$_SERVER

(PHP 4 >= 4.1.0, PHP 5, PHP 7, PHP 8)

$_SERVER — Server and execution environment information

Description

$_SERVER is an array containing information such as headers, paths, and script locations. The entries in this array are created by the web server, therefore there is no guarantee that every web server will provide any of these; servers may omit some, or provide others not listed here. However, most of these variables are accounted for in the » CGI/1.1 specification, and are likely to be defined.

Note: When running PHP on the command line most of these entries will not be available or have any meaning.

In addition to the elements listed below, PHP will create additional elements with values from request headers. These entries will be named HTTP_ followed by the header name, capitalized and with underscores instead of hyphens. For example, the Accept-Language header would be available as $_SERVER['HTTP_ACCEPT_LANGUAGE'].

Indices

'PHP_SELF'

The filename of the currently executing script, relative to the document root. For instance, $_SERVER['PHP_SELF'] in a script at the address http://example.com/foo/bar.php would be /foo/bar.php. The __FILE__ constant contains the full path and filename of the current (i.e. included) file. If PHP is running as a command-line processor this variable contains the script name.

'argv'

Array of arguments passed to the script. When the script is run on the command line, this gives C-style access to the command line parameters. When called via the GET method, this will contain the query string.

'argc'

Contains the number of command line parameters passed to the script (if run on the command line).

'GATEWAY_INTERFACE'

What revision of the CGI specification the server is using; e.g. 'CGI/1.1'.

'SERVER_ADDR'

The IP address of the server under which the current script is executing.

'SERVER_NAME'

The name of the server host under which the current script is executing. If the script is running on a virtual host, this will be the value defined for that virtual host.

Note: Under Apache 2, UseCanonicalName = On and ServerName must be set. Otherwise, this value reflects the hostname supplied by the client, which can be spoofed. It is not safe to rely on this value in security-dependent contexts.

'SERVER_SOFTWARE'

Server identification string, given in the headers when responding to requests.

'SERVER_PROTOCOL'

Name and revision of the information protocol via which the page was requested; e.g. 'HTTP/1.0';

'REQUEST_METHOD'

Which request method was used to access the page; e.g. 'GET', 'HEAD', 'POST', 'PUT'.

Note:
PHP script is terminated after sending headers (it means after producing any output without output buffering) if the request method was HEAD.

'REQUEST_TIME'

The timestamp of the start of the request.

'REQUEST_TIME_FLOAT'

The timestamp of the start of the request, with microsecond precision.

'QUERY_STRING'

The query string, if any, via which the page was accessed.

'DOCUMENT_ROOT'

The document root directory under which the current script is executing, as defined in the server's configuration file.

'HTTPS'

Set to a non-empty value if the script was queried through the HTTPS protocol.

'REMOTE_ADDR'

The IP address from which the user is viewing the current page.

'REMOTE_HOST'

The Host name from which the user is viewing the current page. The reverse dns lookup is based on the REMOTE_ADDR of the user.

Note: The web server must be configured to create this variable. For example in Apache HostnameLookups On must be set inside httpd.conf for it to exist. See also gethostbyaddr().

'REMOTE_PORT'

The port being used on the user's machine to communicate with the web server.

'REMOTE_USER'

The authenticated user.

'REDIRECT_REMOTE_USER'

The authenticated user if the request is internally redirected.

'SCRIPT_FILENAME'

The absolute pathname of the currently executing script.

Note:
If a script is executed with the CLI, as a relative path, such as file.php or ../file.php, $_SERVER['SCRIPT_FILENAME'] will contain the relative path specified by the user.

'SERVER_ADMIN'

The value given to the SERVER_ADMIN (for Apache) directive in the web server configuration file. If the script is running on a virtual host, this will be the value defined for that virtual host.

'SERVER_PORT'

The port on the server machine being used by the web server for communication. For default setups, this will be '80'; using SSL, for instance, will change this to whatever your defined secure HTTP port is.

Note: Under Apache 2, UseCanonicalName = On, as well as UseCanonicalPhysicalPort = On must be set in order to get the physical (real) port, otherwise, this value can be spoofed, and it may or may not return the physical port value. It is not safe to rely on this value in security-dependent contexts.

'SERVER_SIGNATURE'

String containing the server version and virtual host name which are added to server-generated pages, if enabled.

'PATH_TRANSLATED'

Filesystem- (not document root-) based path to the current script, after the server has done any virtual-to-real mapping.

Note: Apache 2 users may use AcceptPathInfo = On inside httpd.conf to define PATH_INFO.

'SCRIPT_NAME'

Contains the current script's path. This is useful for pages which need to point to themselves. The __FILE__ constant contains the full path and filename of the current (i.e. included) file.

