PHP 8.3.4 Released!

ftp_get

(PHP 4, PHP 5, PHP 7, PHP 8)

ftp_getLädt eine Datei von einem FTP-Server herunter

Beschreibung

ftp_get(
    FTP\Connection $ftp,
    string $local_filename,
    string $remote_filename,
    int $mode = FTP_BINARY,
    int $offset = 0
): bool

ftp_get() lädt eine Datei vom FTP-Server herunter und speichert sie in eine lokale Datei.

Parameter-Liste

ftp

Eine FTP\Connection-Instanz.

local_filename

Der lokale Dateipfad (wird überschrieben, falls die Datei schon existiert).

remote_filename

Der Pfad zur Datei auf dem Server.

mode

Der Transfer-Modus. Muss entweder FTP_ASCII oder FTP_BINARY sein.

offset

Die Position in der entfernten Datei, ab der der Download beginnen soll.

Rückgabewerte

Gibt bei Erfolg true zurück. Bei einem Fehler wird false zurückgegeben.

Changelog

Version Beschreibung
8.1.0 Der Parameter ftp erwartet nun eine FTP\Connection-Instanz; vorher wurde eine Ressource erwartet.
7.3.0 Der Parameter mode ist nun optional. Zuvor war er verpflichtend.

Beispiele

Beispiel #1 ftp_get()-Beispiel

<?php

// Variablen definieren
$local_file = 'local.zip';
$server_file = 'server.zip';

// Verbindung aufbauen
$ftp = ftp_connect($ftp_server);

// Login mit Benutzername und Passwort
$login_result = ftp_login($ftp, $ftp_user_name, $ftp_user_pass);

// Versuche, $server_file herunterzuladen und in $local_file zu speichern
if (ftp_get($ftp, $local_file, $server_file, FTP_BINARY)) {
echo
"$local_file wurde erfolgreich geschrieben\n";
} else {
echo
"Ein Fehler ist aufgetreten\n";
}

// Verbindung schließen
ftp_close($ftp);

?>

Siehe auch

  • ftp_pasv() - Schaltet den passiven Modus ein oder aus
  • ftp_fget() - Lädt eine Datei vom FTP-Server und speichert sie in eine geöffnete Datei
  • ftp_nb_get() - Überträgt eine Datei vom FTP-Server und speichert sie lokal (nicht blockierend)
  • ftp_nb_fget() - Ruft eine Datei vom FTP-Server ab und schreibt sie in eine lokale Datei (nicht-blockierend)

add a note

User Contributed Notes 18 notes

up
37
CuDi
14 years ago
I tried to ftp a 7mb file today off my webserver.

I copied this example directly and it told me.

Port command successful
"there was a problem"

I thought it was because of the size.
But I guessed it might be cause of my firewall.

So I made the ftp connection passive:

<?PHP

...
$login_result = ftp_login($conn_id, $ftp_user_name, $ftp_user_pass);
ftp_pasv($conn_id, true);

?>

Ran the script again & it worked fine.

Hope this helps someone
up
36
bob at notallhere dot com
10 years ago
Don't want to use an intermediate file? Use 'php://output' as the filename and then capture the output using output buffering.

ob_start();
$result = ftp_get($ftp, "php://output", $file, FTP_BINARY);
$data = ob_get_contents();
ob_end_clean();

Don't forget to check $result to make sure there wasn't an error. After that, manipulate the $data variable however you want.
up
14
ramiro at qusarcr dot com
21 years ago
Keep in mind that ftp_get will overwrite the file on your local machine if it has the same name.
up
9
anomie at users dot sf dot net
17 years ago
Why there isn't an "ftp_get_contents" function, I don't know. It takes a little work to emulate one, but it's doable.
<?php
function ftp_get_contents($ftp_stream, $remote_file, $mode, $resume_pos=null){
$pipes=stream_socket_pair(STREAM_PF_UNIX, STREAM_SOCK_STREAM, STREAM_IPPROTO_IP);
if(
$pipes===false) return false;
if(!
stream_set_blocking($pipes[1], 0)){
fclose($pipes[0]); fclose($pipes[1]);
return
false;
}
$fail=false;
$data='';
if(
is_null($resume_pos)){
$ret=ftp_nb_fget($ftp_stream, $pipes[0], $remote_file, $mode);
} else {
$ret=ftp_nb_fget($ftp_stream, $pipes[0], $remote_file, $mode, $resume_pos);
}
while(
$ret==FTP_MOREDATA){
while(!
$fail && !feof($pipes[1])){
$r=fread($pipes[1], 8192);
if(
$r==='') break;
if(
$r===false){ $fail=true; break; }
$data.=$r;
}
$ret=ftp_nb_continue($ftp_stream);
}
while(!
$fail && !feof($pipes[1])){
$r=fread($pipes[1], 8192);
if(
$r==='') break;
if(
$r===false){ $fail=true; break; }
$data.=$r;
}
fclose($pipes[0]); fclose($pipes[1]);
if(
$fail || $ret!=FTP_FINISHED) return false;
return
$data;
}
?>

