Whilst it was correct 11 years ago, the statement of Dan D is not so correct any moreю Anonymous functions are now objects of a class Closure and are safely collected by garbage collector.
(PHP 4 >= 4.0.1, PHP 5, PHP 7)
create_function — 文字列のコードを評価し、動的に関数を作成する
この関数は PHP 7.2.0 で 非推奨 になり、PHP 8.0.0 で 削除 されました。この関数に頼らないことを強く推奨します。
指定したパラメータにより動的に関数を作成し、その関数のユニークな名前を返します。
通常、argsには、シングルクオートで括った文字列 を
指定することが推奨されます。
ダブルクオート を使用した場合には、\$somevarのように変数名を
注意深くエスケープする必要があります。
args関数の引数を、カンマ区切りの文字列で指定します。
code関数のコード。
一意な関数名を表す文字列を返します。
失敗した場合に false を返します。
返される名前には、
印字できない文字("\0")
が含まれているので注意して下さい。
よって、この名前を出力したり、
他の文字列に組み込む場合は特別な注意を払うべきです。
例1 create_function() や無名関数を使い、動的に関数を作成する
(たとえば) 実行時に取得した情報をもとにして関数を作成するために、動的に作成した関数が使えます。まず create_function() を使ってみます:
<?php
$newfunc = create_function('$a,$b', 'return "ln($a) + ln($b) = " . log($a * $b);');
echo $newfunc(2, M_E) . "\n";
?>同じコードは、無名関数 でも実現できます。コードや引数は、文字列に含まれていない点に注意して下さい:
<?php
$newfunc = function($a,$b) { return "ln($a) + ln($b) = " . log($a * $b); };
echo $newfunc(2, M_E) . "\n";
?>上の例の出力は以下となります。
ln(2) + ln(2.718281828459) = 1.6931471805599
例2 create_function() や無名関数を使い、一般的な処理を行う関数を作成する
もしくは、パラメータリストに一連の処理を行うことができる 一般的なハンドラ関数を定義できます:
<?php
function process($var1, $var2, $farr)
{
foreach ($farr as $f) {
echo $f($var1, $var2) . "\n";
}
}
// 数学関数群を作成します
$farr = array(
create_function('$x,$y', 'return "some trig: ".(sin($x) + $x*cos($y));'),
create_function('$x,$y', 'return "a hypotenuse: ".sqrt($x*$x + $y*$y);'),
create_function('$a,$b', 'if ($a >=0) {return "b*a^2 = ".$b*sqrt($a);} else {return false;}'),
create_function('$a,$b', "return \"min(b^2+a, a^2,b) = \".min(\$a*\$a+\$b,\$b*\$b+\$a);"),
create_function('$a,$b', 'if ($a > 0 && $b != 0) {return "ln(a)/b = ".log($a)/$b; } else { return false; }')
);
echo "\nUsing the first array of dynamic functions\n";
echo "parameters: 2.3445, M_PI\n";
process(2.3445, M_PI, $farr);
// 文字列処理関数群を作成します
$garr = array(
create_function('$b,$a', 'if (strncmp($a, $b, 3) == 0) return "** \"$a\" '.
'and \"$b\"\n** Look the same to me! (looking at the first 3 chars)";'),
create_function('$a,$b', 'return "CRCs: " . crc32($a) . ", ".crc32($b);'),
create_function('$a,$b', 'return "similar(a,b) = " . similar_text($a, $b, $p) . "($p%)";')
);
echo "\nUsing the second array of dynamic functions\n";
process("Twas brilling and the slithy toves", "Twas the night", $garr);
?>ここでも、 同じことが 無名関数 で実現できます。 変数名をエスケープする必要がないことに注意して下さい。 なぜなら、文字列に埋め込まれていないからです。
<?php
function process($var1, $var2, $farr)
{
foreach ($farr as $f) {
echo $f($var1, $var2) . "\n";
}
}
// 数学関数群を作成します
$farr = array(
function($x,$y) { return "some trig: ".(sin($x) + $x*cos($y)); },
function($x,$y) { return "a hypotenuse: ".sqrt($x*$x + $y*$y); },
function($a,$b) { if ($a >=0) {return "b*a^2 = ".$b*sqrt($a);} else {return false;} },
function($a,$b) { return "min(b^2+a, a^2,b) = " . min($a*$a+$b, $b*$b+$a); },
function($a,$b) { if ($a > 0 && $b != 0) {return "ln(a)/b = ".log($a)/$b; } else { return false; } }
);
echo "\nUsing the first array of dynamic functions\n";
echo "parameters: 2.3445, M_PI\n";
process(2.3445, M_PI, $farr);
// 文字列処理関数群を作成します
$garr = array(
function($b,$a) { if (strncmp($a, $b, 3) == 0) return "** \"$a\" " .
