mysql_num_rows

(PHP 4, PHP 5)

mysql_num_rows — Liefert die Anzahl der Zeilen in einem Ergebnis

Warnung

Diese Erweiterung ist seit PHP 5.5.0 als veraltet markiert und wurde in PHP 7.0.0 entfernt. Verwenden Sie stattdessen die Erweiterungen MySQLi oder PDO_MySQL. Weitere Informationen bietet der Ratgeber MySQL: Auswahl einer API. Alternativen zu dieser Funktion umfassen:

Beschreibung

mysql_num_rows(resource $result): int|false

Gibt die Anzahl der Zeilen einer Ergebnismenge zurück. Diese Funktion ist nur gültig für Befehle wie SELECT oder SHOW, die eine tatsächliche Ergebnismenge zurückgeben. Haben Sie eine INSERT-, UPDATE- oder DELETE-Abfrage ausgeführt und möchten die Anzahl der betroffenen Datensätze ermitteln, verwenden Sie die Funktion mysql_affected_rows().

Parameter-Liste

result: Das Ergebnis Ressource, das ausgewertet wird. Dieses Ergebnis kommt von einem Aufruf von mysql_query().

Rückgabewerte

Gibt bei Erfolg die Anzahl der Zeilen in einer Ergebnismenge zurück. Bei einem Fehler wird false zurückgegeben.

Beispiele

Beispiel #1 mysql_num_rows()-Beispiel

<?php

$link = mysql_connect("localhost", "mysql_user", "mysql_password");
mysql_select_db("database", $link);

$result = mysql_query("SELECT * FROM table1", $link);
$num_rows = mysql_num_rows($result);

echo "$num_rows Zeilen\n";

?>

Anmerkungen

Hinweis:
Wenn Sie mysql_unbuffered_query() verwenden, gibt mysql_num_rows() solange nicht den korrekten Wert zurück, bis Sie alle Zeilen der Ergebnismenge erhalten haben.

Hinweis:
Für die Abwärtskompatibiliät kann der folgende veraltete Alias verwendet werden: mysql_numrows()

Siehe auch

mysql_affected_rows() - Liefert die Anzahl betroffener Datensätze einer vorhergehenden MySQL-Operation
mysql_connect() - Öffnet eine Verbindung zu einem MySQL-Server
mysql_data_seek() - Bewegt den internen Ergebnis-Zeiger
mysql_select_db() - Wählt eine MySQL-Datenbank aus
mysql_query() - Sendet eine Abfrage an MySQL

Found A Problem?

Learn How To Improve This Page • Submit a Pull Request • Report a Bug

＋add a note

User Contributed Notes 17 notes

down

sam at liddicott dot com ¶

20 years ago

Some user comments on this page, and some resources including the FAQ at :

http://www.faqts.com/knowledge_base/view.phtml/aid/114/fid/12 suggest using count(*) to count the number of rows

This is not a particularly universal solution, and those who read these comments on this page should also be aware that 

select count(*) may not give correct results if you are using "group by" or "having" in your query, as count(*) is an agregate function and resets eachtime a group-by column changes.

select sum(..) ... left join .. group by ... having ...

can be an alternative to sub-selects in mysql 3, and such queries cannot have the select fields replaced by count(*) to give good results, it just doesn't work.

Sam

down

pjoe444 at yahoo dot com ¶

20 years ago

Re my last entry:

This seems the best workaround to get an 'ordinary' loop going, with possibility of altering output according to row number
(eg laying out a schedule)

$rowno=mysql_num_rows($result);

for ($i=0; $i<mysql_num_rows($result); $i++) {
$row = mysql_fetch_assoc($result);

print "<div class=\"showing\">";
print "<b>".$row['timeon']."-".$row['timeoff']."</b> ".$row['event']."<br />;
if ($i!=$rowno-1) {
    print "other-html-within-sched-here</div>"; 
    }  
else print "end-last-entry-html-here</div>"; 
}  //close loop

down

aaronp123 att yahoo dott comm ¶

21 years ago

I may indeed be the only one ever to encounter this - however if you have a myisam table with one row, and you search with valid table and column name for a result where you might expect 0 rows, you will not get 0, you will get 1, which is the myisam optimised response when a table has 0 or one rows.  Under "5.2.4 How MySQL Optimises WHERE Clauses" it reads:

*Early detection of invalid constant expressions. MySQL quickly detects that some SELECT statements are impossible and returns no rows. 

and

*All constant tables are read first, before any other tables in the query. A constant table is: 
1) An empty table or a table with 1 row. 
2) A table that is used with a WHERE clause on a UNIQUE index, or a PRIMARY KEY, where all index parts are used with constant expressions and the index parts are defined as NOT NULL. 

Hopefully this will keep someone from staying up all night with 1146 errors, unless I am completely mistaken in thinking I have this figured out.

down

Joebomb ¶

9 years ago

In Reply to the last post: This may not always work correctly, as $object->doesExist would contain a result, not a boolean value. A better way (using the same method) would be using a cast: 

<?php
class Object {
  var $doesExist = false;

  [...]
  function load() {
    $result = mysql_query('...');
    $this->doesExist = (bool) ($res = mysql_fetch_array($result))
    [...]
  }
}
?>

down

philip at cornado dot c()m ¶

23 years ago

Regarding SQL count(), see this faq :

* http://www.faqts.com/knowledge_base/view.phtml/aid/114/fid/12

Note: If you already have a $result, use mysql_num_rows() on it otherwise use SQL count().  Don't SELECT data just for a count.

down

Anonymous ¶

19 years ago

In response to oran at trifeed dot com:

You are only experiencing this behaviour because you have not given your FOUND_ROWS() result an alias:

$qry = mysql_query ( 'SELECT FOUND_ROWS() AS total' );
$rst = mysql_fetch_array ( $qry, MYSQL_ASSOC );
echo $rst['total'];

Sean :)

down

-1

Typer85 at gmail dot com ¶

17 years ago

A note on the following usage; that suggest to use several MySQL Functions to get the number of Table Records.

You may be familiar with following:

<?php

$sqlQuery = 'Select SQL_CALC_FOUND_ROWS `MyField` From `MyTable` Limit 1;'; 

$sqlQuery_1 = 'Select FOUND_ROWS( );';

?>

I omitted the actual connection to MySQL and the execution of the query, but you get the idea.

I did some tests and on a fairly high traffic web site, one that executes several queries quite often and found that using this combination of MySQL Functions can actually result in wrong results.

For example, assume I have two queries to get the number of Table Records in two different Tables. So in essence, we are executing 4 queries ( 2 queries for each Table ).

If two different requests come in through PHP, your going to run into problems. Note than when I mean request, I mean two different clients requesting your PHP page.

---------------
Request 1:
---------------

Execute: SQL_CALC_FOUND_ROWS On Table 1

---------------
Request 2:
---------------

Execute: SQL_CALC_FOUND_ROWS On Table 2

---------------
Request 1:
---------------

Execute: Select FOUND_ROWS( )

At this point, you see the race condition that occurred. While Request 1 was being executed, Request 2 came in.

At this point Request 1 will return the number of Table Records in Table 2 and not Table 1 as expected!

Why? Because MySQL does not differ between requests. Each query is in a queue waiting its turn. As soon as its turn comes in it will be executed my MySQL.

The MySQL Function Select FOUND_ROWS( ) will return the result of the last SQL_CALC_FOUND_ROWS!

Keep in mind.

down

-2

dzver at abv dot bg ¶

19 years ago

It is faster to run second query "select count(...) from ... ", than adding SQL_CALC_FOUND_ROWS to your first query, and then using select FOUND_ROWS() + mysql_num_rows().

down

-3

pjoe444 at yahoo dot com ¶

20 years ago

A pity there seems no way of getting the CURRENT  row number that's under iteration in a typical loop, 
such as:
while ($row = mysql_fetch_assoc($result)) { }

After all there is an array of row arrays, as signified by
mysql_num_rows($result):

Say this gives "40 rows" : it would be useful to know when the iteration is on row 39.