'REQUEST_URI'

The URI which was given in order to access this page; for instance, '/index.html'.

'PHP_AUTH_DIGEST'

When doing Digest HTTP authentication this variable is set to the 'Authorization' header sent by the client (which you should then use to make the appropriate validation).

'PHP_AUTH_USER'

When doing HTTP authentication this variable is set to the username provided by the user.

'PHP_AUTH_PW'

When doing HTTP authentication this variable is set to the password provided by the user.

'AUTH_TYPE'

When doing HTTP authentication this variable is set to the authentication type.

'PATH_INFO'

Contains any client-provided pathname information trailing the actual script filename but preceding the query string, if available. For instance, if the current script was accessed via the URI http://www.example.com/php/path_info.php/some/stuff?foo=bar, then $_SERVER['PATH_INFO'] would contain /some/stuff.

'ORIG_PATH_INFO'

Original version of 'PATH_INFO' before processed by PHP.

Examples

Example #1 $_SERVER example

<?php
echo $_SERVER['SERVER_NAME'];
?>

The above example will output something similar to:

www.example.com

Notes

Note:
This is a 'superglobal', or automatic global, variable. This simply means that it is available in all scopes throughout a script. There is no need to do global $variable; to access it within functions or methods.

Found A Problem?

Learn How To Improve This Page • Submit a Pull Request • Report a Bug

＋add a note

User Contributed Notes 38 notes

down

154

Vladimir Kornea ¶

15 years ago

1. All elements of the $_SERVER array whose keys begin with 'HTTP_' come from HTTP request headers and are not to be trusted.

2. All HTTP headers sent to the script are made available through the $_SERVER array, with names prefixed by 'HTTP_'.

3. $_SERVER['PHP_SELF'] is dangerous if misused. If login.php/nearly_arbitrary_string is requested, $_SERVER['PHP_SELF'] will contain not just login.php, but the entire login.php/nearly_arbitrary_string. If you've printed $_SERVER['PHP_SELF'] as the value of the action attribute of your form tag without performing HTML encoding, an attacker can perform XSS attacks by offering users a link to your site such as this:

<a href='http://www.example.com/login.php/"><script type="text/javascript">...</script><span a="'>Example.com</a>

The javascript block would define an event handler function and bind it to the form's submit event. This event handler would load via an <img> tag an external file, with the submitted username and password as parameters.

Use $_SERVER['SCRIPT_NAME'] instead of $_SERVER['PHP_SELF']. HTML encode every string sent to the browser that should not be interpreted as HTML, unless you are absolutely certain that it cannot contain anything that the browser can interpret as HTML.

down

vcoletti at tiscali dot it ¶

4 years ago

To list all the $_SERVER parameters, simply do:

foreach ($_SERVER as $parm => $value)  echo "$parm = '$value'\n";

No need to list all possible keys of the array.

down

MarkAgius at markagius dot co dot uk ¶

13 years ago

You have missed 'REDIRECT_STATUS'

Very useful if you point all your error pages to the same file.

File; .htaccess
# .htaccess file.

ErrorDocument 404 /error-msg.php
ErrorDocument 500 /error-msg.php
ErrorDocument 400 /error-msg.php
ErrorDocument 401 /error-msg.php
ErrorDocument 403 /error-msg.php
# End of file.

File; error-msg.php
<?php
  $HttpStatus = $_SERVER["REDIRECT_STATUS"] ;
  if($HttpStatus==200) {print "Document has been processed and sent to you.";}
  if($HttpStatus==400) {print "Bad HTTP request ";}
  if($HttpStatus==401) {print "Unauthorized - Iinvalid password";}
  if($HttpStatus==403) {print "Forbidden";}
  if($HttpStatus==500) {print "Internal Server Error";}
  if($HttpStatus==418) {print "I'm a teapot! - This is a real value, defined in 1998";}

?>

down

Lord Mac ¶

15 years ago

An even *more* improved version...

<?php
phpinfo(32);
?>

down

jonbarnett at gmail dot com ¶

16 years ago

It's worth noting that $_SERVER variables get created for any HTTP request headers, including those you might invent:

If the browser sends an HTTP request header of:
X-Debug-Custom: some string

Then:

<?php
$_SERVER['HTTP_X_DEBUG_CUSTOM']; // "some string"
?>

There are better ways to identify the HTTP request headers sent by the browser, but this is convenient if you know what to expect from, for example, an AJAX script with custom headers.

Works in PHP5 on Apache with mod_php.  Don't know if this is true from other environments.

down

pierstoval at example dot com ¶

7 years ago

As PHP $_SERVER var is populated with a lot of vars, I think it's important to say that it's also populated with environment vars.

