PHP Conference Nagoya 2025

    SSH2 関数

    目次

    Found A Problem?

    Learn How To Improve This Page • Submit a Pull Request • Report a Bug
    ＋add a note

    User Contributed Notes 8 notes

    up
    9
    dan at novapulsar dot com
    17 years ago
    you will have an issue transferring any file using ssh2_scp_send unless you send a dummy file after your real file, or preferably issue an

    ssh2_exec ($connection, 'exit');

    I was transferring hundreds of thousands of files in my prototype across multiple servers, and noticed that each file had a mismatched md5 hash and bytelength.

    after a bit of research i learnt that this was a bug, and added the code above as suggested at pecl.php.net in the bugs section.

    hopefully this helps someone who is getting partial file transfer that could ruin your whole app.
    up
    3
    astribuncio at gmail dot com
    18 years ago
    Installing on HPUX 11.11 cookbook

    Just follow the install instructions on the man page and solved the problems as they appear

    - when making libssh2
    Problem related with /lib/pa20_64 and 64 bits library in 32 bits link
    Edited the configure file and changed
    SHLIB_LDFLAGS="-b +vnocompatwarnings -L/lib/pa20_64"
    to
    SHLIB_LDFLAGS="-b +vnocompatwarnings -L/lib"

    -when executing phpize
    Problems with aclocal, autom4ke and m4
    Installed automake, autoconf and m4

    -when ./configuring the ssh2
    Configure: error: libssh2 version >= 0.4 not found
    Edited the configure.m4 and removed the -ldl switch from line (as posted before)
    39 -L$SSH2_DIR/lib -lm -ldl
    runned phpize again and ./configure --with-ssh2
    up
    3
    shred
    7 years ago
    Getting strange "Unable to open ssh2.sftp://Resource id #3/example.txt" errors? This is a bug in PHP > 5.6.27. Use intval() as a workaround to make ssh2 work again:

    $sftp = ssh2_sftp($connection);
    fopen("ssh2.sftp://" . intval($sftp) . "/example.txt", 'r');

    https://bugs.php.net/bug.php?id=73597
    up
    2
    chris dot britton at cingular dot com
    18 years ago
    I was building out the ssh2 extension (0.10) under OpenBSD 3.9 on sparc64 and I got this error when running configure:

    checking for libssh2_banner_set in -lssh2... no
    configure: error: libssh2 version >= 0.4 not found

    I did some poking around in the configure file and traced the problem down. The reason for the failure is that configure is trying to compile a test program with -ldl. libdl is not installed on OpenBSD 3.9. The OpenBSD folks purged libdl years ago and I could not find a package that contains it.

    (The error message above is misleading because the problem is not with libssh2.)

    I looked at the ssh2 extension code and could not see a reason for using libdl, so I removed the -ldl from the config.m4 file. Re-ran phpize and configure. No errors. Did make and installed ssh2.so. Works fine.
    up
    2
    Mike <esnik8202 at sneakemail dot com>
    18 years ago
    To list directory contents:

    <?php
    $connection     = ssh2_connect(\"hostname\", 22);
    ssh2_auth_password(    $connection,\"username\", \"password\"); // or use any of the ssh2_auth_* methods
    $sftp = ssh2_sftp($connection);

    $dh = opendir(\"ssh2.sftp://$sftp/path/to/dir/\");

    while ((    $file = readdir($dh)) !== false) {
    echo \"    $file is in hostname:/path/to/dir\\n\";
    }

