PHP 8.3.4 Released!

ネットワーク 関数

目次

  • checkdnsrr — 指定したインターネットホスト名もしくは IP アドレスに対応する DNS レコードを検索する
  • closelog — システムログへの接続を閉じる
  • dns_check_record — checkdnsrr のエイリアス
  • dns_get_mx — getmxrr のエイリアス
  • dns_get_record — ホスト名に関連する DNS リソースレコードを取得する
  • fsockopen — インターネット接続もしくは Unix ドメインソケット接続をオープンする
  • gethostbyaddr — 指定した IP アドレスに対応するインターネットホスト名を取得する
  • gethostbyname — インターネットホスト名に対応するIPv4アドレスを取得する
  • gethostbynamel — 指定したインターネットホスト名に対応するIPv4アドレスのリストを取得する
  • gethostname — ホスト名を取得する
  • getmxrr — 指定したインターネットホスト名に対応する MX レコードを取得する
  • getprotobyname — プロトコル名のプロトコル番号を得る
  • getprotobynumber — プロトコル番号が指すプロトコル名を取得する
  • getservbyname — インターネットサービスおよびプロトコルが関連するポート番号を取得する
  • getservbyport — ポートおよびプロトコルに対応するインターネットサービスを得る
  • header_register_callback — ヘッダ用の関数を登録する
  • header_remove — 以前に設定したHTTPヘッダを削除する
  • header — 生の HTTP ヘッダを送信する
  • headers_list — 送信した (もしくは送信される予定の) レスポンスヘッダの一覧を返す
  • headers_sent — ヘッダが既に送信されているかどうかを調べる
  • http_response_code — HTTP レスポンスコードを取得または設定
  • inet_ntop — パックされたインターネットアドレスを、人間が読める形式に変換する
  • inet_pton — 人間が読める形式の IP アドレスを、パックされた in_addr 形式に変換する
  • ip2long — ドット表記の (IPv4) IP アドレスを、長整数表現に変換する
  • long2ip — 長整数表現のインターネットアドレスを (IPv4) インターネット標準ドット表記に変換する
  • net_get_interfaces — ネットワークインターフェイスを取得する
  • openlog — システムのロガーへの接続をオープンする
  • pfsockopen — 持続的な Internet または Unix ドメインソケット接続をオープンする
  • setcookie — クッキーを送信する
  • setrawcookie — 値を URL エンコードせずにクッキーを送信する
  • socket_get_status — stream_get_meta_data のエイリアス
  • socket_set_blocking — stream_set_blocking のエイリアス
  • socket_set_timeout — stream_set_timeout のエイリアス
  • syslog — システムログのメッセージを生成する
add a note

User Contributed Notes 14 notes

up
36
claudiu at cnixs dot com
16 years ago
A simple and very fast function to check against CIDR.

Your previous examples are too complicated and involves a lot of functions call.

Here it is (only with arithmetic operators and call only to ip2long () and split() ):
<?php
function ipCIDRCheck ($IP, $CIDR) {
list (
$net, $mask) = split ("/", $CIDR);

$ip_net = ip2long ($net);
$ip_mask = ~((1 << (32 - $mask)) - 1);

$ip_ip = ip2long ($IP);

$ip_ip_net = $ip_ip & $ip_mask;

return (
$ip_ip_net == $ip_net);
}
?>
call example: <?php echo ipCheck ("192.168.1.23", "192.168.1.0/24"); ?>
up
11
Anton Avramov - lukav at lukav dot com
6 years ago
An improved version of claudiu at cnixs dot com not using split and working with the following:
ip: 192.168.101.123, CIRD: 192.168.101.144/24

<?php
function ipCIDRCheck ($IP, $CIDR) {
list (
$net, $mask) = explode ('/', $CIDR);

$ip_net = ip2long ($net);
$ip_mask = ~((1 << (32 - $mask)) - 1);

$ip_ip = ip2long ($IP);

return ((
$ip_ip & $ip_mask) == ($ip_net & $ip_mask));
}
?>
up
5
Anonymous
7 years ago
improved version of philippe-at-cyberabuse.org's answer:

<?php
function cidrconv($net) {
$start = strtok($net,"/");
$n = 3 - substr_count($net, ".");
if (
$n > 0)
{
for (
$i = $n;$i > 0; $i--)
$start .= ".0";
}
$bits1 = str_pad(decbin(ip2long($start)), 32, "0", STR_PAD_LEFT);
$net = (1 << (32 - substr(strstr($net, "/"), 1))) - 1;
$bits2 = str_pad(decbin($net), 32, "0", STR_PAD_LEFT);
$final = "";
for (
$i = 0; $i < 32; $i++)
{
if (
$bits1[$i] == $bits2[$i]) $final .= $bits1[$i];
if (
$bits1[$i] == 1 and $bits2[$i] == 0) $final .= $bits1[$i];
if (
$bits1[$i] == 0 and $bits2[$i] == 1) $final .= $bits2[$i];
}
return array(
$start, long2ip(bindec($final)));
}
?>
up
2
David GASTALDIN
16 years ago
Here a IP-Range to CIDRs function that I wrote for the purpose of filling my Postfix client.cidr with ripe-ncc data to block spamming from useless countries. Strcmp functions are meant to work around the silly PHP string comparison which inevitably tries compare strings as numbers when possible. I'll make no comment about that fact ... bit I have to bite my tong hard :

function PlageVersCIDRs($ip_min, $ip_max) {
$cidrs = array();
$ip_min_bin = sprintf('%032b', $ip_min);
$ip_max_bin = sprintf('%032b', $ip_max);
$ip_cour_bin = $ip_min_bin;
while (strcmp($ip_cour_bin, $ip_max_bin) <= 0) {
$lng_reseau = 32;
$ip_reseau_bin = $ip_cour_bin;
while (($ip_cour_bin[$lng_reseau - 1] == '0') && (strcmp(substr_replace($ip_reseau_bin, '1', $lng_reseau - 1, 1), $ip_max_bin) <= 0)) {
$ip_reseau_bin[$lng_reseau - 1] = '1';
$lng_reseau--;
}
$cidrs[] = long2ip(bindec($ip_cour_bin)).'/'.$lng_reseau;
$ip_cour_bin = sprintf('%032b', bindec($ip_reseau_bin) + 1);
}
return $cidrs;
}
up
2
philippe-at-cyberabuse.org
22 years ago
PHP miss CIDR functions.

This one will convert a CIDR like this:
0.0.0.0/16 -> 0.0.0.0 - 0.0.255.255
127.0/16 -> 127.0.0.0 - 127.0.255.255
etc...

function cidrconv($net) {
$start=strtok($net,"/");
$n=3-substr_count($net, ".");
if ($n>0) { for ($i=$n;$i>0;$i--) $start.=".0"; }
$bits1=str_pad(decbin(ip2long($start)),32,"0","STR_PAD_LEFT");
$net=pow(2,(32-substr(strstr($net,"/"),1)))-1;
$bits2=str_pad(decbin($net),32,"0","STR_PAD_LEFT");
for ($i=0;$i<32;$i++) {
if ($bits1[$i]==$bits2[$i]) $final.=$bits1[$i];
if ($bits1[$i]==1 and $bits2[$i]==0) $final.=$bits1[$i];
if ($bits1[$i]==0 and $bits2[$i]==1) $final.=$bits2[$i];
}
return $start." - ".long2ip(bindec($final));
}
up
-1
-dR
8 years ago
This little function might come in handy

<?php
function cidr_range( $cidr, $chkip=null )
{
// Assign IP / mask
list($ip,$mask) = explode("/",$cidr);

// Sanitize IP
$ip1 = preg_replace( '_(\d+\.\d+\.\d+\.\d+).*$_', '$1', "$ip.0.0.0" );

// Calculate range
$ip2 = long2ip( ip2long( $ip1 ) - 1 + ( 1 << ( 32 - $mask) ) );

// are we cidr range cheking?
if ( $chkip != null && ! filter_var( $chkip, FILTER_VALIDATE_IP, FILTER_FLAG_IPV4) === false )
{
return
ip2long( $ip1 ) <= ip2long( $chkip ) && ip2long( $ip2 ) >= ip2long( $chkip ) ? true : false;
} else {
return
"$ip1 - $ip2";
}
}

var_dump( cidr_range( "127.0/16", "127.0.0.1" ) ); // bool(true)
var_dump( cidr_range( "127.0/16", "192.168.0.1" ) ); // bool(false)
var_dump( cidr_range( "192.168.0.0/24" ) ); // string(27) "192.168.0.0 - 192.168.0.255"

?>
up
-1
nexxer at rogers dot com
19 years ago
In Trevor Hemsley's translation of the perl range2cidr function, the

while ($end > $start)

condition should be

while ($end >= $start)

otherwise it won't work for /32s, ie if you feed range2cidr("1.2.3.4", "1.2.3.4").