For example, with a PHP script, we can have this:

    MY_ENV_VAR=Hello php -r 'echo $_SERVER["MY_ENV_VAR"];'
    
Will show "Hello".

But, internally, PHP makes sure that "internal" keys in $_SERVER are not overriden, so you wouldn't be able to do something like this:

    REQUEST_TIME=Hello php -r 'var_dump($_SERVER["REQUEST_TIME"]);'
    
Will show something like 1492897785

However, a lot of vars are still vulnerable from environment injection.

I created a gist here ( https://gist.github.com/Pierstoval/f287d3e61252e791a943dd73874ab5ee ) with my PHP configuration on windows with PHP7.0.15 on WSL with bash, the results are that the only "safe" vars are the following:

PHP_SELF
SCRIPT_NAME
SCRIPT_FILENAME
PATH_TRANSLATED
DOCUMENT_ROOT
REQUEST_TIME_FLOAT
REQUEST_TIME
argv
argc

All the rest can be overriden with environment vars, which is not very cool actually because it can break PHP applications sometimes...

(and I only tested on CLI, I had no patience to test with Apache mod_php or Nginx + PHP-FPM, but I can imagine that not a lot of $_SERVER properties are "that" secure...)

down

chris at ocproducts dot com ¶

7 years ago

Guide to absolute paths...

Data: __FILE__
Data type: String
Purpose: The absolute pathname of the running PHP file, including the filename.
Caveat: This is not the file called by the PHP processor, it's what is running. So if you are inside an include, it's the include.
Caveat: Symbolic links are pre-resolved, so don't trust comparison of paths to be accurate.
Caveat: Don't assume all operating systems use '/' for the directory separator.
Works on web mode: Yes
Works on CLI mode: Yes

Data: __DIR__
Data type: String
Purpose: The absolute pathname to the running PHP file, excluding the filename
Caveat: This is not the file called by the PHP processor, it's what is running. So if you are inside an include, it's the include.
Caveat: Symbolic links are pre-resolved, so don't trust comparison of paths to be accurate.
Caveat: Don't assume all operating systems use '/' for the directory separator.
Works on web mode: Yes
Works on CLI mode: Yes

Data: $_SERVER['SCRIPT_FILENAME']
Data type: String
Purpose: The absolute pathname of the origin PHP file, including the filename
Caveat: Not set on all PHP environments, may need setting by copying from __FILE__ before other files are included.
Caveat: Symbolic links are not pre-resolved, use PHP's 'realpath' function if you need it resolved.
Caveat: Don't assume all operating systems use '/' for the directory separator.
Caveat: "Filename" makes you think it is just a filename, but it really is the full absolute pathname. Read the identifier as "Script's filesystem (path)name".
Works on web mode: Yes
Works on CLI mode: Yes

Data: $_SERVER['PATH_TRANSLATED']
Data type: String
Purpose: The absolute pathname of the origin PHP file, including the filename
Caveat: It's probably not set, best to just not use it. Just use realpath($_SERVER['SCRIPT_FILENAME']) (and be aware that itself may need to have been emulated).
Caveat: Symbolic links are pre-resolved, so don't trust comparison of paths to be accurate.
Caveat: Don't assume all operating systems use '/' for the directory separator.
Works on web mode: Yes
Works on CLI mode: No

Data: $_SERVER['DOCUMENT_ROOT']
Data type: String
Purpose: Get the absolute path to the web server's document root. No trailing slash.
Caveat: Don't trust this to be set, or set correctly, unless you control the server environment.
Caveat: May or may not have symbolic links pre-resolved, use PHP's 'realpath' function if you need it resolved.
Caveat: Don't assume all operating systems use '/' for the directory separator.
Works on web mode: Yes
Works on CLI mode: No

Note that if something is not set it may be missing from $_SERVER, or it may be blank, so use PHP's 'empty' function for your test.

Note that if you call "php --info" on the command line then naturally some of these settings are going to be blank, as no PHP file is involved.

down

Richard York ¶

15 years ago

Not documented here is the fact that $_SERVER is populated with some pretty useful information when accessing PHP via the shell.

