 finally 里的代码总是会执行。

值得注意的是 finallyreturn 语句之间存在相互影响。 如果在 trycatch 里遇到 return,仍然会执行 finally 里的代码。 而且,遇到 return 语句时,会先执行 finally 再返回结果。 此外,如果 finally 里也包含了 return 语句,将返回 finally 里的值。

全局异常处理程序

当允许异常冒泡到全局作用域时,它可以被全局异常处理器捕获到。 set_exception_handler() 可以设置一个函数,在没有调用其他块时代替 catch。 在本质上,实现的效果等同于整个程序被 try-catch 包裹起来, 而该函数就是 catch

注释

注意:

PHP 内部函数主要使用 错误报告, 只有一些现代 面向对象 的扩展使用异常。 不过,错误很容易用 ErrorException 转化成异常。 然而,这个技术方案仅适用非 Fatal 级的错误。

示例 #1 将错误报告转成异常

<?php
function exceptions_error_handler($severity, $message, $filename, $lineno) {
throw new
ErrorException($message, 0, $severity, $filename, $lineno);
}

set_error_handler('exceptions_error_handler');
?>

小技巧

PHP 标准库(SPL) 提供了大量的 标准内置异常

示例

示例 #2 抛出一个异常

<?php
function inverse($x) {
if (!
$x) {
throw new
Exception('Division by zero.');
}
return
1/$x;
}

try {
echo
inverse(5) . "\n";
echo
inverse(0) . "\n";
} catch (
Exception $e) {
echo
'Caught exception: ', $e->getMessage(), "\n";
}

// 继续执行
echo "Hello World\n";
?>

以上示例会输出:

0.2
Caught exception: Division by zero.
Hello World

示例 #3 带 finally 块的异常处理

<?php
function inverse($x) {
if (!
$x) {
throw new
Exception('Division by zero.');
}
return
1/$x;
}

try {
echo
inverse(5) . "\n";
} catch (
Exception $e) {
echo
'Caught exception: ', $e->getMessage(), "\n";
} finally {
echo
"First finally.\n";
}

try {
echo
inverse(0) . "\n";
} catch (
Exception $e) {
echo
'Caught exception: ', $e->getMessage(), "\n";
} finally {
echo
"Second finally.\n";
}

// 继续执行
echo "Hello World\n";
?>

以上示例会输出:

0.2
First finally.
Caught exception: Division by zero.
Second finally.
Hello World

示例 #4 finallyreturn 相互之间的影响

<?php

function test() {
try {
throw new
Exception('foo');
} catch (
Exception $e) {
return
'catch';
} finally {
return
'finally';
}
}

echo
test();
?>

以上示例会输出:

finally

示例 #5 异常嵌套

<?php

class MyException extends Exception { }

class
Test {
public function
testing() {
try {
try {
throw new
MyException('foo!');
} catch (
MyException $e) {
// 重新 throw
throw $e;
}
} catch (
Exception $e) {
var_dump($e->getMessage());
}
}
}

$foo = new Test;
$foo->testing();

?>

以上示例会输出:

string(4) "foo!"

示例 #6 多个异常的捕获处理

<?php

class MyException extends Exception { }

class
MyOtherException extends Exception { }

class
Test {
public function
testing() {
try {
throw new
MyException();
} catch (
MyException | MyOtherException $e) {
var_dump(get_class($e));
}
}
}

$foo = new Test;
$foo->testing();

?>

以上示例会输出:

string(11) "MyException"

示例 #7 忽略捕获的变量

仅仅在 PHP 8.0.0 及以上版本有效

<?php

function test() {
throw new
SpecificException('Oopsie');
}

try {
test();
} catch (
SpecificException) {
print
"A SpecificException was thrown, but we don't care about the details.";
}
?>

示例 #8 以表达式的形式抛出

仅仅在 PHP 8.0.0 及以上版本有效

<?php

class SpecificException extends Exception {}

function
test() {
do_something_risky() or throw new Exception('It did not work');
}

try {
test();
} catch (
Exception $e) {
print
$e->getMessage();
}
?>
添加备注

用户贡献的备注 13 notes

up
125
ask at nilpo dot com
15 years ago
If you intend on creating a lot of custom exceptions, you may find this code useful. I've created an interface and an abstract exception class that ensures that all parts of the built-in Exception class are preserved in child classes. It also properly pushes all information back to the parent constructor ensuring that nothing is lost. This allows you to quickly create new exceptions on the fly. It also overrides the default __toString method with a more thorough one.

