gzopen

(PHP 4, PHP 5, PHP 7, PHP 8)

gzopen — Abre arquivo gz

Descrição

gzopen(string $filename, string $mode, int $use_include_path = 0): resource|false

Abre um arquivo gzip (.gz) para leitura ou escrita.

gzopen() pode ser usado para ler um arquivo que não está no formato gzip; nesse caso, gzread() lerá diretamente do arquivo sem descompressão.

Parâmetros

filename: O nome do arquivo.
mode: Como em fopen() (rb ou wb) mas também pode incluir um nível de compressão (wb9) ou uma estratégia: f para dados filtrados como em wb6f, h para compressão Huffman como em wb1h. (Consulte a descrição de deflateInit2 em zlib.h para mais informações sobre o parâmetro de estratégia.)
use_include_path: Você pode definir este parâmetro opcional como 1, se você quer procurar o arquivo no include_path também.

Valor Retornado

Retorna um ponteiro de arquivo para o arquivo aberto, depois disso, tudo o que você lê deste descritor de arquivo será descomprimido de forma transparente e o que você escreve será comprimido.

Se a abertura falhar, a função retorna false.

Exemplos

Exemplo #1 Exemplo de gzopen()

<?php
$fp = gzopen("/tmp/arquivo.gz", "r");
?>

Veja Também

gzclose() - Fecha um ponteiro para um arquivo-gz

Melhore Esta Página

Aprenda Como Melhorar Esta Página • Envie uma Solicitação de Modificação • Reporte um Problema

＋adicione uma nota

Notas Enviadas por Usuários (em inglês) 9 notes

down

David Gero dave at havidave dot com ¶

13 years ago

gzopen("php://output","wb") doesn't work on a web server, nor does fopen("compress.zlib://php://output","wb").

Here is a snippet to gzip a file and output it on the fly, without using a temporary file, without reading the file into memory, and without reading the file more than once:

<?php
$fin = fopen($file, "rb");
if ($fin !== FALSE) {
    $fout = fopen("php://output", "wb");
    if ($fout !== FALSE) {
    // write gzip header
    fwrite($fout, "\x1F\x8B\x08\x08".pack("V", filemtime($file))."\0\xFF", 10);
    // write the original file name
    $oname = str_replace("\0", "", basename($file));
    fwrite($fout, $oname."\0", 1+strlen($oname));
    // add the deflate filter using default compression level
    $fltr = stream_filter_append($fout, "zlib.deflate", STREAM_FILTER_WRITE, -1);
    // set up the CRC32 hashing context
    $hctx = hash_init("crc32b");
    // turn off the time limit
    if (!ini_get("safe_mode")) set_time_limit(0);
    $con = TRUE;
    $fsize = 0;
    while (($con !== FALSE) && !feof($fin)) {
        // deflate works best with buffers >32K
        $con = fread($fin, 64 * 1024);
        if ($con !== FALSE) {
        hash_update($hctx, $con);
        $clen = strlen($con);
        $fsize += $clen;
        fwrite($fout, $con, $clen);
        }
    }
    // remove the deflate filter
    stream_filter_remove($fltr);
    // write the CRC32 value
    // hash_final is a string, not an integer
    $crc = hash_final($hctx, TRUE);
    // need to reverse the hash_final string so it's little endian
    fwrite($fout, $crc[3].$crc[2].$crc[1].$crc[0], 4);
    // write the original uncompressed file size
    fwrite($fout, pack("V", $fsize), 4);
    fclose($fout);
    }
    fclose($fin);
}
?>

down

katzlbtjunk at hotmail dot com ¶

16 years ago

WARNING gzopen and gzread have a major disadvantage. They makes NO checksum and NO length verification of the gzipped data and discard this valuable information. This should be documented here.

down

dj8 at joesvolcano dot net ¶

9 years ago

An OO-version of David Gero's excellent GZ File format note also on this page:

<?php

// David Gero's example: read a file and output GZ
$gz_to_out = new GZTempFile(basename($file), "php://output");
$fin = fopen($file, "rb");
while($data = fread($fin, 64 * 1024)) {
    $gz_to_out->fwrite();
}
close($fin);
$gz_to_out->flushBuffer();

// Example of building your GZ file content on the fly (temp filehandle)
$gz_custom = new GZTempFile();
foreach ( ... ) {
    //  Some work
    $str = ...

    $gz_custom->fwrite($str);
}
//  Store it in a database
$m = new MongoClient();
$gridfs = $m->selectDB('test')->getGridFS();
$id = $gridfs->storeFile($gz_custom->getReadFilehandle(), array('contentType' => 'application/x-gzip'));

class GZTempFile {
    private $__fh = null;
    public $uncompressed_bytes = 0;
    public $filesize = null;
    private $gz_filter = null;
    private $file_hash = null;
    private $final_read_fh = false;
    private $__buffer = '';
    private $__buffer_len = 0;

    public function __construct($filename = 'data', $fh = null) {
        $this->__fh = is_null($fh) ? fopen('php://temp','w+') : $fh;
        fwrite($this->__fh, "\x1F\x8B\x08\x08".pack("V", time())."\0\xFF", 10); // GZ file header
        fwrite($this->__fh, str_replace("\0", "", basename($filename)) ."\0");  // GZ filename = data, needed???
        $this->gz_filter = stream_filter_append($this->__fh, "zlib.deflate", STREAM_FILTER_WRITE, -1);
        $this->uncompressed_bytes = 0;
        $this->file_hash = hash_init("crc32b");
    }