 ["_SERVER"]=>
  array(24) {
    ["MANPATH"]=>
    string(48) "/usr/share/man:/usr/local/share/man:/usr/X11/man"
    ["TERM"]=>
    string(11) "xterm-color"
    ["SHELL"]=>
    string(9) "/bin/bash"
    ["SSH_CLIENT"]=>
    string(20) "127.0.0.1 41242 22"
    ["OLDPWD"]=>
    string(60) "/Library/WebServer/Domains/www.example.com/private"
    ["SSH_TTY"]=>
    string(12) "/dev/ttys000"
    ["USER"]=>
    string(5) "username"
    ["MAIL"]=>
    string(15) "/var/mail/username"
    ["PATH"]=>
    string(57) "/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin"
    ["PWD"]=>
    string(56) "/Library/WebServer/Domains/www.example.com/www"
    ["SHLVL"]=>
    string(1) "1"
    ["HOME"]=>
    string(12) "/Users/username"
    ["LOGNAME"]=>
    string(5) "username"
    ["SSH_CONNECTION"]=>
    string(31) "127.0.0.1 41242 10.0.0.1 22"
    ["_"]=>
    string(12) "/usr/bin/php"
    ["__CF_USER_TEXT_ENCODING"]=>
    string(9) "0x1F5:0:0"
    ["PHP_SELF"]=>
    string(10) "Shell.php"
    ["SCRIPT_NAME"]=>
    string(10) "Shell.php"
    ["SCRIPT_FILENAME"]=>
    string(10) "Shell.php"
    ["PATH_TRANSLATED"]=>
    string(10) "Shell.php"
    ["DOCUMENT_ROOT"]=>
    string(0) ""
    ["REQUEST_TIME"]=>
    int(1247162183)
    ["argv"]=>
    array(1) {
      [0]=>
      string(10) "Shell.php"
    }
    ["argc"]=>
    int(1)
  }

down

ywarnier at beeznest dot org ¶

7 years ago

Note that $_SERVER['REQUEST_URI'] might include the scheme and domain in certain cases.

This happens, for example, when calling the page through a call to stream_context_create() with a HTTP header of 'request_fulluri' set to 1.

For example:

$http = ['request_fulluri' => 1, /* other params here */];
$context = stream_context_create(array( 'http' => $http ));
$fp = fopen($some_url, 'rb', false, $context);

When outputting $_SERVER['REQUEST_URI'] on the server at $some_url, you will get
https://some_url/some_script.php

Remove the request_fulluri => 1 option, and $_SERVER['REQUEST_URI'] gets back to its "normal":
/some_script.php

Apparently, request_fulluri is useful when using some proxy servers.

In this case, there is no proper way to "detect" if this option was set or not, and you should probably use a combination of other $_SERVER[] elements (like REQUEST_SCHEME, SERVER_NAME and SERVER_PORT) to determine if this was the case.

One quick (and improvable) way to detect it would be to compare the start of the REQUEST_URI with REQUEST_SCHEME:

$scheme = $_SERVER['REQUEST_SCHEME'] . '://';
if (strcmp(substr($_SERVER['REQUEST_URI'], 0, strlen($scheme)), $scheme) === 0) {
    // request_fulluri was set
}

down

chris at ocproducts dot com ¶

7 years ago

Guide to URL paths...

Data: $_SERVER['PHP_SELF']
Data type: String
Purpose: The URL path name of the current PHP file, including path-info (see $_SERVER['PATH_INFO']) and excluding URL query string. Includes leading slash.
Caveat: This is after URL rewrites (i.e. it's as seen by PHP, not necessarily the original call URL).
Works on web mode: Yes
Works on CLI mode: Tenuous (emulated to contain just the exact call path of the CLI script, with whatever exotic relative pathname you may call with, not made absolute and not normalised or pre-resolved)

Data: $_SERVER['SCRIPT_NAME']
Data type: String
Purpose: The URL path name of the current PHP file, excluding path-info and excluding URL query string. Includes leading slash.
Caveat: This is after URL rewrites (i.e. it's as seen by PHP, not necessarily the original call URL).
Caveat: Not set on all PHP environments, may need setting via preg_replace('#\.php/.*#', '.php', $_SERVER['PHP_SELF']).
Works on web mode: Yes
Works on CLI mode: Tenuous (emulated to contain just the exact call path of the CLI script, with whatever exotic relative pathname you may call with, not made absolute and not normalised or pre-resolved)

Data: $_SERVER['REDIRECT_URL']
Data type: String
Purpose: The URL path name of the current PHP file, path-info is N/A and excluding URL query string. Includes leading slash.
Caveat: This is before URL rewrites (i.e. it's as per the original call URL).
Caveat: Not set on all PHP environments, and definitely only ones with URL rewrites.
Works on web mode: Yes
Works on CLI mode: No

Data: $_SERVER['REQUEST_URI']
Data type: String
Purpose: The URL path name of the current PHP file, including path-info and including URL query string. Includes leading slash.
Caveat: This is before URL rewrites (i.e. it's as per the original call URL). *
*: I've seen at least one situation where this is not true (there was another $_SERVER variable to use instead supplied by the URL rewriter), but the author of the URL rewriter later fixed it so probably fair to dismiss this particular note.
Caveat: Not set on all PHP environments, may need setting via $_SERVER['REDIRECT_URL'] . '?' . http_build_query($_GET) [if $_SERVER['REDIRECT_URL'] is set, and imperfect as we don't know what GET parameters were originally passed vs which were injected in the URL rewrite] --otherwise-- $_SERVER['PHP_SELF'] . '?' . http_build_query($_GET).
Works on web mode: Yes
Works on CLI mode: No