Something similar would work to write a ftp_put_contents function, too.
up
4
Nate from ruggfamily.com
15 years ago
Here's a quick function that figures out the correct mode to use based on a file's extension.

<?php
function get_ftp_mode($file)
{
$path_parts = pathinfo($file);

if (!isset(
$path_parts['extension'])) return FTP_BINARY;
switch (
strtolower($path_parts['extension'])) {
case
'am':case 'asp':case 'bat':case 'c':case 'cfm':case 'cgi':case 'conf':
case
'cpp':case 'css':case 'dhtml':case 'diz':case 'h':case 'hpp':case 'htm':
case
'html':case 'in':case 'inc':case 'js':case 'm4':case 'mak':case 'nfs':
case
'nsi':case 'pas':case 'patch':case 'php':case 'php3':case 'php4':case 'php5':
case
'phtml':case 'pl':case 'po':case 'py':case 'qmail':case 'sh':case 'shtml':
case
'sql':case 'tcl':case 'tpl':case 'txt':case 'vbs':case 'xml':case 'xrc':
return
FTP_ASCII;
}
return
FTP_BINARY;
}

// sample usage
ftp_get($conn_id, $local_file, $server_file, get_ftp_mode($server_file));
?>
up
7
mroerick at gmx dot net
14 years ago
ftp_sync is a way to walk the directory structure on the server and copy every directory and file to the same location locally.

<?php
$ftp_server
= "ftp.example.com";
$conn_id = ftp_connect ($ftp_server)
or die(
"Couldn't connect to $ftp_server");

$login_result = ftp_login($conn_id, "user", "pass");
if ((!
$conn_id) || (!$login_result))
die(
"FTP Connection Failed");

ftp_sync ("DirectoryToCopy"); // Use "." if you are in the current directory

ftp_close($conn_id);

// ftp_sync - Copy directory and file structure
function ftp_sync ($dir) {

global
$conn_id;

if (
$dir != ".") {
if (
ftp_chdir($conn_id, $dir) == false) {
echo (
"Change Dir Failed: $dir<BR>\r\n");
return;
}
if (!(
is_dir($dir)))
mkdir($dir);
chdir ($dir);
}

$contents = ftp_nlist($conn_id, ".");
foreach (
$contents as $file) {

if (
$file == '.' || $file == '..')
continue;

if (@
ftp_chdir($conn_id, $file)) {
ftp_chdir ($conn_id, "..");
ftp_sync ($file);
}
else
ftp_get($conn_id, $file, $file, FTP_BINARY);
}

ftp_chdir ($conn_id, "..");
chdir ("..");

}
?>
up
1
Aditya P dot Bhatt (adityabhai at gmail dot com)
15 years ago
<?php
// define some variables
$folder_path = "YOUR FOLDER PATH";
$local_file = "LOCAL FILE PATH";
$server_file = "SERVER FILE PATH";

//-- Connection Settings
$ftp_server = "IP ADDRESS"; // Address of FTP server.
$ftp_user_name = "USERNAME"; // Username
$ftp_user_pass = "PASSWORD"; // Password
#$destination_file = "FILEPATH";

// set up basic connection
$conn_id = ftp_connect($ftp_server);

// login with username and password
$login_result = ftp_login($conn_id, $ftp_user_name, $ftp_user_pass);

// try to download $server_file and save to $local_file
if (ftp_get($conn_id, $local_file, $server_file, FTP_BINARY)) {
echo
"Successfully written to $local_file\n";
} else {
echo
"There was a problem\n";
}

// close the connection
ftp_close($conn_id);
?>
up
0
mpatnode at yahoo dot com
5 years ago
Note that PHP still defaults to FTP active mode by default, which is almost never used anymore since the creation of firewalls. Don't forget to add a ftp_pasv($conn, true) after your ftp_login.
up
0
anomie at users dot sf dot net
17 years ago
Crud. The _nb_ only refers to reading from the ftp server, and the buffer in the socket pair is only about 364 bytes. So it doesn't work for files larger than that size.
up
-1
administrator at gesoft dot org
17 years ago
Hello everybody,