The nearest seems to be "data seek":but it connects directly to a
row number eg (from mysql_data_seek page)

for ($i = mysql_num_rows($result) - 1; $i >= 0; $i--) {
   if (!mysql_data_seek($result, $i)) {
       echo "Cannot seek to row $i: " . mysql_error() . "\n";
       continue;
   }

= it still wouldn't solve knowing what row number you're on in an ordinary loop.

One reason for this situation is the php fetch (fetch-a-single-row) construction, without any reasonable FOR loop possibility with row numbers.

Suggestion:
$Rows[$i] possibility where
$i would be the row number

$Rows[$row[], $row[], $row[].....]
             0            1            2     etc

-- the excellent retrieval WITHIN a row ( $row[$i] ),
while certainly more important,  is not matched by 
similar possibilities for rows themselves.

and Count($result) doesnt work of course, $result being a 
mere ticket-identifier...

Peter T

down

-4

gtaylor at sonic dot net ¶

16 years ago

In preventing the race condition for the SQL_CALC_FOUND_ROWS and FOUND_ROWS() operations, it can become complicated and somewhat kludgy to include the FOUND_ROWS() result in the actual result set, especially for complex queries and/or result ordering. The query gets more complex, you may have trouble isolating/excluding the FOUND_ROWS() result, and mysql_num_rows() will return the number of actual results + 1, all of which makes your code messier and harder to read. However, the race condition is real and must be dealt with.

A alternative and cleaner method is to explicitly lock the table using a WRITE lock (preventing other processes from reading/writing to the table). The downsides I can see are a performance hit, and your mysql user must have lock permissions.

<?php
    // excuse the use of mysqli instead of mysql

    $mysqli->query("LOCK TABLE t WRITE");
    $results = $mysqli->query("SELECT id FROM t LIMIT 0,10");
    $totalNumResults = array_pop($mysqli->query("SELECT FOUND_ROWS()")->fetch_row());
    $mysqli->query("UNLOCK TABLES");
?>

Now you may iterate through the results just like any other result set.

down

-4

oran at trifeed dot com ¶

20 years ago

For me 

SELECT SQL_CALC_FOUND_ROWS together with
SELECT FOUND_ROWS()

Only worked with the following syntax:
$result = @mysql_query($query);
$resultTotal = @mysql_query("SELECT FOUND_ROWS()");
$res=    mysql_fetch_array($resultTotal);
echo $res['FOUND_ROWS()'];

hope it helped

oran
http://www.trifeed.com

down

-3

wil1488 at gmail dot com ¶

19 years ago

To use SQL COUNT function, without select the source...

see an example:

<?
//MAKE THE CONNECTION WITH DATABASE

$my_table = mysql_query("SELECT COUNT(*) as TOTALFOUND from table", $link); //EXECUTE SQL CODE
Note: will return the total on TOTALFOUND

print (mysql_result($my_table,0,"TOTALFOUND")); //use the field camp to get the total from your SQL query!
?>

Thanks, good luck.

down

-4

Typer85 at gmail dot com ¶

14 years ago

Actually I am a little ashamed to be saying this, but I stand corrected about a rather old note I posted on 17-Jul-2007 06:44.

Using SQL_CALC_FOUND_ROWS and FOUND_ROWS( ) will NOT trigger a race condition on MySQL, as that would pretty much defy their entire purpose.

The results for their usage is actually unique per connection session as it is impossible for processes to share anything in PHP. As far as PHP is concerned, each request represents a new connection to MySQL as each request is isolated to its own process.