Data: $_SERVER['PATH_INFO']
Data type: String
Purpose: Find the path-info, which is data after the .php filename in the URL call. It's a strange concept.
Caveat: Some environments may not support it, it is best avoided unless you have complete server control
Works on web mode: Yes
Works on CLI mode: No

Note that if something is not set it may be missing from $_SERVER, or it may be blank, so use PHP's 'empty' function for your test.

down

krinklemail at gmail dot com ¶

11 years ago

If requests to your PHP script send a header "Content-Type" or/ "Content-Length" it will, contrary to regular HTTP headers, not appear in $_SERVER as $_SERVER['HTTP_CONTENT_TYPE']. PHP removes these (per CGI/1.1 specification[1]) from the HTTP_ match group.

They are still accessible, but only if the request was a POST request. When it is, it'll be available as:
$_SERVER['CONTENT_LENGTH']
$_SERVER['CONTENT_TYPE']

[1] https://www.ietf.org/rfc/rfc3875

down

lemonostif at gmail dot com ¶

5 years ago

PHP_SELF is a disgrace of a programmer's work. One of the most widespread PHP vulnerabilities since version 4 and the manual says nothing about the dangers. At least clarify that ITS VALUE CAN BE PROVIDED BY THE USER with capitals preferably if you want to make the internet a safer place...

down

Tonin ¶

16 years ago

When using the $_SERVER['SERVER_NAME'] variable in an apache virtual host setup with a ServerAlias directive, be sure to check the UseCanonicalName apache directive.  If it is On, this variable will always have the apache ServerName value.  If it is Off, it will have the value given by the headers sent by the browser.

Depending on what you want to do the content of this variable, put in On or Off.

down

info at mtprod dot com ¶

15 years ago

On Windows IIS 7 you must use $_SERVER['LOCAL_ADDR'] rather than $_SERVER['SERVER_ADDR'] to get the server's IP address.

down

jarrod at squarecrow dot com ¶

15 years ago

$_SERVER['DOCUMENT_ROOT'] is incredibly useful especially when working in your development environment. If you're working on large projects you'll likely be including a large number of files into your pages. For example:



<?php

//Defines constants to use for "include" URLS - helps keep our paths clean



        define("REGISTRY_CLASSES",  $_SERVER['DOCUMENT_ROOT']."/SOAP/classes/");

        define("REGISTRY_CONTROLS", $_SERVER['DOCUMENT_ROOT']."/SOAP/controls/");



        define("STRING_BUILDER",     REGISTRY_CLASSES. "stringbuilder.php");

        define("SESSION_MANAGER",     REGISTRY_CLASSES. "sessionmanager.php");

        define("STANDARD_CONTROLS",    REGISTRY_CONTROLS."standardcontrols.php");

?>



In development environments, you're rarely working with your root folder, especially if you're running PHP locally on your box and using DOCUMENT_ROOT is a great way to maintain URL conformity. This will save you hours of work preparing your application for deployment from your box to a production server (not to mention save you the headache of include path failures).

down

Stefano (info at sarchittu dot org) ¶

14 years ago

A way to get the absolute path of your page, independent from the site position (so works both on local machine and on server without setting anything) and from the server OS (works both on Unix systems and Windows systems).

The only parameter it requires is the folder in which you place this script
So, for istance, I'll place this into my SCRIPT folder, and I'll write SCRIPT word length in $conflen

<?php
$conflen=strlen('SCRIPT');
$B=substr(__FILE__,0,strrpos(__FILE__,'/'));
$A=substr($_SERVER['DOCUMENT_ROOT'], strrpos($_SERVER['DOCUMENT_ROOT'], $_SERVER['PHP_SELF']));
$C=substr($B,strlen($A));
$posconf=strlen($C)-$conflen-1;
$D=substr($C,1,$posconf);
$host='http://'.$_SERVER['SERVER_NAME'].'/'.$D;
?>

$host will finally contain the absolute path.

down

Mark Simon ¶

5 years ago

So near, and yet so far …

$_SERVER has nearly everything you need to know about the current web page environment. Something which would have been handy is easy access to the protocol and the actual web root.

For the protocol, you may or may not have $_SERVER['HTTPS'] and it may or may not be empty. For the web root, $_SERVER['DOCUMENT_ROOT'] depends on the server configuration, and doesn’t work for virtual hosts.