"and \"$b\"\n** Look the same to me! (looking at the first 3 chars)"; },
function($a,$b) { return "CRCs: " . crc32($a) . ", ".crc32($b); },
function($a,$b) { return "similar(a,b) = " . similar_text($a, $b, $p) . "($p%)"; }
);
echo "\nUsing the second array of dynamic functions\n";
process("Twas brilling and the slithy toves", "Twas the night", $garr);
?>上の例の出力は以下となります。
Using the first array of dynamic functions parameters: 2.3445, M_PI some trig: -1.6291725057799 a hypotenuse: 3.9199852871011 b*a^2 = 4.8103313314525 min(b^2+a, a^2,b) = 8.6382729035898 ln(a)/b = 0.27122299212594 Using the second array of dynamic functions ** "Twas the night" and "Twas brilling and the slithy toves" ** Look the same to me! (looking at the first 3 chars) CRCs: 3569586014, 342550513 similar(a,b) = 11(45.833333333333%)
例3 動的な関数をコールバック関数として使う
おそらく、動的な関数のもっとも一般的な用途は、コールバックに渡すことでしょう。 たとえば array_walk() あるいは usort() などで使用します。
<?php
$av = array("the ", "a ", "that ", "this ");
array_walk($av, create_function('&$v,$k', '$v = $v . "mango";'));
print_r($av);
?>無名関数 を使うと、下記のようになります:
<?php
$av = array("the ", "a ", "that ", "this ");
array_walk($av, function(&$v,$k) { $v = $v . "mango"; });
print_r($av);
?>上の例の出力は以下となります。
Array ( [0] => the mango [1] => a mango [2] => that mango [3] => this mango )
create_function() を使い、文字列を長いものから短いものに並べます:
<?php
$sv = array("small", "a big string", "larger", "it is a string thing");
echo "Original:\n";
print_r($sv);
echo "Sorted:\n";
usort($sv, create_function('$a,$b','return strlen($b) - strlen($a);'));
print_r($sv);
?>無名関数 を使うと、下記のようになります:
<?php
$sv = array("small", "a big string", "larger", "it is a string thing");
echo "Original:\n";
print_r($sv);
echo "Sorted:\n";
usort($sv, function($a,$b) { return strlen($b) - strlen($a); });
print_r($sv);
?>上の例の出力は以下となります。
Original: Array ( [0] => small [1] => a big string [2] => larger [3] => it is a string thing ) Sorted: Array ( [0] => it is a string thing [1] => a big string [2] => larger [3] => small )
Whilst it was correct 11 years ago, the statement of Dan D is not so correct any moreю Anonymous functions are now objects of a class Closure and are safely collected by garbage collector.Beware when using anonymous functions in PHP as you would in languages like Python, Ruby, Lisp or Javascript. As was stated previously, the allocated memory is never released; they are not objects in PHP -- they are just dynamically named global functions -- so they don't have scope and are not subject to garbage collection.
So, if you're developing anything remotely reusable (OO or otherwise), I would avoid them like the plague. They're slow, inefficient and there's no telling if your implementation will end up in a large loop. Mine ended up in an iteration over ~1 million records and quickly exhasted my 500MB-per-process limit.In regards to the recursion issue by info at adaniels dot nl
Anon function recursion by referencing the function variable in the correct scope.