<?php
interface IException
{
/* Protected methods inherited from Exception class */
public function getMessage(); // Exception message
public function getCode(); // User-defined Exception code
public function getFile(); // Source filename
public function getLine(); // Source line
public function getTrace(); // An array of the backtrace()
public function getTraceAsString(); // Formated string of trace

/* Overrideable methods inherited from Exception class */
public function __toString(); // formated string for display
public function __construct($message = null, $code = 0);
}

abstract class
CustomException extends Exception implements IException
{
protected
$message = 'Unknown exception'; // Exception message
private $string; // Unknown
protected $code = 0; // User-defined exception code
protected $file; // Source filename of exception
protected $line; // Source line of exception
private $trace; // Unknown

public function __construct($message = null, $code = 0)
{
if (!
$message) {
throw new
$this('Unknown '. get_class($this));
}
parent::__construct($message, $code);
}

public function
__toString()
{
return
get_class($this) . " '{$this->message}' in {$this->file}({$this->line})\n"
. "{$this->getTraceAsString()}";
}
}
?>

Now you can create new exceptions in one line:

<?php
class TestException extends CustomException {}
?>

Here's a test that shows that all information is properly preserved throughout the backtrace.

<?php
function exceptionTest()
{
try {
throw new
TestException();
}
catch (
TestException $e) {
echo
"Caught TestException ('{$e->getMessage()}')\n{$e}\n";
}
catch (
Exception $e) {
echo
"Caught Exception ('{$e->getMessage()}')\n{$e}\n";
}
}

echo
'<pre>' . exceptionTest() . '</pre>';
?>

Here's a sample output:

Caught TestException ('Unknown TestException')
TestException 'Unknown TestException' in C:\xampp\htdocs\CustomException\CustomException.php(31)
#0 C:\xampp\htdocs\CustomException\ExceptionTest.php(19): CustomException->__construct()
#1 C:\xampp\htdocs\CustomException\ExceptionTest.php(43): exceptionTest()
#2 {main}
up
12
tianyiw at vip dot qq dot com
1 year ago
Easy to understand `finally`.
<?php
try {
try {
echo
"before\n";
1 / 0;
echo
"after\n";
} finally {
echo
"finally\n";
}
} catch (
\Throwable) {
echo
"exception\n";
}
?>
# Print:
before
finally
exception
up
80
Johan
13 years ago
Custom error handling on entire pages can avoid half rendered pages for the users:

<?php
ob_start
();
try {
/*contains all page logic
and throws error if needed*/
...
} catch (
Exception $e) {
ob_end_clean();
displayErrorPage($e->getMessage());
}
?>
up
6
jlherren
9 months ago
As noted elsewhere, throwing an exception from the `finally` block will replace a previously thrown exception. But the original exception is magically available from the new exception's `getPrevious()`.

<?php
try {
try {
throw new
RuntimeException('Exception A');
} finally {
throw new
RuntimeException('Exception B');
}
}
catch (
Throwable $exception) {
echo
$exception->getMessage(), "\n";
// 'previous' is magically available!
echo $exception->getPrevious()->getMessage(), "\n";
}
?>

Will print:

Exception B
Exception A
up
24
Shot (Piotr Szotkowski)
16 years ago
‘Normal execution (when no exception is thrown within the try block, *or when a catch matching the thrown exception’s class is not present*) will continue after that last catch block defined in sequence.’

