Params with null value do not present in result string.
<?php
$arr = array('test' => null, 'test2' => 1);
echo http_build_query($arr);
?>
will produce:
test2=1
(PHP 5, PHP 7, PHP 8)
http_build_query — Генерирует URL-кодированную строку запроса
$data,$numeric_prefix = "",$arg_separator = null,$encoding_type = PHP_QUERY_RFC1738Генерирует URL-кодированную строку запроса из предоставленного ассоциативного (или индексированного) массива.
dataМожет быть массив или объект, содержащий свойства.
Если data массив, то он может быть
простой одномерной структурой или массивом массивов (который, в свою очередь,
может содержать другие массивы).
Если data объект, тогда только общедоступные
свойства будут включены в результат.
numeric_prefixЕсли числовые индексы используются в базовом массиве и этот параметр указан, то он будет добавлен к числовому индексу для элементов только в базовом массиве.
Это позволяет обеспечить допустимые имена переменных, в которые позже данные будут декодированы PHP или другим CGI-приложением.
arg_separator
Разделитель аргументов. Если не задан или null, то для разделения аргументов
используется arg_separator.output.
encoding_type
По умолчанию PHP_QUERY_RFC1738.
Если encoding_type равен PHP_QUERY_RFC1738,
тогда кодирование осуществляется по » RFC 1738
и типу контента application/x-www-form-urlencoded, что
подразумевает, что пробелы кодируются как символы "плюс" (+).
Если enc_type равен PHP_QUERY_RFC3986,
тогда кодирование осуществляется в соответствии с
» RFC 3986,
а пробелы будут закодированы в процентах (%20).
Возвращает URL-кодированную строку.
| Версия | Описание |
|---|---|
| 8.0.0 |
Параметр arg_separator теперь допускает значение null.
|
Пример #1 Простой пример использования http_build_query()
<?php
$data = array(
'foo' => 'bar',
'baz' => 'boom',
'cow' => 'milk',
'null' => null,
'php' => 'hypertext processor'
);
echo http_build_query($data) . "\n";
echo http_build_query($data, '', '&');
?>Результат выполнения приведённого примера:
foo=bar&baz=boom&cow=milk&php=hypertext+processor foo=bar&baz=boom&cow=milk&php=hypertext+processor
Пример #2 Пример использования http_build_query() с числовыми индексами элементов.
<?php
$data = array('foo', 'bar', 'baz', null, 'boom', 'cow' => 'milk', 'php' => 'hypertext processor');
echo http_build_query($data) . "\n";
echo http_build_query($data, 'myvar_');
?>Результат выполнения приведённого примера:
0=foo&1=bar&2=baz&4=boom&cow=milk&php=hypertext+processor myvar_0=foo&myvar_1=bar&myvar_2=baz&myvar_4=boom&cow=milk&php=hypertext+processor
Пример #3 Пример использования http_build_query() с многомерными массивами
<?php
$data = array(
'user' => array(
'name' => 'Bob Smith',
'age' => 47,
'sex' => 'M',
'dob' => '5/12/1956'
),
'pastimes' => array('golf', 'opera', 'poker', 'rap'),
'children' => array(
'bobby' => array('age'=>12, 'sex'=>'M'),
'sally' => array('age'=>8, 'sex'=>'F')
),
'CEO'
);
echo http_build_query($data, 'flags_');
?>Результат выполнения данных примеров: (символы перенесены для удобства чтения)
user%5Bname%5D=Bob+Smith&user%5Bage%5D=47&user%5Bsex%5D=M& user%5Bdob%5D=5%2F12%2F1956&pastimes%5B0%5D=golf&pastimes%5B1%5D=opera& pastimes%5B2%5D=poker&pastimes%5B3%5D=rap&children%5Bbobby%5D%5Bage%5D=12& children%5Bbobby%5D%5Bsex%5D=M&children%5Bsally%5D%5Bage%5D=8& children%5Bsally%5D%5Bsex%5D=F&flags_0=CEO
Замечание:
Только числовой индексированный элемент "CEO" в базовом массиве получил префикс. Другие числовые индексы, найденные в pastimes, не требуют строкового префикса, чтобы быть допустимыми именами переменных.