<?php
$fn2 = create_function('$a', 'echo $a; if ($a < 10) call_user_func($GLOBALS["fn2"], ++$a);');
$fn2(1);
?>Try this to boost performance of your scripts (increase maxCacheSize):
<?php
runkit_function_copy('create_function', 'create_function_native');
runkit_function_redefine('create_function', '$arg,$body', 'return __create_function($arg,$body);');
function __create_function($arg, $body) {
static $cache = array();
static $maxCacheSize = 64;
static $sorter;
if ($sorter === NULL) {
$sorter = function($a, $b) {
if ($a->hits == $b->hits) {
return 0;
}
return ($a->hits < $b->hits) ? 1 : -1;
};
}
$crc = crc32($arg . "\\x00" . $body);
if (isset($cache[$crc])) {
++$cache[$crc][1];
return $cache[$crc][0];
}
if (sizeof($cache) >= $maxCacheSize) {
uasort($cache, $sorter);
array_pop($cache);
}
$cache[$crc] = array($cb = eval('return function('.$arg.'){'.$body.'};'), 0);
return $cb;
}
?>In the process of migrating a PHP4 codebase to PHP5, I ran into a peculiar problem. In the library, every class was derived from a generic class called 'class_container'. 'class_container' contained an array called runtime_functions and a method called class_function that was as follows:
<?php
function class_function($name,$params,$code) {
$this->runtime_functions[$name] = create_function($params,$code);
}
?>
In a subclass of class_container, there was a function that utilized class_function() to store some custom lambda functions that were self-referential:
<?php
function myfunc($name,$code) {
$this->class_function($name,'$theobj','$this=&$theobj;'.$code);
}
?>
In PHP4, this worked just fine. The idea was to write blocks of code at the subclass level, such as "echo $this->id;", then simply $MYOBJ->myfunc("go","echo $this->id;"); and later call it like $MYOBJ->runtime_functions["go"]();
It essentially worked exactly like binding anonymous functions to objects in Javascript.
Note how the "$this" keyword had to be manually redefined for the $code block to work.
In PHP5, however, you can't redeclare $this without getting a fatal error, so the code had to be updated to:
<?php
function myfunc($name,$code) {
$this->class_function($name,'$this',$code);
}
?>
Apparently create_function() allows you to set $this via a function argument, allowing you to bind anonymous functions to instantiated objects. Thought it might be useful to somebody.Note that using __FUNCTION__ in a an anonymous function, will always result '__lambda_func'.
<?php
$fn = create_function('', 'echo __FUNCTION__;');
$fn();
// Result: __lambda_func
echo $fn;
// Result: ºlambda_2 (the actual first character cannot be displayed)
?>
This means that a anonymous function can't be used recursively. The following code (recursively counting to 10) results in an error:
<?php
$fn2 = create_function('$a', 'echo $a; if ($a < 10) call_user_func(__FUNCTION__, $a++);');
$fn2(1);
// Warning: call_user_func(__lambda_func) [function.call-user-func]: First argument is expected to be a valid callback in T:/test/test.php(21) : runtime-created function on line 1
?>[EDIT by danbrown AT php DOT net: Combined user-corrected post with previous (incorrect) post.]
You can't refer to a class variable from an anonymous function inside a class method using $this. Anonymous functions don't inherit the method scope. You'll have to do this:
<?php
class AnyClass {
var $classVar = 'some regular expression pattern';
function classMethod() {
$_anonymFunc = create_function( '$arg1, $arg2', 'if ( eregi($arg2, $arg1) ) { return true; } else { return false; } ' );
$willWork = $_anonymFunc('some string', $classVar);
}
}
?>The following function is very useful for creating an alias of a user function.
For built-in functions, it is less useful because default values are not available, so function aliases for built-in functions must have all parameters supplied, whether optional or not.
<?php
function create_function_alias($function_name, $alias_name)
{
if(function_exists($alias_name))
return false;
$rf = new ReflectionFunction($function_name);
$fproto = $alias_name.'(';
$fcall = $function_name.'(';
$need_comma = false;
foreach($rf->getParameters() as $param)
{
if($need_comma)
{
$fproto .= ',';
$fcall .= ',';
}
$fproto .= '$'.$param->getName();
$fcall .= '$'.$param->getName();
if($param->isOptional() && $param->isDefaultValueAvailable())
{
$val = $param->getDefaultValue();
if(is_string($val))
$val = "'$val'";
$fproto .= ' = '.$val;
}
$need_comma = true;
}
$fproto .= ')';
$fcall .= ')';
$f = "function $fproto".PHP_EOL;
$f .= '{return '.$fcall.';}';
eval($f);
return true;
}
?>For who *really* needs the create_function() on php8 (because of legacy code that cannot be changed easily) there is this: "composer require lombax85/create_function".Best wapper:
<?php
function create_lambda($args, $code) {
static $func;
if (!isset($func[$args][$code])) {
$func[$args][$code] = create_function($args, $code);
}
return $func[$args][$code];
}In response to kkaiser at revolution-records dot net's note, even tho PHP will allow you to use
<?
$myfunc = create_function('$this', $code);
?>
You can NOT use a reference to "$this" inside of the anonymous function, as PHP will complain that you are using a reference to "$this" in a non-object context.
Currently, I have not found a work-around for this...$f = create_function('','echo "function defined by create_function";');
$f();
result:
function defined by create_function
You may define no return in function body while you are using create_function.Here has been some discussion about the "memory leak" create_function() can create.