‘If an exception is not caught, a PHP Fatal Error will be issued with an “Uncaught Exception …” message, unless a handler has been defined with set_exception_handler().’

These two sentences seem a bit contradicting about what happens ‘when a catch matching the thrown exception’s class is not present’ (and the second sentence is actually correct).
up
15
christof+php[AT]insypro.com
7 years ago
In case your E_WARNING type of errors aren't catchable with try/catch you can change them to another type of error like this:

<?php
set_error_handler
(function($errno, $errstr, $errfile, $errline){
if(
$errno === E_WARNING){
// make it more serious than a warning so it can be caught
trigger_error($errstr, E_ERROR);
return
true;
} else {
// fallback to default php error handler
return false;
}
});

try {
// code that might result in a E_WARNING
} catch(Exception $e){
// code to handle the E_WARNING (it's actually changed to E_ERROR at this point)
} finally {
restore_error_handler();
}
?>
up
15
daviddlowe dot flimm at gmail dot com
7 years ago
Starting in PHP 7, the classes Exception and Error both implement the Throwable interface. This means, if you want to catch both Error instances and Exception instances, you should catch Throwable objects, like this:

<?php

try {
throw new
Error( "foobar" );
// or:
// throw new Exception( "foobar" );
}
catch (
Throwable $e) {
var_export( $e );
}

?>
up
25
Edu
11 years ago
The "finally" block can change the exception that has been throw by the catch block.

<?php
try{
try {
throw new
\Exception("Hello");
} catch(
\Exception $e) {
echo
$e->getMessage()." catch in\n";
throw
$e;
} finally {
echo
$e->getMessage()." finally \n";
throw new
\Exception("Bye");
}
} catch (
\Exception $e) {
echo
$e->getMessage()." catch out\n";
}
?>

The output is:

Hello catch in
Hello finally
Bye catch out
up
15
Simo
9 years ago
#3 is not a good example. inverse("0a") would not be caught since (bool) "0a" returns true, yet 1/"0a" casts the string to integer zero and attempts to perform the calculation.
up
16
telefoontoestel at nospam dot org
10 years ago
When using finally keep in mind that when a exit/die statement is used in the catch block it will NOT go through the finally block.

<?php
try {
echo
"try block<br />";
throw new
Exception("test");
} catch (
Exception $ex) {
echo
"catch block<br />";
} finally {
echo
"finally block<br />";
}

// try block
// catch block
// finally block
?>

<?php
try {
echo
"try block<br />";
throw new
Exception("test");
} catch (
Exception $ex) {
echo
"catch block<br />";
exit(
1);
} finally {
echo
"finally block<br />";
}

// try block
// catch block
?>
up
11
mlaopane at gmail dot com
6 years ago
<?php

/**
* You can catch exceptions thrown in a deep level function
*/

function employee()
{
throw new
\Exception("I am just an employee !");
}

function
manager()
{
employee();
}

function
boss()
{
try {
manager();
} catch (
\Exception $e) {
echo
$e->getMessage();
}
}

boss(); // output: "I am just an employee !"
up
8
Tom Polomsk
9 years ago
Contrary to the documentation it is possible in PHP 5.5 and higher use only try-finally blocks without any catch block.
up
8
Sawsan
12 years ago
the following is an example of a re-thrown exception and the using of getPrevious function:

<?php

$name
= "Name";

//check if the name contains only letters, and does not contain the word name

try
{
try
{
if (
preg_match('/[^a-z]/i', $name))
{
throw new
Exception("$name contains character other than a-z A-Z");
}
if(
strpos(strtolower($name), 'name') !== FALSE)
{
throw new
Exception("$name contains the word name");
}
echo
"The Name is valid";
}
catch(
Exception $e)
{
throw new
Exception("insert name again",0,$e);
}
}

catch (
Exception $e)
{
if (
$e->getPrevious())
{
echo
"The Previous Exception is: ".$e->getPrevious()->getMessage()."<br/>";
}
echo
"The Exception is: ".$e->getMessage()."<br/>";
}

?>
To Top