If someone will try to download files to the same local file (some temporary file), like shown here:

<?php
foreach ($files as $key=>$path) {
...
$result = ftp_get($ftpConnId, 'temp.tmp', $path, FTP_BINARY);
...
}
?>

please take in consideration the fact that you will have big problems with downloading (getting) hole files. In other words ‘temp.tmp’ file always will have the same size equal to first downloaded file despite the real size of downloading file. I have not idea what is the reason!

If someone will think that problem is just in getting proper file size (which you will get using filssize() function) he will be mistaken. The download file’s size is not equal to source file’s size materially, that means fflush() function will not solve the problem (I have tried this as well).

Finally the solution was founded: before downloading a file you will need to delete local file if such exist (‘temp.tmp’). So working code will look like:

<?php
foreach ($files as $key=>$path) {
...
if (
file_exists('temp.tmp')) {
unlink('temp.tmp');
}
$result = ftp_get($ftpConnId, 'temp.tmp', $path, FTP_BINARY);
...
}
?>

Good luck in scripting :-)

Vitali Simsive
up
-1
miki at epoch dot co dot il
11 years ago
If you ran the example and see that it fail after 90sec (timeout).

Then try adding:
<?php
ftp_pasv
($ftp_conn, true);
?>
up
-2
corey-holzer at nyc dot rr dot com
20 years ago
The zero size file is not a side effect. When the ftp_get starts the first thing it does is to create the inode/file which it will stream the data too and that is a zero size file with the nname you specified for the local file. When the download fails it leaves the file in place.
up
-1
thivierr at telus dot net
20 years ago
If you previously downloaded a file before (like a huge web log), and just want to get the remaining portion, do this:

$local_file_size = filesize($local_file_path);
$get_result = ftp_get($conn_id, $local_file_path, $remote_file_path, FTP_BINARY, $local_file_size);

This same code works regardless of wether the local file exists already or not. You should first test to make sure the local file is not bigger than the remote file.
up
-7
Ben Parish
12 years ago
On Windows (and possibly *NIX) you will get "[function.ftp-get]: failed to open stream: No such file or directory in..." errors if the local_file path contains directory paths that do not already exist.

Even with write permissions ftp_get can create the file but it will NOT automatically create the parent directories as you might expect.
up
-3
scott dot chu at udngroup dot com
7 years ago
I'd suggest use ftp_fget() instead of ftp_get() since the latter only return TRUE or FALSE and there's no obvious way to get the cause of failure.

Using ftp_fget, you have to pass a file handle as local file, so you have to do fopen() first. By way of this, you can find 'Permission Denied' problem when call fopen(). If you use ftp_get(), there's no way to find this error cause.

In my case, I run httpd using 'nobody' and I create ftp local folder using 'haha'. It tooks me long time to find the 'Permission Denied' problem at that time since I use ftp_get() then.
up
-13
w dot danford at electronics-software dot com
15 years ago
A subtle issue with the ftp_get() function. The second param, string $local_file, is a file name on the SERVER running the php script. It is NOT a file on the client machine running the browser. I erroneously tried to use this ftp to download a file from my site to my local system. I entered the full path starting with the drive letter ("h:/...") on a system running WIN XP and kept getting a failure of unable to open (destination) file. Only after just putting in a file name with no pathing did I see where the file was written. It was in the directory on my site where the php script is located (hosting is managed shared LAMP server which supports multiple url's, GoDaddy hosting).
up
-6
apurvavora19 at gmail dot com
5 years ago
I am using ftp_get function to download a file from the FTP server to my web server where my php script is running.
On the webserver, I want the file to be downloaded to a directory which has a structure as follows -> Data/Files/localfilename.exe

However, when I specify the above string in the $local_file_name parameter of ftp_get I get an error saying the file does not exist.

I am running a Windows Server and the php script is running from C:/xampp/htdocs/file.php

Is there any way where I can specify the path on the web server where the file is supposed to be downloaded ?
up
-12
danny at ingeniarte dot com
13 years ago
Remember to use the full server paths to the directories you are working on. Server paths are not the same as "ftp paths".

I was using the path displayed on my FTP client to download and upload files and I kept getting "Not found" or "Permission Denied" errors.
To Top