    public function fwrite($str,$length = null) {
        if ( $this->final_read_fh ) { throw new Exception("GZTempFile has already been finalized and closed.  No more writing"); }
        hash_update($this->file_hash, $str);
        $this->uncompressed_bytes += strlen($str);
        $this->__buffer_len += strlen($str);
        $this->__buffer .= $str;
        if ( $this->__buffer_len >= 64 * 1024 ) { $this->flushBuffer(); }
    }
    public function flushBuffer() {
        if ( $this->__buffer_len == 0 ) { return false; }
        $return = fwrite($this->__fh, $this->__buffer);
        $this->__buffer_len = 0;
        $this->__buffer = '';
        return $return;
    }

    public function getReadFilehandle() {        
        if ( ! $this->final_read_fh ) {
            $this->flushBuffer();
            stream_filter_remove($this->gz_filter);
            $crc = hash_final($this->file_hash, TRUE);            // hash_final is a string, not an integer
            fwrite($this->__fh, $crc[3].$crc[2].$crc[1].$crc[0]); // need to reverse the hash_final string so it's little endian
            fwrite($this->__fh, pack("V", $this->uncompressed_bytes), 4);

            $this->filesize = ftell($this->__fh);
            rewind($this->__fh);
            $this->final_read_fh = $this->__fh;
        }
        return $this->final_read_fh;
    }
}

down

chasjfish at gmail dot com ¶

5 years ago

There is an active feature request for an xzopen function. The xz program uses the LZMA algorithm for much higher compression ratios than gzip.

Until such time that xzopen might be available, here is my best design for safely reading .xz files which originate remotely and are not trusted.

Below is a CSV log viewer - there is a lot going on here, so I will explain it below:

<?

$PRG_NAME = basename($_SERVER['PHP_SELF'], '.php');
$PRG_LEN = strlen($PRG_NAME);

if(substr($z = $_GET['CSV'], 0, $PRG_LEN) == $PRG_NAME)
{
 header('content-type:application/csv;charset=UTF-8');
 header('Content-Disposition:attachment;filename="' .
   $_GET['CSV'] . '.csv"');

 if('.xz' == substr($z, -3))
 {
        $tmpfname = tempnam("/tmp", "php-log-viewer");
        $fpx = fopen($tmpfname, 'w');
        fprintf($fpx, "/var/app/log/%s\0", $z);
        fclose($fpx);

        $fp = popen("xz -cd --files0=" . $tmpfname, 'r');
 }
 else   $fp = fopen('/var/app/log/' . $z, 'r');

 while($line = fgets($fp))
  echo '"' . preg_replace('/[~]/', '","', rtrim($line)) . "\"\n";

 fclose($fp); if(is_file($tmpfname)) unlink($tmpfname); exit;
}

?>

The logs are tilde-delimited files (~) in the /var/app/log directory which the code above converts to CSV and injects into Excel. They are regularly compressed by cron, but the latest logs will be uncompressed text files. A separate section of my code (not included here) presents them via opendir()/readdir()/stat().

The file prefix that the viewer will allow the user to see is determined by the name of the script - if I name it FTP-LOG.php, then any file beginning with /var/app/log/FTP-LOG can be read. I am enabling the viewer for different prefixes by making hard links to the script.

Since the log might not (yet) be compressed, I check the extension - if .xz is detected, then the gymnastics begin.

It is not safe to pass form content from remote users to a UNIX shell, and I am trying to avoid this. Fortunately, xz has the --files and --files0 options, and I create a temporary filename, record the file of interest in it, then open an xz process for reading (otherwise, a simple fopen() will suffice). Recording a \0 allows safer processing of files with embedded newlines (which is allowed by POSIX), and is immediately familiar to fans of "find -print0" and "xargs -0".

Unfortunately, neither bzip2 nor lzip have have a --files[0] option. It is quite useful in this case, and appears to improve security.

down

rob at digital-crocus dot com ¶

19 years ago

dtorop932 at hotmail dot com's comments, according to my tests, is incorrect. That code wishes to download the entire file before parsing, which is inconvinient. The wget method works though.

down

pentek_imre at mailbox dot hu ¶

19 years ago

Be aware that when opening a remote file on a http server the gzopen will return by default false after 120 seconds waiting to any answer.

down

-2

dtorop932 at hotmail dot com ¶

20 years ago

RE dubious's comment: "Being able to read gzip streams from ftp and http is near the top of my personal wishlist at the moment..."

One way to read a gzip stream over http is to daisychain stream wrappers, e.g.:

<?
$fp = fopen("compress.zlib://http://some.website.org/example.gz", "r");
?>

down

-4

-delete-this-part-dubious at 2xtreme dot net ¶

22 years ago

"On the fly" gunzipping actually DOES seem to work - it just appears that only LOCAL streams/files (including php://stdin) can be accessed for some reason.  I THINK (but have not yet tested) that you could similarly gzopen "php://stdout" and pass a stream of gzipped data to the browser (when run from a web page) or console (when run standalone) through there.

I HAVE tested scripts from the command line like:

wget -q -O- ftp://some.host.net/pub/some_gzip_file.gz | php gunzip_stuff.php

where gunzip_stuff.php would be a script that gzopened "php://stdin" and did gzgets from that stream, and it seems to work fine, but that obviously doesn't help someone wanting to grab gzipped streams from remote sites from a web-based script.

Being able to read gzip streams from ftp and http is near the top of my personal wishlist at the moment...

down

-3

plasma ¶

16 years ago

This worked unstable for me under high load (50+ files per second):

<?php
    $gz = gzopen ( $file, 'w9' );
    gzwrite ( $gz, $content );
    gzclose ( $gz );
?>

The following works fine:

<?php
    $f = fopen ( $file, 'w' );
    fwrite ( $f, gzcompress ( $content, 9 ) );
    fclose ( $f );
?>

＋adicione uma nota