For practical purposes, I normally include something like the following in my scripts:

<?php
    //    Web Root
    //    Usage: include("$root/includes/something.inc.php");
        $root = $_SERVER['WEB_ROOT'] = str_replace($_SERVER['SCRIPT_NAME'],'',$_SERVER['SCRIPT_FILENAME']);

    //    Host & Protocol
    //    Usage: $url = "$protocol://$host/images/something.jpg";
        $host = $_SERVER['HTTP_HOST'];
        $protocol=$_SERVER['PROTOCOL'] = isset($_SERVER['HTTPS']) && !empty($_SERVER['HTTPS']) ? 'https' : 'http';
?>

down

steve at sc-fa dot com ¶

15 years ago

If you are serving from behind a proxy server, you will almost certainly save time by looking at what these $_SERVER variables do on your machine behind the proxy.   

$_SERVER['HTTP_X_FORWARDED_FOR'] in place of $_SERVER['REMOTE_ADDR']

$_SERVER['HTTP_X_FORWARDED_HOST'] and 
$_SERVER['HTTP_X_FORWARDED_SERVER'] in place of (at least in our case,) $_SERVER['SERVER_NAME']

down

kamil00110 ¶

1 year ago

This code can be used to help find somone that tries to dig throught the server files to find something.

.htaccess

ErrorDocument 404 /your.php
ErrorDocument 403 /your.php

<?php  
         //get time
         $time = date("H:i:s d.m.y"); 
         //get user address
         $usr = $_SERVER['REMOTE_ADDR'];    
         //get entered url of the "visitor"
         $url = $_SERVER['REQUEST_URI'];
         //get your servers address
         $ip = $_SERVER['SERVER_ADDR'];
     //put toogether
         $sus = "[".$time."]   ".$usr."   ".$ip.$url.PHP_EOL;    
         //write an log file     
         file_put_contents("susip.txt", $sus, FILE_APPEND);
?>

down

Daniels118 ¶

2 years ago

If you need to know the protocol (http or https) used by the client, then the $_SERVER['HTTPS'] variable may not actually report the truth if your server is behind a proxy or a load balancer (In fact the client could connect to the load balancer using https, and then the load balancer forward the request to the server using http).
If the proxy/load balancer is correctly configured it could send the original request protocol in a header, and you will find it in the $_SERVER[HTTP_X_FORWARDED_PROTO] variable.

down

pomat at live dot it ¶

11 years ago

$_SERVER['DOCUMENT_ROOT'] may contain backslashes on windows systems, and of course it may or may not have a trailing slash (backslash).
I saw the following as an example of the proper way we're supposed to deal with this issue:

<?php
include(dirname($_SERVER['DOCUMENT_ROOT']) . DIRECTORY_SEPARATOR . 'file.php');
?>

Ok, the latter may be used to access a file inside the parent directory of the document root, but actually does not properly address the issue.
In the end, don't warry about. It should be safe to use forward slashes and append a trailing slash in all cases.
Let's say we have this:

<?php
$path = 'subdir/file.php';
$result = $_SERVER['DOCUMENT_ROOT'] . '/' . $path;
?>

On linux $result might be something like
1) "/var/www/subdir/file.php"
2) "/var/www//subdir/file.php"
String 2 is parsed the same as string 1 (have a try with command 'cd').

On windows $result might be something like
1) "C:/apache/htdocs/subdir/file.php"
2) "C:/apache/htdocs//subdir/file.php"
3) "C:\apache\htdocs/subdir/file.php"
4) "C:\apache\htdocs\/subdir/file.php"
All those strings are parsed as "C:\apache\htdocs\subdir\file.php" (have a try with 'cd').

down

lilJoshu ¶

6 years ago

Remember,

Although $_SERVER["REQUEST_METHOD"] is initially built with GET, POST, PUT, HEAD in mind, a server can allow more. 

This may be important if you're building a RESTful interfaces that will also use methods such as PATCH and DELETE.

Also important as a security risk as a possible point of injection. In the event of building something acting based on REQUEST_METHOD, it's recommended to put it in a switch statement.