Пример #4 Пример использования http_build_query() с объектом
<?php
class parentClass {
public $pub = 'publicParent';
protected $prot = 'protectedParent';
private $priv = 'privateParent';
public $pub_bar = null;
protected $prot_bar = null;
private $priv_bar = null;
public function __construct(){
$this->pub_bar = new childClass();
$this->prot_bar = new childClass();
$this->priv_bar = new childClass();
}
}
class childClass {
public $pub = 'publicChild';
protected $prot = 'protectedChild';
private $priv = 'privateChild';
}
$parent = new parentClass();
echo http_build_query($parent);
?>Результат выполнения приведённого примера:
pub=publicParent&pub_bar%5Bpub%5D=publicChild
Params with null value do not present in result string.
<?php
$arr = array('test' => null, 'test2' => 1);
echo http_build_query($arr);
?>
will produce:
test2=1Passing null to $arg_separator is the same as passing an empty string, which is probably not what you want.
If you need to change the enc_type, use this:
http_build_query($query, null, '&', PHP_QUERY_RFC3986);
Or possibly this:
http_build_query($query, null, ini_get('arg_separator.output'), PHP_QUERY_RFC3986);
But not this:
// BAD CODE!
http_build_query($query, null, null, PHP_QUERY_RFC3986);This function makes like this
files[0]=1&files[1]=2&...
To do it like this:
files[]=1&files[]=2&...
Do this:
$query = http_build_query($query);
$query = preg_replace('/%5B[0-9]+%5D/simU', '%5B%5D', $query);if you send boolean values it transform in integer :
$a = [teste1= true,teste2=false];
echo http_build_query($a)
//result will be teste1=1&teste2=0Number to string conversion occured in <?php http_build_query() ?> is affected by locale settings, which might not be obvious.
<?php
$params = ["v" => 5.63];
setlocale(LC_ALL, 'us_En');
http_build_query($params) // v=5.63
setlocale(LC_ALL, 'ru_RU');
http_build_query($params) // v=5,63 mind the comma
?>As noted before, with php5.3 the separator is & on some servers it seems. Normally if posting to another php5.3 machine this will not be a problem.
But if you post to a tomcat java server or something else the & might not be handled properly.
To overcome this specify:
http_build_query($array, '', '&');
and NOT
http_build_query($array); //gives & to some serversIf you need the inverse functionality, and (like me) you cannot use pecl_http, you may want to use something akin to the following.
<?php function http_parse_query($Query) {
// mimic the behavior of $_GET, see also RFC 1738 and 3986.
$Delimiter = ini_get('arg_separator.input');
$Params = array();
foreach (explode($Delimiter, $Query) as $NameValue) {
preg_match(
'/^(?P<name>[^=\[]*)(?P<indices_present>\[(?P<indices>[^\]]*(\]\[[^\]]*)*)\]?)?(?P<value_present>=(?P<value>.*))?$/',
$NameValue,
$NameValueParts
);
if (!empty($NameValueParts)) {
$Param =& $Params[$NameValueParts['name']];
if (!empty($NameValueParts['indices_present'])) {
$Indices = explode('][', $NameValueParts['indices']);
foreach ($Indices as $Index) {
if (!is_array($Param)) {
$Param = array();
}
if ($Index === '') {
$Param[] = array();
end($Param);
$Param =& $Param[key($Param)];
} else {
if (ctype_digit($Index)) { $Index = (int) $Index; }
if (!array_key_exists($Index, $Param)) {
$Param[$Index] = array();
}
$Param =& $Param[$Index];
}
}
}
if (!empty($NameValueParts['value_present'])) {
$Param = urldecode($NameValueParts['value']);
} else {
$Param = '';
}
}
}
return $Params;
}?>Is it worth noting that if query_data is an associative array and a value is itself an empty array, or an array of nothing but empty array (or arrays containing only empty arrays etc.), the corresponding key will not appear in the resulting query string?
E.g.
$post_data = array('name'=>'miller', 'address'=>array('address_lines'=>array()), 'age'=>23);
echo http_build_query($post_data);
will print
name=miller&age=23Be careful about Example 1 -- it is exactly how *not* to implement things.
& as a separator is the URL encoding.
& is HTML encoding.
You should HTML encode your URL if embedding it in a web page. This is more involved than just replacing & with &. Doing as this example suggests is a security hole waiting to happen.When using the http_build_query function to create a URL query from an array for use in something like curl_setopt($ch, CURLOPT_POSTFIELDS, $post_url), be careful about the url encoding.
