PHP 8.3.4 Released!

mysqli::__construct

mysqli::connect

mysqli_connect

(PHP 5, PHP 7, PHP 8)

mysqli::__construct -- mysqli::connect -- mysqli_connect Устанавливает новое соединение с сервером MySQL

Описание

Объектно-ориентированный стиль

public mysqli::__construct(
    ?string $hostname = null,
    ?string $username = null,
    ?string $password = null,
    ?string $database = null,
    ?int $port = null,
    ?string $socket = null
)
public mysqli::connect(
    ?string $hostname = null,
    ?string $username = null,
    ?string $password = null,
    ?string $database = null,
    ?int $port = null,
    ?string $socket = null
): bool

Процедурный стиль

mysqli_connect(
    ?string $hostname = null,
    ?string $username = null,
    ?string $password = null,
    ?string $database = null,
    ?int $port = null,
    ?string $socket = null
): mysqli|false

Устанавливает соединение с работающим сервером MySQL.

Список параметров

hostname

Может быть либо именем хоста, либо IP-адресом. При передаче null, значение извлекается из mysqli.default_host. По возможности вместо протокола TCP/IP будут использоваться каналы. Протокол TCP/IP используется, если указаны и имя хоста и номер порта, например, localhost:3308.

Если перед именем хоста задать строку p:, то будет открыто постоянное соединение. Если соединение открыто из пула подключений, будет автоматически вызвана функция mysqli_change_user().

username

Имя пользователя MySQL или null для принятия имени пользователя на основе ini-опции mysqli.default_user.

password

Пароль MySQL или null для принятия пароля на основе ini-опции mysqli.default_pw.

database

База данных по умолчанию, которая будет использоваться при выполнении запросов или null.

port

Номер порта для попытки подключения к серверу MySQL или null для принятия порта на основе ini-опции mysqli.default_port.

socket

Сокет или именованный пайп, который необходимо использовать или null для принятия сокета на основе ini-опции mysqli.default_socket.

Замечание:

Передача параметра socket не будет явно задавать тип соединения при подключении к серверу MySQL. То, как будет устанавливаться соединение с MySQL-сервером, определяется параметром hostname.

Возвращаемые значения

mysqli_connect() возвращает объект, который представляет соединение с сервером MySQL или false в случае ошибки.

mysqli::connect() возвращает true в случае успешного выполнения или false в случае ошибки. До PHP 8.1.0 в случае успешного выполнения возвращалось значение null.

Ошибки

Если уведомления об ошибках mysqli включены (MYSQLI_REPORT_ERROR) и запрошенная операция не удалась, выдаётся предупреждение. Если, кроме того, установлен режим MYSQLI_REPORT_STRICT, вместо этого будет выброшено исключение mysqli_sql_exception.

Список изменений

Версия Описание
8.1.0 Метод mysqli::connect() теперь возвращает значение true вместо null в случае успешного выполнения.
7.4.0 Все параметры теперь допускают значение null

Примеры

Пример #1 Пример использования mysqli::__construct()

Объектно-ориентированный стиль

<?php

/* Вы должны включить отчёт об ошибках для mysqli, прежде чем пытаться установить соединение */
mysqli_report(MYSQLI_REPORT_ERROR | MYSQLI_REPORT_STRICT);

$mysqli = new mysqli('localhost', 'my_user', 'my_password', 'my_db');

/* Установите желаемую кодировку после установления соединения */
$mysqli->set_charset('utf8mb4');

printf("Успешно... %s\n", $mysqli->host_info);
?>

Процедурный стиль

<?php

/* Вы должны включить отчёт об ошибках для mysqli, прежде чем пытаться установить соединение */
mysqli_report(MYSQLI_REPORT_ERROR | MYSQLI_REPORT_STRICT);

$mysqli = mysqli_connect('localhost', 'my_user', 'my_password', 'my_db');

/* Установите желаемую кодировку после установления соединения */
mysqli_set_charset($mysqli, 'utf8mb4');

printf("Успешно... %s\n", mysqli_get_host_info($mysqli));

Вывод приведённых примеров будет похож на:

Успешно... localhost via TCP/IP

Пример #2 Расширение класса mysqli

<?php

class FooMysqli extends mysqli {
public function
__construct($host, $user, $pass, $db, $port, $socket, $charset) {
mysqli_report(MYSQLI_REPORT_ERROR | MYSQLI_REPORT_STRICT);
parent::__construct($host, $user, $pass, $db, $port, $socket);
$this->set_charset($charset);
}
}

$db = new FooMysqli('localhost', 'my_user', 'my_password', 'my_db', 3306, null, 'utf8mb4');

Пример #3 Ручная обработка ошибок

Если отчёты об ошибках отключены, разработчик несёт ответственность за проверку и обработку ошибок

Объектно-ориентированный стиль

<?php

error_reporting
(0);
mysqli_report(MYSQLI_REPORT_OFF);
$mysqli = new mysqli('localhost', 'my_user', 'my_password', 'my_db');
if (
$mysqli->connect_errno) {
throw new
RuntimeException('ошибка соединения mysqli: ' . $mysqli->connect_error);
}