<?php
switch ($_SERVER["REQUEST_METHOD"]){
   case "PUT":
       foo_replace_data();
       break;
   case "POST":
       foo_add_data();
       break;
   case "HEAD";
       foo_set_that_cookie();
       break;
   case "GET":
   default:
      foo_fetch_stuff()
      break;
}

?>

down

Tom ¶

12 years ago

Be warned that most contents of the Server-Array (even $_SERVER['SERVER_NAME']) are provided by the client and can be manipulated. They can also be used for injections and thus MUST be checked and treated like any other user input.

down

chris ¶

15 years ago

A table of everything in the $_SERVER array can be found near the bottom of the output of phpinfo();

down

pudding06 at gmail dot com ¶

15 years ago

Here's a simple, quick but effective way to block unwanted external visitors to your local server:



<?php

// only local requests

if ($_SERVER['REMOTE_ADDR'] !== '127.0.0.1') die(header("Location: /"));

?>



This will direct all external traffic to your home page. Of course you could send a 404 or other custom error. Best practice is not to stay on the page with a custom error message as you acknowledge that the page does exist. That's why I redirect unwanted calls to (for example) phpmyadmin.

down

picov at e-link dot it ¶

13 years ago

A simple function to detect if the current page address was rewritten by mod_rewrite:



<?php

public function urlWasRewritten() {

  $realScriptName=$_SERVER['SCRIPT_NAME'];

  $virtualScriptName=reset(explode("?", $_SERVER['REQUEST_URI']));

  return !($realScriptName==$virtualScriptName);

}

?>

down

silverquick at gmail dot com ¶

16 years ago

I think the HTTPS element will only be present under Apache 2.x. It's not in the list of "special" variables here:
http://httpd.apache.org/docs/1.3/mod/mod_rewrite.html#RewriteCond
But it is here:
http://httpd.apache.org/docs/2.0/mod/mod_rewrite.html#rewritecond

down

centurianii at yahoo dot co dot uk ¶

7 years ago

If you apply redirection in ALL your requests using commands at the Apache virtual host file like:
RewriteEngine On
RewriteCond "%{REQUEST_URI}" "!=/index.php"
RewriteRule "^/(.*)$" "index.php?$1" [NC,NE,L,QSA]
you should expect some deviations in your $_SERVER global.

Say, you send a url of: [hostname here]/a/b?x=1&y=2
which makes Apache to modify to: /index.php?/a/b?x=1&y=2

Now your $_SERVER global contains among others:
'REQUEST_URI' => '/a/b?x=1&y=2', it retains the initial url after the host
 'QUERY_STRING' => 'a/b&x=1&y=2', notice how php replaces '?' with '&'
 'SCRIPT_NAME' => '/index.php', as it was intended to be.

To test your $_SERVER global:
function serverArray(){
   $arr = array();
   foreach($_SERVER as $key=>$value)
      $arr[] = '&nbsp;&nbsp;&nbsp;\'' . $key . '\' => \'' . (isset($value)? $value : '-') . '\'';
   return @\sort($arr)? '$_SERVER = array(<br />' . implode($arr, ',<br />') . '<br />);' : false;
}
echo serverArray();

down

mirko dot steiner at slashdevslashnull dot de ¶

15 years ago

<?php

// RFC 2616 compatible Accept Language Parser
// http://www.ietf.org/rfc/rfc2616.txt, 14.4 Accept-Language, Page 104
// Hypertext Transfer Protocol -- HTTP/1.1

foreach (explode(',', $_SERVER['HTTP_ACCEPT_LANGUAGE']) as $lang) {
    $pattern = '/^(?P<primarytag>[a-zA-Z]{2,8})'.
    '(?:-(?P<subtag>[a-zA-Z]{2,8}))?(?:(?:;q=)'.
    '(?P<quantifier>\d\.\d))?$/';

    $splits = array();

    printf("Lang:,,%s''\n", $lang);
    if (preg_match($pattern, $lang, $splits)) {
        print_r($splits);
    } else {
        echo "\nno match\n";
    }
}

?>

example output:

Google Chrome 3.0.195.27 Windows xp

Lang:,,de-DE''
Array
(
    [0] => de-DE
    [primarytag] => de
    [1] => de
    [subtag] => DE
    [2] => DE
)
Lang:,,de;q=0.8''
Array
(
    [0] => de;q=0.8
    [primarytag] => de
    [1] => de
    [subtag] => 
    [2] => 
    [quantifier] => 0.8
    [3] => 0.8
)
Lang:,,en-US;q=0.6''
Array
(
    [0] => en-US;q=0.6
    [primarytag] => en
    [1] => en
    [subtag] => US
    [2] => US
    [quantifier] => 0.6
    [3] => 0.6
)
Lang:,,en;q=0.4''
Array
(
    [0] => en;q=0.4
    [primarytag] => en
    [1] => en
    [subtag] => 
    [2] => 
    [quantifier] => 0.4
    [3] => 0.4
)

down

php at isnoop dot net ¶

14 years ago

Use the apache SetEnv directive to set arbitrary $_SERVER variables in your vhost or apache config.

SetEnv varname "variable value"

down

sammyhacker at gmail dot com ¶

3 years ago

To put it simply, $_SERVER contains all the environment variables. 