-- nex
up
-3
Anonymous
20 years ago
Alternative cidr_conv function - a little easier to follow

function cidr_conv($cidr_address) {
$first = substr($cidr_address, 0, strpos($cidr_address, "/"));
$netmask = substr(strstr($cidr_address, "/"), 1);

$first_bin = str_pad(decbin(ip2long($first)), 32, "0", STR_PAD_LEFT);
$netmask_bin = str_pad(str_repeat("1", (integer)$netmask), 32, "0", STR_PAD_RIGHT);

for ($i = 0; $i < 32; $i++) {
if ($netmask_bin[$i] == "1")
$last_bin .= $first_bin[$i];
else
$last_bin .= "1";
}

$last = long2ip(bindec($last_bin));

return "$first - $last";
}
up
-4
samuele at norsam dot org
20 years ago
To find if an IP is in a net/mask (very fast):
<?php
function isIPIn($ip,$net,$mask) {
$lnet=ip2long($net);
$lip=ip2long($ip);
$binnet=str_pad( decbin($lnet),32,"0","STR_PAD_LEFT" );
$firstpart=substr($binnet,0,$mask);
$binip=str_pad( decbin($lip),32,"0","STR_PAD_LEFT" );
$firstip=substr($binip,0,$mask);
return(
strcmp($firstpart,$firstip)==0);
}
?>

This function can be compacted, avoiding some variable settings, but the function will not be too clear to read...
Example code, used to made a kind of location service network-based:

<?php
$n
= array ( "192.168.0.0/16" => "TUSCANY",
"192.168.1.0/24" => "- Florence",
"192.168.2.0/24" => "- Pisa",
"192.168.3.0/24" => "- Siena",
"192.168.64.0/21" => "- Tuscan Archipelago",
"192.168.64.0/23" => "--- Elba Island",
"192.168.66.0/24" => "--- Capraia Island",
"192.168.67.0/24" => "--- Giannutri Island");

// Normally you should use the following line
$myip = $HTTP_SERVER_VARS['REMOTE_ADDR'];
// This is first example: returns Tuscany/Pisa
$myip = "192.168.2.33";
// This is second example: returns Tuscany/T.Arch./Elba
$myip = "192.168.65.34";

echo
"Your position:<br />\n";
foreach (
$n as $k=>$v ) {
list(
$net,$mask)=split("/",$k);
if (
isIPIn($myip,$net,$mask)) {
echo
$n[$k]."<br />\n"; }
}
?>

and so on...
up
-4
dand at ddchosting.com
17 years ago
When I was working on a project I ran into this problem with redirecting. My solution is as follows:
header("Refresh: 5; url=../main/main.php?".session_id()."");

This allowed me to pass the session_id() which is used throughout site to make sure user has loged in.
I hope this helps!
up
-5
metator at netcabo dot pt
18 years ago
Regarding samuele's note:

You can get faster code if you apply directly what happens in network devices, such as routers. If you AND (logic operation) the remote ip against the local netmask the result will be the network ip if the remote ip is from the local network. Example:

192.168.0.16 = 11000000.10101000.00000000.00010000
& 255.255.255.0 = 11111111.11111111.11111111.00000000
--------------------------------------------------------------
192.168.0.0 = 11000000.10101000.00000000.00000000

And now the code. My example uses a html form where you place the values you want to test:

<HTML><HEAD><TITLE>Check IP</TITLE>
</HEAD><BODY>
<form action="<?php echo $_SERVER['PHP_SELF']; ?>" method="POST">

Hope you find this useful.
IP to check: <input type="text" name="ip"> <br>
Local network ip: <input type="text" name="net"> <br>
Local netmask: <input type="text" name="mask"> <br>
<input type="submit" name="check" value="Check it!">
</form>
<?php