    closedir(    $dh);
    ?>

    (thanks to Sara for assisting)
    up
    1
    dotwho at NSPM dot mac dot com
    19 years ago
    Trying to compile this ssh PECL extension for Mac OS X (10.4.2)
    with entropy.ch's php5 distribution? Read on: PART 1:
    1) Download libssh (I used version 0.11)
    http://sourceforge.net/project/showfiles.php?group_id=125852
    2) Unzip the directory and cd to the upacked directory in the terminal.
    3) run: ./configure; make all install;
    libssh should compile and place the output file in src/*.o
    4) copy all headers from the include folder within the libssh2 directory to
    /usr/local/include/
    5) copy all compiled files (*.o) from the src folder within the libssh2
    directory to /usr/local/lib/
    6) Download ssh2
    (I used version 0.9 with additional changes from cvs - explained below)
    http://pecl.php.net/package/ssh2
    7) unzip the downloaded archive.
    8) version 0.9 has a conflict with an existing symbol used in some of the ZEND headers...
    a change is available in cvs which renames the symbol in ssh2 to avoid the conflict
    http://cvs.php.net/diff.php/pecl/ssh2/ssh2.c?r1=1.9&r2=1.10&ty=h
    down load at least the 1.10 version of ssh2.c
    if you decide to download a newer version, download any of the corresponding related files,
    such as the php_ssh2.h header file.
    9) replace the old version of ssh2.c with the new version of ssh2.c
    (and any other files you downloaded).
    10) From the terminal:
    cd to the source directory (for me ssh2-0.9/ssh2-0.9/).

    (Continued in a PART 2 comment)
    up
    0
    dotwho at NSPM dot mac dot com
    19 years ago
    Trying to compile this ssh PECL extension for Mac OS X (10.4.2)
    with entropy.ch's php5 distribution? Read on: PART 2:

    11) Check your shell's path variable by SHELL$ "echo $PATH".
    If your php5 binary directory is not listed before the standard OS X binary directory,
    update your $PATH variable to list it first. Mine reads:
    /usr/local/mysql/bin/: /usr/local/php5/bin/: /bin:/sbin: /usr/bin:/usr/sbin
    11a) if you do not do this step, the PECL extension will link against the old
    php4 version that ships with Mac OS X. You will know this by the fact that the
    next step lists a server API that is different than the output of phpinfo():
    My version was 20041030, Apples version was 20020429.
    12) Run: phpize && ./configure --with-ssh2 && make
    This will produce a lot of output and probably some warnings. If you get a note
    at the end that says "Build Complete", then the process has completed
    (probably successfully). The command has produced the output file ssh2.so within
    the ssh2-0.9 (or whatever version) directory.
    13) Check where the extension directory is located at by running the following command:
    SHELL$/usr/local/php5/bin/php-config --extension-dir
    If it lists some directory that actually exists, copy the ssh2.so file to this directory.
    If it doesn't list a location that exists, you can either create the location, or
    choose a different location and update the line in your php.ini file:
    extension_dir = "./"
    to point to the directory you would like to use. I chose:
    extension_dir = "/usr/local/php5/extensions/"?>
    14) Add the line
    extension=ssh2.so
    to the Dynamic Extensions area of your php.ini file.
    15) Restart your web server for the extensioin to be loaded. If there are any problems, they will be written to the webserver log.
    16) Check if your new ssh based streams are available by running:
    SHELL$ /usr/local/php5/bin/php -r "print_r(stream_get_wrappers());"
    You should get something similar to this output:
    Array
    (
    [0] => php
    [1] => file
    [2] => http
    [3] => ftp
    [4] => compress.bzip2
    [5] => compress.zlib
    [6] => https
    [7] => ftps
    [8] => ssh2.shell
    [9] => ssh2.exec
    [10] => ssh2.tunnel
    [11] => ssh2.scp
    [12] => ssh2.sftp
    )
    You should now be able to do all the cool things you need to do with ssh
    (like sftp scp ssh execution)! Take a look at some of the comment here for some
    example scripts to test things out:
    http://us2.php.net/manual/en/ref.ssh2.php

    Good luck... hope that saves you my headache! :)
    up
    -1
    aeolianmeson at blitzeclipse dot com
    17 years ago
    Some installations of PHP 5 may have a problem starting the SSH2 extension as a Windows' service. It just started happening to me today, spontaneously. I have PHP 5.2.2 (and have tried 5.2.3), on Apache 2.0.59 .

    It turns out that it's an Apache problem. Even though I was given an error message when starting it, it still worked perfectly from the CLI. So, I commented it out in the
    INI file again, and am just loading it using extension_loaded('ssh2') and dl('php_ssh2.dll') from within the script.
    ＋add a note
    To Top