In my case, I simply wanted to pass on the received $_POST data to a CURL's POST data, which requires it to be in the URL format. If something like a space [ ] goes into the http_build_query, it comes out as a +. If you're then sending this off for POST again, you won't get the expected result. This is good for GET but not POST.
Instead you can make your own simple function if you simply want to pass along the data:
<?php
$post_url = '';
foreach ($_POST AS $key=>$value)
$post_url .= $key.'='.$value.'&';
$post_url = rtrim($post_url, '&');
?>
You can then use this to pass along POST data in CURL.
<?php
$ch = curl_init($some_url);
curl_setopt($ch, CURLOPT_POST, true);
curl_setopt($ch, CURLOPT_POSTFIELDS, $post_url);
curl_exec($ch);
?>
Note that at the final page that processes the POST data, you should be properly filtering/escaping it.As noted, this function omits keys with null values. This could break some code which treats the key as boolean, and so has no value, or other code expecting the array to be populated regardless of value.
A workaround for this is to replace the null values with an empty string:
$data=array(
'a'=>'apple',
'b'=>2,
'c'=>null,
'd'=>'…',
);
// Compensate for fact that http_build_query omits null values
foreach($data as &$datum) if($datum===null) $datum='';
Losing the null-ness of the original is no real loss if it’s supposed to be a real query string. If the null is important, you could use a dummy value instead.
MarkCorrect implementation of coding the array of params without indexes (valdikks fixed code - didnt work for inner arrays):
<code>
function cr_post($a,$b='',$c=0)
{
if (!is_array($a)) return false;
foreach ((array)$a as $k=>$v)
{
if ($c)
{
if( is_numeric($k) )
$k=$b."[]";
else
$k=$b."[$k]";
}
else
{ if (is_int($k))
$k=$b.$k;
}
if (is_array($v)||is_object($v))
{
$r[]=cr_post($v,$k,1);
continue;
}
$r[]=urlencode($k)."=".urlencode($v);
}
return implode("&",$r);
}
</code>When using http_build_query($args) where $args is an array; note that there is a limit to the size of array. See max_input_vars in your php.ini to increase this size.I noticed that even with the magic quotes disabled, http_build_query() automagically adds slashes to strings.
So, I had to add "stripslashes" to every string variable.on my install of PHP 5.3, http_build_query() seems to use & as the default separator. Kind of interesting when combined with stream_context_create() for a POST request, and getting $_POST['amp;fieldName'] on the receiving end.Warning: Different arrays may return the same result
<CODE>
$a1 = array('x[y]' => array('a'=>1));
$a2 = array('x' => array('y' => array('a'=>1)));
$q1 = http_build_query($a1);
$q2 = http_build_query($a2);
var_dump($a1);
echo '<BR>';
var_dump($a2);
echo '<BR>';
echo $q1;
echo '<BR>';
echo $q2;
echo '<BR>';
</CODE>
Result:
array(1) { ["x[y]"]=> array(1) { ["a"]=> int(1) } }
array(1) { ["x"]=> array(1) { ["y"]=> array(1) { ["a"]=> int(1) } } }
x%5By%5D%5Ba%5D=1
x%5By%5D%5Ba%5D=1It's not mentioned in the documentation, but when calling http_build_query on an object, public null fields are ignored.
<?php
class A {
public int $publicNotNull;
public ?int $publicNull;
private string $privateNotNull;
public function __construct()
{
$this->publicNotNull = 2;
$this->privateNotNull = "Test";
}
}
$a = new A();
echo http_build_query($a); // publicNotNull=2
?>While http_build_query can also be used to encode most classes, into a query string, SimpleXML Elements with <![CDATA[]]> values are picked up as empty arrays, and therefore aren't included naturally.
<?php
$xml = simplexml_load_string( '<wrapper><key><![CDATA[value]]></key><key2>value2</key2></wrapper>' );
var_dump( $xml, http_build_query( $xml ) );
/* Outputs:
object(SimpleXMLElement)#1 (2) {
["key"]=>
object(SimpleXMLElement)#2 (0) {
}
["key2"]=>
string(6) "value2"
}
string(11) "key2=value2"
*/
?>