To simulate this, create the following script:

<?php

$Handle = mysql_connect( "localhost" , "root" , "" );
mysql_select_db( "lls" );

if( isset( $_GET[ 'Sleep' ] ) ) {
    mysql_query( "SELECT SQL_CALC_FOUND_ROWS `bid` From `blocks` Limit 1" );
} else {
    mysql_query( "SELECT SQL_CALC_FOUND_ROWS `aid` From `access` Limit 1" );
}

if( isset( $_GET[ 'Sleep' ] ) ) {
    sleep( 10 ); // Simulate another HTTP request coming in.
    $Result = mysql_query( "SELECT FOUND_ROWS( )" );
    print_r( mysql_fetch_array( $Result ) );
}

mysql_close( );

?>

Set the connection and query information for something that matches your environment.

Run the script once with the Sleep query string and once again without it. Its important to run them both at the same time. Use Apache ab or something similar, or even easier, just open two browser tabs. For example:

http://localhost/Script.php?Sleep=10
http://localhost/Script.php

If a race condition existed, the results of the first instance of the script would equal the results of the second instance of the script.

For example, the second instance of the script will execute the following SQL query:

<?php

mysql_query( "SELECT SQL_CALC_FOUND_ROWS `aid` From `access` Limit 1" );

?>

This happens while the first instance of the script is sleeping. If a race condition existed, when the first instance of the script wakes up, the result of the FOUND_ROWS( ) it executes should be the number of rows in the SQL query the second instance of the script executed.

But when you run them, this is not the case. The first instance of the script returns the number of rows of its OWN query, which is:

<?php

mysql_query( "SELECT SQL_CALC_FOUND_ROWS `bid` From `blocks` Limit 1" );

?>

So it turns out NO race condition exists, and every solution presented to combat this "issue" are pretty much not needed.

Good Luck,

down

-5

tac at smokescreen dot org ¶

22 years ago

MySQL 4.0 supports a fabulous new feature that allows you to get the number of rows that would have been returned if the query did not have a LIMIT clause.  To use it, you need to add SQL_CALC_FOUND_ROWS to the query, e.g.

$sql = "Select SQL_CALC_FOUND_ROWS * from table where state='CA' limit 50";
$result = mysql_query($sql);

$sql = "Select FOUND_ROWS()";
$count_result = mysql_query($sql);

You now have the total number of rows in table that match the criteria.  This is great for knowing the total number of records when browsing through a list.

down

-5

webmaster dasourcerer net ¶

17 years ago

In one of my applications, I had to let an object know wether it exists in the database or not. I found a cheap solution w/o the usage of mysql_num_rows():

<?php
class Object {
  var $doesExist = false;

  [...]
  function load() {
    $result = mysql_query('...');
    $this->doesExist = ($res = mysql_fetch_array($result))
    [...]
  }
}
?>

down

-5

simon_nuttall at hotmail dot com ¶

19 years ago

Object oriented version of wil1488 at gmail dot com's comment for counting table rows:
<?php
$result = $mysqli->query("SELECT COUNT(*) as TOTALFOUND from table");
$row_array=$result->fetch_array(MYSQLI_ASSOC);
print($row_array['TOTALFOUND']); 
?>

down

-5

Tom Fejfar ¶

16 years ago

Improvement to chrisdberry82 at gmail dot com's code:

<?php
$sql = "
SELECT SQL_CALC_FOUND_ROWS 
  '0', z.id
FROM 
  zoom AS z 
LIMIT 
  0,6 
UNION 
  SELECT 
    '1', FOUND_ROWS() 
ORDER BY `0` DESC , RAND()";
?>

You can see, that you can even ORDER the final result anyway you like ;)
Then you can fetch the result like this:
<?php
$res = mysql_query($sql);
$count = mysql_fetch_assoc($res); 
while($row = mysql_fetch_assoc($res)){
 unset($row["0"]); //get rid of the "sorting col"
 print_r($row); //or whatever ;)
}
echo $count["id"]; // the total number of rows
?>

And you got rid of the lousy IFs ;)

＋add a note