PHP 8.4.1 Released!

    ord

    (PHP 4, PHP 5, PHP 7, PHP 8)

    ord — Преобразовывает первый байт строки в число от 0 до 255

    Описание

    ord(string $character): int

    Функция интерпретирует двоичное значение первого байта строки character как беззнаковое целое число между 0 и 255.

    Результат функции будет эквивалентен возврату позиции символа в таблице сопоставления кодировки, если строку закодировали однобайтовой кодировкой наподобие ASCII, ISO-8859 или Windows 1252. Обратите внимание, функция не распознаёт кодировку строк и не идентифицирует кодовую точку Юникода в многобайтовой кодировке наподобие UTF-8 или UTF-16.

    Функция дополняет функцию chr().

    Список параметров

    character

    Символ.

    Возвращаемые значения

    Функция возвращает целое число между 0 и 255.

    Примеры

    Пример #1 Пример использования функции ord()

    <?php

    $str     = "\n";

    if (    ord($str) == 10) {
    echo     "Первый символ переменной \$str — перевод строки.\n";
    }

    ?>

    Пример #2 Проверка отдельных байтов строки в кодировке UTF-8

    <?php

    declare(encoding='UTF-8');

    $str = "🐘";

    for (    $pos=0; $pos < strlen($str); $pos++) {
    $byte = substr($str, $pos);
    echo     'Значение байта в позиции ' . $pos . ' строки $str равно ' . ord($byte) . PHP_EOL;
    }

    ?>

    Результат выполнения приведённого примера:


    Значение байта в позиции 0 строки $str равен 240
    Значение байта в позиции 1 строки $str равен 159
    Значение байта в позиции 2 строки $str равен 144
    Значение байта в позиции 3 строки $str равен 152

    Смотрите также

    Улучшение страницы

    Инструкция • Исправление • Сообщение об ошибке
    ＋Добавить

    Примечания пользователей 6 notes

    up
    47
    arglanir+phpnet at gmail dot com
    12 years ago
    As ord() doesn't work with utf-8, and if you do not have access to mb_* functions, the following function will work well:
    <?php
    function ordutf8($string, &$offset) {
    $code = ord(substr($string, $offset,1));
    if (    $code >= 128) { //otherwise 0xxxxxxx
    if ($code < 224) $bytesnumber = 2; //110xxxxx
    else if ($code < 240) $bytesnumber = 3; //1110xxxx
    else if ($code < 248) $bytesnumber = 4; //11110xxx
    $codetemp = $code - 192 - ($bytesnumber > 2 ? 32 : 0) - ($bytesnumber > 3 ? 16 : 0);
    for (    $i = 2; $i <= $bytesnumber; $i++) {
    $offset ++;
    $code2 = ord(substr($string, $offset, 1)) - 128; //10xxxxxx
    $codetemp = $codetemp*64 + $code2;
    }
    $code = $codetemp;
    }
    $offset += 1;
    if (    $offset >= strlen($string)) $offset = -1;
    return     $code;
    }
    ?>
    $offset is a reference, as it is not easy to split a utf-8 char-by-char. Useful to iterate on a string:
    <?php
    $text     = "abcàê߀abc";
    $offset = 0;
    while (    $offset >= 0) {
    echo     $offset.": ".ordutf8($text, $offset)."\n";
    }
    /* returns:
    0: 97
    1: 98
    2: 99
    3: 224
    5: 234
    7: 223
    9: 8364
    12: 97
    13: 98
    14: 99
    */
    ?>
    Feel free to adapt my code to fit your needs.
    up
    7
    paco at olecode dot com
    4 years ago
    this function convert UTF-8 string to RTF code string. I am using code of v0rbiz at yahoo dot com, thanks!!!

