There's no need to include your own API code to natsort an associative array by key. PHP's in-built functions (other than natsort) can do the job just fine:
<?php
uksort($myArray, "strnatcmp");
?>
(PHP 4, PHP 5, PHP 7, PHP 8)
natsort — Bir diziyi "doğal sıralama" algoritmasıyla sıralar
Bu işlev, abecesayısal dizgeleri, insanların anahtar değer ilişkisini sağlayarak yaptıkları şekilde gerçekleyen bir sıralama algoritmasını kullanarak sıralar. Bu algoritmaya "doğal sıralama" algoritması adı verilir. Bu algoritma ile sort() işlevinin yaptığı standart sıralama arasındaki farkı gösteren bir örnek aşağıdadır.
Bilginize:
İki üye karşılaştırıldığında eşitse bunların özgün sıralamadaki yerleri korunur. PHP 8.0.0 öncesinde sıralı dizideki göreli yerleri tanımsızdı.
Bilginize:
Dahili dizi göstericisi ilk elemana atanır.
diziSıralanacak dizi.
Daima true döndürür.
Örnek 1 - natsort() genel kullanım örnekleri
<?php
$array1 = $array2 = array("img12.png", "img10.png", "img2.png", "img1.png");
asort($array1);
echo "Standart sıralama\n";
print_r($array1);
natsort($array2);
echo "\nDoğal sıralama\n";
print_r($array2);
?>Yukarıdaki örneğin çıktısı:
Standart sıralama
Array
(
[3] => img1.png
[1] => img10.png
[0] => img12.png
[2] => img2.png
)
Doğal sıralama
Array
(
[3] => img1.png
[2] => img2.png
[1] => img10.png
[0] => img12.png
)
Daha fazla bilgi için Martin Pool'un » Natural Order String Comparison sayfasına bakınız.
Örnek 2 - Olası sorunları gösteren natsort() örnekleri
<?php
echo "Negatif sayılar\n";
$negative = array('-5','3','-2','0','-1000','9','1');
print_r($negative);
natsort($negative);
print_r($negative);
echo "Sıfır doldurma\n";
$zeros = array('09', '8', '10', '009', '011', '0');
print_r($zeros);
natsort($zeros);
print_r($zeros);
?>Yukarıdaki örneğin çıktısı:
Negatif sayılar
Array
(
[0] => -5
[1] => 3
[2] => -2
[3] => 0
[4] => -1000
[5] => 9
[6] => 1
)
Array
(
[2] => -2
[0] => -5
[4] => -1000
[3] => 0
[6] => 1
[1] => 3
[5] => 9
)
Sıfır doldurma
Array
(
[0] => 09
[1] => 8
[2] => 10
[3] => 009
[4] => 011
[5] => 0
)
Array
(
[5] => 0
[1] => 8
[3] => 009
[0] => 09
[2] => 10
[4] => 011
)
There's no need to include your own API code to natsort an associative array by key. PHP's in-built functions (other than natsort) can do the job just fine:
<?php
uksort($myArray, "strnatcmp");
?>About the reverse natsort.. Maybe simpler to do :
function strrnatcmp ($a, $b) {
return strnatcmp ($b, $a);
}Be careful of the new behaviour in 5.2.10 version.
See the following sample:
<?php
$array = array('1 bis', '10 ter', '0 PHP', '0', '01', '01 Ver', '0 ', '1 ', '1');
natsort($array);
echo '<pre>';
print_r($array);
echo '</pre>';
?>
5.2.6-1 will output:
Array
(
[3] => 0
[6] => 0
[2] => 0 OP
[4] => 01
[5] => 01 Ver
[8] => 1
[7] => 1
[0] => 1 bis
[1] => 10 ter
)
5.2.10 will output:
Array
(
[6] => 0
[3] => 0
[8] => 1
[4] => 01
[7] => 1
[5] => 01 Ver
[0] => 1 bis
[1] => 10 ter
[2] => 0 OP
)
GreetingsFor those who want to natsort a 2d-array on the first element of each sub-array, the following few lines should do the job.