/* Установите желаемую кодировку после установления соединения */
$mysqli->set_charset('utf8mb4');
if (
$mysqli->errno) {
throw new
RuntimeException('ошибка mysqli: ' . $mysqli->error);
}

Процедурный стиль

<?php

error_reporting
(0);
mysqli_report(MYSQLI_REPORT_OFF);
$mysqli = mysqli_connect('localhost', 'my_user', 'my_password', 'my_db');
if (
mysqli_connect_errno()) {
throw new
RuntimeException('ошибка соединения mysqli: ' . mysqli_connect_error());
}

/* Установите желаемую кодировку после установления соединения */
mysqli_set_charset($mysqli, 'utf8mb4');
if (
mysqli_errno($mysqli)) {
throw new
RuntimeException('ошибка mysqli: ' . mysqli_error($mysqli));
}

Примечания

Замечание:

MySQLnd всегда подразумевает кодировку, которую использует по умолчанию сервер. Эта кодировка передаётся во время установки соединения/авторизации, которые использует mysqlnd.

Libmysqlclient по умолчанию использует кодировку, установленную в файле my.cnf или явным вызовом функции mysqli_options() до вызова функции mysqli_real_connect(), но после вызова функции mysqli_connect().

Замечание:

Если используется Объектно-ориентированный стиль: Если соединение установить не удалось, метод всё равно вернёт объект. Проверить успешность создания подключения можно либо функцией mysqli_connect_error() или с помощью свойства mysqli->connect_error, как показано в примерах.

Замечание:

Если необходимо задать дополнительные параметры подключения, вроде времени ожидания и т.п., то вместо этого метода необходимо использовать функцию mysqli_real_connect().

Замечание:

Вызов конструктора без параметров идентичен вызову функции mysqli_init().

Замечание:

Ошибка "Can't create TCP/IP socket (10106)" обычно означает, что директива конфигурации variables_order не содержит символ E. В Windows системах, если окружение не скопировано, переменная среды SYSTEMROOT будет недоступна, и у PHP возникнут проблемы с загрузкой Winsock.

Смотрите также

  • mysqli_real_connect() - Устанавливает соединение с сервером mysql
  • mysqli_options() - Установка настроек
  • mysqli_connect_errno() - Возвращает код ошибки последней попытки соединения
  • mysqli_connect_error() - Возвращает описание последней ошибки подключения
  • mysqli_close() - Закрывает ранее открытое соединение с базой данных

add a note

User Contributed Notes 13 notes

up
28
fugyl13 at gmail dot com
9 years ago
Note that on all >=Windows 7 Servers, a host name "localhost" will create a very expensive lookup (~1 Second).

That's because since Windows 7, the hosts file doesn't come with a preconfigured
127.0.0.1 localhost
anymore

So, if you notice a long connection creation, try "127.0.0.1" instead.
up
29
andres at 21brains dot com
9 years ago
Please do use set_charset("utf8") after establishing the connection if you want to avoid weird string issues. I do not know why the documentation does not warn you about this kind of stuff.

We had a hard time figuring out what was going on since we were using mb_detect_encoding and it said everything was UTF-8, but of course the display was wrong. If we used iconv from ISO-8859-1 to UTF-8 the strings looked fine, even though everything in the database had the right collation. So in the end, it was the connection that was the filter and although the notes for this function mention default charsets, it almost reads as a sidenote instead of a central issue when dealing with UTF and PHP/MySQL.
up
6
php at haravikk dot me
6 years ago
Just wanted to add a note for anyone looking to use the MySQLi persistent connections feature; it's important to note that PHP opens and retains one connection per database user per process.

What this means is that if you are hosting multiple applications, each with its own database user (as is good practice) then you will end up multiplying the number of connections that PHP may hold open.

For example, if you have PHP configured with a maximum of eight worker processes, and you regularly use four different database users, then your MySQL server will need to accept at LEAST a maximum of 32 connections, or else it will run out.

However, if you would like to minimise the number of connections, what you can do is instead is to open the connection using a "guest" user (with no privileges except logging in) and then use ->change_user() to switch to a more privileged user, before switching back to the guest when you're done. Since all of the connections would therefore belong to the guest user, PHP should only maintain one per worker process.
up
8
chris at ocproducts dot com
6 years ago
There's a separate port parameter, unlike mysql_connect. However, using host:port on the host parameter does actually work.

There is a caveat. If the host is 'localhost' then the port is ignored, whether you use a port parameter or the implicit syntax I mentioned above. This is because 'localhost' will make it use unix sockets rather than TCP/IP.
up
6
paul at mtnlist dot com
10 years ago
If you want to connect via an alternate port (other than 3306), as you might when using an ssh tunnel to another host, using "localhost" as the hostname will not work.