CGI works by an HTTP application server filling in all the required environment variables and invoking the PHP process. And these environment variables are stored under $_SERVER.

down

plugwash at p10link dot net ¶

9 years ago

Be aware that it's a bad idea to access x-forwarded-for and similar headers through this array. The header names are mangled when populating the array and this mangling can introduce spoofing vulnerabilities.

See http://en.wikipedia.org/wiki/User:Brion_VIBBER/Cool_Cat_incident_report for details of a real world exploit of this.

down

jit_chavan at yahoo dot com ¶

10 years ago

searched $_SERVER["REDIRECT_URL"] for a while and noted that it is not mentioned in php documentation page itself. look like this is only generated by apache server(not others) and using   $_SERVER["REQUEST_URI"] will be useful in some cases as mine.

down

-1

chris at ocproducts dot com ¶

7 years ago

Guide to script parameters...

Data: $_GET
Data type: Array (map)
Purpose: Contains all GET parameters (i.e. a parsed URL query string).
Caveat: GET parameter names have to be compliant with PHP variable naming, e.g. dots are not allowed and get substituted.
Works on web mode: Yes
Works on CLI mode: No

Data: $_SERVER['QUERY_STRING']
Data type: String
Purpose: Gets an unparsed URL query string.
Caveat: Not set on all PHP environments, may need setting via http_build_query($_GET).
Works on web mode: Yes
Works on CLI mode: No

Data: $_SERVER['argv']
Data type: Array (list)
Purpose: Get CLI call parameters.
Works on web mode: Tenuous (just contains a single parameter, the query string)
Works on CLI mode: Yes

down

wbeaumo1 at gmail dot com ¶

14 years ago

Don't forget $_SERVER['HTTP_COOKIE']. It contains the raw value of the 'Cookie' header sent by the user agent.

down

-3

2962051004 at qq dot com ¶

6 years ago

<?php
/*
Sometimes you will find that your website will not get the correct user IP after adding CDN, then this function will help you
*/
function real_ip()
{
   $ip = $_SERVER['REMOTE_ADDR'];
    if (isset($_SERVER['HTTP_X_FORWARDED_FOR']) && preg_match_all('#\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}#s', $_SERVER['HTTP_X_FORWARDED_FOR'], $matches)) {
        foreach ($matches[0] AS $xip) {
            if (!preg_match('#^(10|172\.16|192\.168)\.#', $xip)) {
                $ip = $xip;
                break;
            }
        }
    } elseif (isset($_SERVER['HTTP_CLIENT_IP']) && preg_match('/^([0-9]{1,3}\.){3}[0-9]{1,3}$/', $_SERVER['HTTP_CLIENT_IP'])) {
        $ip = $_SERVER['HTTP_CLIENT_IP'];
    } elseif (isset($_SERVER['HTTP_CF_CONNECTING_IP']) && preg_match('/^([0-9]{1,3}\.){3}[0-9]{1,3}$/', $_SERVER['HTTP_CF_CONNECTING_IP'])) {
        $ip = $_SERVER['HTTP_CF_CONNECTING_IP'];
    } elseif (isset($_SERVER['HTTP_X_REAL_IP']) && preg_match('/^([0-9]{1,3}\.){3}[0-9]{1,3}$/', $_SERVER['HTTP_X_REAL_IP'])) {
        $ip = $_SERVER['HTTP_X_REAL_IP'];
    }
    return $ip;

}
echo real_ip();

?>

down

-2

Johan Winge ¶

4 years ago

It should probably be noted that the value of $_SERVER['SERVER_PROTOCOL'] will never contain the substring "HTTPS". Assuming this is a common source of bugs and confusion. Instead, see $_SERVER['HTTPS'].

down

-5

cupy at email dot cz ¶

15 years ago

Tech note:
$_SERVER['argc'] and $_SERVER['argv'][] has some funny behaviour,
used from linux (bash) commandline, when called like 
"php ./script_name.php 0x020B" 
there is everything correct, but 
"./script_name.php 0x020B"
is not correct - "0" is passed instead of "0x020B" as $_SERVER['argv'][1] - see the script below.
Looks like the parameter is not passed well from bash to PHP.
(but, inspected on the level of bash, 0x020B is understood well as $1)

try this example:

------------->8------------------
cat ./script_name.php
#! /usr/bin/php

if( $_SERVER['argc'] == 2)
  {
    // funny... we have to do this trick to pass e.g. 0x020B from parameters
    // ignore this: "PHP Notice:  Undefined offset:  2 in ..."
    $EID = $_SERVER['argv'][1] + $_SERVER['argv'][2] + $_SERVER['argv'][3];
  }
 else
   {        // default
     $EID = 0x0210; // PPS failure
   }

＋add a note

$_SERVER

Description

Indices

Examples

Notes

See Also

Found A Problem?

User Contributed Notes 38 notes