    function cadena_rtf($txt)
    {
    $result = null;

    for ($pos = 0; $pos < mb_strlen($txt); $pos++) {

    $char = mb_substr($txt, $pos, 1);

    if (!preg_match("/[A-Za-z1-9,.]/", $char)) {
    //unicode ord real!!!
    $k = mb_convert_encoding($char, 'UCS-2LE', 'UTF-8');
    $k1 = ord(substr($k, 0, 1));
    $k2 = ord(substr($k, 1, 1));
    $ord = $k2 * 256 + $k1;

    if ($ord > 255) {
    $result .= '\uc1\u' . $ord . '*';
    } elseif ($ord > 32768) {
    $result .= '\uc1\u' . ($ord - 65535) . '*';
    } else {
    $result .= "\\'" . dechex($ord);
    }
    } else {
    $result .= $char;
    }
    }
    return $result;
    }
    up
    18
    rowan dot collins at cwtdigital dot com
    11 years ago
    Regarding character sets, and whether or not this is "ASCII". Firstly, there is no such thing as "8-bit ASCII", so if it were ASCII it would only ever return integers up to 127. 8-bit ASCII-compatible encodings include the ISO 8859 family of encodings, which map various common characters to the values from 128 to 255. UTF-8 is also designed so that characters representable in 7-bit ASCII are coded the same; byte values higher than 127 in a UTF-8 string represent the beginning of a multi-byte character.

    In fact, like most of PHP's string functions, this function isn't doing anything to do with character encoding at all - it is just interpreting a binary byte from a string as an unsigned integer. That is, ord(chr(200)) will always return 200, but what character chr(200) *means* will vary depending on what character encoding it is *interpreted* as part of (e.g. during display).

    A technically correct description would be "Returns an integer representation of the first byte of a string, from 0 to 255. For single-byte encodings such as (7-bit) ASCII and the ISO 8859 family, this will correspond to the first character, and will be the position of that character in the encoding's mapping table. For multi-byte encodings, such as UTF-8 or UTF-16, the byte may not represent a complete character."

    The link to asciitable.com should also be replaced by one which explains what character encoding it is displaying, as "Extended ASCII" is an ambiguous and misleading name.
    up
    8
    v0rbiz at yahoo dot com
    20 years ago
    I did not found a unicode/multibyte capable 'ord' function, so...

    <?php
    function uniord($u) {
    $k = mb_convert_encoding($u, 'UCS-2LE', 'UTF-8');
    $k1 = ord(substr($k, 0, 1));
    $k2 = ord(substr($k, 1, 1));
    return     $k2 * 256 + $k1;
    }
    ?>
    up
    -1
    Noname
    2 years ago
    <?php

    declare (encoding='UTF-8');

    $animalsstr = '🐀🐁🐂🐃🐄🐅🐆🐇🐈🐉🐊🐋🐌🐍🐎🐏🐐🐑🐒🐓🐔🐕🐖🐗🐘🐙'
    . '🐚🐛🐜🐝🐞🐟🐠🐡🐢🐣🐤🐥🐦🐧🐨🐩🐪🐫🐬🐭🐮🐯🐰🐱🐲🐳🐴🐵'
    . '🐶🐷🐸🐹🐺🐻🐼🐽🐾🐿';

    $animals = mb_str_split($animalsstr);
    foreach (    $animals as $animal) {
    for (    $pos = 0; $pos < strlen($animal); $pos++) {
    $byte = substr($animal, $pos);
    echo     "Byte $pos of $animal has value " . ord($byte) . PHP_EOL;
    }
    }

    ?>
    up
    -3
    Anonymous
    3 years ago
    For anyone who's looking to convert full strings to map and back it's pretty simple but takes some getting used to...the code below saves an hour of scrounging codes for beginners like myself.

    function var2map($a) {
    $b='';
    $c=strlen($a);
    for($i=0; $i<$c; ++$i) {
    $d=ord(substr($a,$i,1));
    if($d<10) {
    $e='00'.$d;
    } else {
    if($d<100) {
    $e='0'.$d;
    } else {
    $e=$d;
    }
    }
    if($b=='') {
    $b=$e;
    } else {
    $b=$b.$e;
    }
    }
    return $b;
    }

    function map2var($a) {
    $b='';
    $c=strlen($a) / 3;
    for($i=0; $i<$c; ++$i) {
    $d=chr(substr($a,$i*3,3));
    if($b=='') {
    $b=$d;
    } else {
    $b=$b.$d;
    }
    }
    return $b;
    }
    ＋Добавить
    To Top