Using 127.0.0.1 will work. Apparently, if you specify the host as "localhost", the constructor ignores the port specified as an argument to the constructor.
up
-1
arnold at nijboer dot it
1 year ago
public mysqli::__construct(
    string $hostname = ini_get("mysqli.default_host"),
    string $username = ini_get("mysqli.default_user"),
    string $password = ini_get("mysqli.default_pw"),
    string $database = "",
    int $port = ini_get("mysqli.default_port"),
    string $socket = ini_get("mysqli.default_socket")
)

the mysqli construct looks at the Master PHP.ini values.
if you're using a local ini overwrite of some sort add the ini_get to you're php script:
$mysqli = new mysqli(ini_get("mysqli.default_host"),ini_get("mysqli.default_user"),ini_get("mysqli.default_pw"))
up
0
PaulieG
8 years ago
It should be noted that on PHP 7 (v7.0.2 at least), passing the empty string '' for the Port argument while connecting to 'localhost' will prevent the connection from being successful altogether.

To work around this, use 'null'.
up
-2
Anonymous
14 years ago
If you get an error like
Can't connect to MySQL server on 'localhost' (10061)
and you use named pipes/socket connections (or aren't sure how you installed the MySQL server) try the following connect command:

<?php
mysqli_connect
('.', $user_name, $password, $database_name, null, 'mysql');
?>

The '.' as hostname is absolutely necessary when using named pipes. 'localhost' won't work. 'mysql' is the standard name for the pipe/socket.
up
-5
Ben
9 years ago
A far more secure and language independent way of connecting to mysql is to use the READ_DEFAULT_FILE options. This passes the workload over to the mysql library, which allows for the configuration file itself to be outside of the scope of the language.

The config file itself is something like this:
[client]
user=user_u
password=user_password
host=dbhost
port=3306
database=the_database
default-character-set=utf8

The following code fragment (in OO mysql_i format)

$sqlconf='/var/private/my.cnf';
$sql = new mysqli;
$sql->init();
$sql->options(MYSQLI_READ_DEFAULT_FILE,$sqlconf);
$sql->real_connect();
up
-6
linguafranca2003 at yahoo dot com
9 years ago
mysqli can succeed in surprising ways, depending on the privileges granted to the user. For example,

GRANT USAGE ON *.* TO 'myuser'@'localhost' IDENTIFIED BY PASSWORD 'mypassword';
GRANT ALL PRIVILEGES ON `database_a`.* TO 'myuser'@'localhost';
CREATE DATABASE database_b;

<?php
$db
= new mysqli('localhost', 'myuser', 'mypassword', 'database_b');

if (
$db->connect_error) {
die(
'Connect Error (' . $db->connect_errno . ') '
. $mysqli->connect_error);
}

printf("SQLSTATE: %s\n", $this->db->sqlstate);
printf("Warning Count: %s\n", $db->warning_count);
$db->close();
?>

Will output:

SQLSTATE: 00000
Warning Count: 0

So, life is good — you're connected to the database and executing mysqli methods. Except, life isn't good, because you aren't actually using database_b because myuser doesn't have any privileges on it. You won't catch this until you try to perform a later operation, when you'll get an error, "MYSQL Error: No database selected", and find yourself scratching your head and thinking "what do you mean, of course I have a database selected; I selected one when I called the constructor".

As a result, you may want to perform an additional check after connecting to mysql, to confirm that you're actually connected not just to the mysql server, but to the actual database:

<?php
$db
= new mysqli('localhost', 'myuser', 'mypassword', 'database_b');

if (
$db->connect_error) {
die(
'Connect Error (' . $db->connect_errno . ') '
. $mysqli->connect_error);
} elseif (
$result = $db->query("SELECT DATABASE()")) {
$row = $result->fetch_row();
if (
$row[0] != 'database_b') {
//oops! We're connected to mysql, but not to database_b
}
}
?>
up
-7
webmaster at aryes dot fr
8 years ago
A friend of mine encountered a sudden bug with CMS Piwigo. I discovered that :
- He had a hosting rule to use PHP 5.6.
- The hoster uses 5.6.6, verified using phpinfo();.
- The CMS declared a database name parameter as null.

That gallery CMS was unable to connect to MySQL and left only a warning message about it.

We tried to revert back to PHP 5.5, the CMS worked again.

Then we switched back to 5.6.6 and changed those lines :

$dbname = null;

$mysqli = new mysqli($host, $user, $password, $dbname, $port, $socket);

to

$dbname = ''; // Use an empty string, not null

$mysqli = new mysqli($host, $user, $password, $dbname, $port, $socket);

It worked!

So if you made the same mistake, using null where the manual invites to use an empty string, you should consider correcting your code.
up
-4
powtac at gmx de
5 years ago
Be careful, mysqli_connect() does not return a resource ! It returns an instance of the mysqli class (http://php.net/manual/class.mysqli.php) The old mysql_connect() function did return a resource.
up
-15
oleg at mastak dot fi
10 years ago
If you want to connect to local named pipe on windows and you get error "php_network_getaddresses: getaddrinfo failed: No such host is known. ", even if you using using "." as host, please check your if you are using mysqlnd driver: If this is true, then probably you need to update to version 5.4 of php:

Named pipes support for Windows was added in PHP version 5.4.0.
@ http://php.net/manual/en/mysqlnd.overview.php

Hopefully that will save you some time.
To Top