What create_function() actually does, is creating an ordinary function with name chr(0).lambda_n where n is some number:
<?php
$f = create_function('', 'return 1;');
function lambda_1() { return 2; }
$g = "lambda_1";
echo $g(); // outputs: 2
$h = chr(0)."lambda_1";
echo $h(); // outputs: 1
?>Here's how to call a runtime-created function from another runtime-created function:
<?php
$get_func = create_function('$func', 'return substr($func,1);');
$get_value = create_function('$index','return pow($index,$index);');
$another_func = create_function('$a', '$func="\x00"."'.$get_func($get_value).'";return $func($a);');
echo $another_func(2); # result is 4
?>In reply to info at adaniels dot nl:
You may not be able to use __FUNCTION__ in a lambda (thanks for pointing it out; I was having that problem just now), but you can use $GLOBALS to work around it if you're assigning the function to a variable. I reimplemented array_walk_recursive() in PHP4 like this:
<?php
$array_walk_recursive = create_function('&$array, $callback',
'foreach($array as $element) {
if(is_array($element)) {
$funky = $GLOBALS["array_walk_recursive"];
$funky($element, $callback);
}
else {
$callback($element);
}
}');
?>Beware! This is merely a convenience function that generates a unique name for a regular function. It is *not* a closure or even an anonymous function. It is just a regular function that gets named for you.Functions created by create_function() cannot return a value by reference. The function below creates a function that can. The arguments are the same as create_function(). Note that these arguments are passed, unmodified, to eval(), so be sure that data passed in is sanitized.
<?php
/**
* create_ref_function
* Create an anonymous (lambda-style) function
* which returns a reference
* see http://php.net/create_function
*/
function
create_ref_function( $args, $code )
{
static $n = 0;
$functionName = sprintf('ref_lambda_%d',++$n);
$declaration = sprintf('function &%s(%s) {%s}',$functionName,$args,$body);
eval($declaration);
return $functionName;
}
?>If you were checking to see if a function is made properly, this would be a better way of checking:
<?php
$fnc = @create_function('$arg1,$arg2,$arg3', 'return true;');
# make that function whatever you want
if (empty($fnc)) {
die('Could not create function $fnc.');
}
# although, the follow will NOT work
if (empty(create_function('$arg', 'return $arg;'))) {
die('Could not create anonymous function.');
}
# you would get an error regarding not being able to use a
# return value in writeable context (i.e. a return value is
# a const in C, and the function empty() doesn't use a
# const void* parameter
?>neo at gothic-chat d0t de wrote :
Beware of memory-leaks, the garbage-collection seems to 'oversee' dynamically created functions!
Not really...
In fact, PHP can not "unassign" functions. So if you create a function, it won't be deleted until the end of the script, even if you unset the variable containing its name.
If you need to change a part of a function everytime you run a loop, think of a way to make a more general function or try using eval :) (functions are made to be re-used. If you need to run your own piece of code once, eval is much better).Just a little toy I thought up, I would like to share. Creates an anonymous function, which let you use a class as a function.
In php 5.3 there is support for real functors (trough __invoke):
<?php
function createFunctor($className){
$content = "
static \$class;
if(!\$class){
\$class = new $className;
}
return \$class->run(\$args);
";
$f = create_function('$args', $content);
return $f;
}
class test {
public function run($args){
print $args;
}
}
$test = createFunctor('test');
$test('hello world');
?>Beware of memory-leaks, the garbage-collection seems to 'oversee' dynamically created functions!
I used a function like this to replace special characters in links with their htmlentities:
<?php
$text = preg_replace_callback (
"/(<(frame src|a href|form action)=\")([^\"]+)(\"[^>]*>)/i",
create_function (
'$matches',
'return $matches[1] . htmlentities ($matches[3]) . $matches[4];'
),
$text);
?>
After 1000 calls, the process used about 5MB more than before. In my situation this boosted up the memory-size of one PHP-process up to over 100MB!
In such cases, better store the function in a global variable.Create_function enables the ability to change the scope of functions. You might have a class where it needs to define a GLOBAL function. This is possible, like:
<?php
class blah {
function blah() {
$z=create_function('$arg1string','return "function-z-".$arg1string;');
$GLOBALS['z']=$z;
}
}
$blah_object=new blah;
$result=$GLOBALS['z']('Argument 1 String');
echo $result;
?>
Making a function escape it's defined scope can be useful in many situations.