/**
* @param string $ip IP to check in dotted decimal format
* @param string $net Network IP in dotted decimal format
* @param string $mask Netmask in dotted decimal format
* @returns true if the ip belongs to the network, false otherwise
**/
function isIPIn($ip, $net, $mask) {
//doesn't check for the return value of ip2long
$ip = ip2long($_POST['ip']);
$rede = ip2long($_POST['net']);
$mask = ip2long($_POST['mask']);

//AND
$res = $ip & $mask;

return (
$res == $rede);
}

if (isset(
$_POST['check'])) {
echo
isIPIn($_POST['ip'], $_POST['net'], $_POST['mask']) ? "IP IN.": "IP OUT.";
}
?>
</BODY><HTML>
up
-6
anderson at piq dot com dot br
20 years ago
If you want to get the interface of an IP, based on the local route table, use this.

function GetIfaceforIP($user_ip)
{
$route = "/bin/netstat -rn";

exec($route, $aoutput);
foreach($aoutput as $key => $line)
{
if($key > 1)
{
$line = ereg_replace("[[:space:]]+",",",$line);
list($network, $gateway, $mask, $flags, $mss, $window, $irtt, $iface) = explode(",", $line)
if((ip2long($user_ip) & ip2long($mask)) == ip2long($network))
{
return $iface;
}
}
}
}
up
-8
trevor-hemsley at nospam dot dial dot pipex dot com
21 years ago
Previous example of IP range to CIDR list does not cope with ranges as well as the perl Net::Netmask range2cidrlist() function. In PHP this looks like

<?
function imask($this)
{
// use base_convert not dechex because dechex is broken and returns 0x80000000 instead of 0xffffffff
return base_convert((pow(2,32) - pow(2, (32-$this)))), 10, 16);
}

function imaxblock($ibase, $tbit)
{
while ($tbit > 0)
{
$im = hexdec(imask($tbit-1));
$imand = $ibase & $im;
if ($imand != $ibase)
{
break;
}
$tbit--;
}
return $tbit;
}

function range2cidrlist($istart, $iend)
{
// this function returns an array of cidr lists that map the range given
$s = explode(".", $istart);
// PHP ip2long does not handle leading zeros on IP addresses! 172.016 comes back as 172.14, seems to be treated as octal!
$start = "";
$dot = "";
while (list($key,$val) = each($s))
{
$start = sprintf("%s%s%d",$start,$dot,$val);
$dot = ".";
}
$end = "";
$dot = "";
$e = explode(".",$iend);
while (list($key,$val) = each($e))
{
$end = sprintf("%s%s%d",$end,$dot,$val);
$dot = ".";
}
$start = ip2long($start);
$end = ip2long($end);
$result = array();
while ($end > $start)
{
$maxsize = imaxblock($start,32);
$x = log($end - $start + 1)/log(2);
$maxdiff = floor(32 - floor($x));
$ip = long2ip($start);
if ($maxsize < $maxdiff)
{
$maxsize = $maxdiff;
}
array_push($result,"$ip/$maxsize");
$start += pow(2, (32-$maxsize));
}
return $result;
}
?>
up
-8
philippe-at-cyberabuse.org
21 years ago
... and this one will do the opposite (o return NULL for invalid netblocks) :

1.0.0.0 1.0.255.255 -> 1.0.0.0/16
1.0.0.0 1.3.255.255 -> 1.0.0.0/14
192.168.0.0 192.168.0.255 -> 192.168.0.0/24

function ip2cidr($ip_start,$ip_end) {
if(long2ip(ip2long($ip_start))!=$ip_start or long2ip(ip2long($ip_end))!=$ip_end) return NULL;
$ipl_start=(int)ip2long($ip_start);
$ipl_end=(int)ip2long($ip_end);
if($ipl_start>0 && $ipl_end<0) $delta=($ipl_end+4294967296)-$ipl_start;
else $delta=$ipl_end-$ipl_start;
$netmask=str_pad(decbin($delta),32,"0","STR_PAD_LEFT");
if(ip2long($ip_start)==0 && substr_count($netmask,"1")==32) return "0.0.0.0/0";
if($delta<0 or ($delta>0 && $delta%2==0)) return NULL;
for($mask=0;$mask<32;$mask++) if($netmask[$mask]==1) break;
if(substr_count($netmask,"0")!=$mask) return NULL;
return "$ip_start/$mask";
}
To Top