<?php
function natsort2d(&$aryInput) {
$aryTemp = $aryOut = array();
foreach ($aryInput as $key=>$value) {
reset($value);
$aryTemp[$key]=current($value);
}
natsort($aryTemp);
foreach ($aryTemp as $key=>$value) {
$aryOut[] = $aryInput[$key];
}
$aryInput = $aryOut;
}
?>Reverse Natsort:
function rnatsort($a, $b) {
return -1 * strnatcmp($a, $b);
}
usort($arr, "rnatsort");Under limited testing, natsort() appears to work well for IP addresses. For my needs, it is far less code than the ip2long()/long2ip() conversion I was using before.To make a reverse function, you can simply:
function rnatsort(&$a){
natsort($a);
$a = array_reverse($a, true);
}I got caught out through naive use of this feature - attempting to sort a list of image filenames from a digital camera, where the filenames are leading zero padded (e.g. DSCF0120.jpg) , will not sort correctly.
Maybe the example could be modified to exhibit this behaviour
(e.g. set array to -img0120.jpg','IMG0.png', 'img0012.png', 'img10.png', 'img2.png', 'img1.png', 'IMG3.png)
If the example hadn't used images I would have coded it correctly first time around!Note: negatives number.
<?php
$a = array(-5,-2,3,9);
natsort($a);
print_r($a);
?>
Will output:
Array ( [1] => -2 [0] => -5 [2] => 3 [3] => 9 )This made me waste a lot of my precious youth ... natsort() is buggy if all numbers don't have the same number of decimal places.
(php 5.6.4-4ubuntu6.2)
<?php
$different_decimal_places_in_values = array('D'=>'13.59', '14.6' => '14.6', 'C-' => '14.19');
natsort($a);
var_dump($a);
/*echoes
array(3) {
'D' =>
string(5) "13.59"
'14.6' =>
string(4) "14.6" <----------- badly ordered
'C-' =>
string(5) "14.19"
}*/
?>
While this
<?php
$same_num_decimal_places_in_values = array('D'=>'13.59', '14.6' => '14.60', 'C-' => '14.19'); natsort($a); var_dump($a);
/*echoes
array(3) {
'D' =>
string(5) "13.59"
'C-' =>
string(5) "14.19"
'14.6' =>
string(5) "14.60" <--------- that is the correct position
}
*/
?>there is another rnatsort function lower on the page, but it didn't work in the context i needed it in.
reasoning for this:
sorting naturally via the keys of an array, but needing to reverse the order.
function rnatsort ( &$array = array() )
{
$keys = array_keys($array);
natsort($keys);
$total = count($keys) - 1;
$temp1 = array();
$temp2 = array();
// assigning original keys to an array with a backwards set of keys, to use in krsort();
foreach ( $keys as $key )
{
$temp1[$total] = $key;
--$total;
}
ksort($temp1);
// setting the new array, with the order from the krsort() and the values of original array.
foreach ( $temp1 as $key )
{
$temp2[$key] = $array[$key];
}
$array = $temp2;
}This function can be very usefull, but in some cases, like if you want to sort a MySQL query result, it's important to keep in mind that MySQL as built'in sorting functions which are way faster than resorting the result using a complex php algorythm, especially with large arrays.
ex; 'SELECT * FROM `table` ORDER BY columnName ASC, columnName2 DESC'additional to the code posted by justin at redwiredesign dot com (which I found very usefull) here is a function that sorts complex arrays like this:
<?
$array['test0'] = array('main' => 'a', 'sub' => 'a');
$array['test2'] = array('main' => 'a', 'sub' => 'b');
$array['test3'] = array('main' => 'b', 'sub' => 'c');
$array['test1'] = array('main' => 'a', 'sub' => 'c');
$array['test4'] = array('main' => 'b', 'sub' => 'a');
$array['test5'] = array('main' => 'b', 'sub' => 'b');
?>
or
<?
$array[0] = array('main' => 1, 'sub' => 1);
$array[2] = array('main' => 1, 'sub' => 2);
$array[3] = array('main' => 2, 'sub' => 3);
$array[1] = array('main' => 1, 'sub' => 3);
$array[4] = array('main' => 2, 'sub' => 1);
$array[5] = array('main' => 2, 'sub' => 2);
?>
on one or more columns.
the code
<? $array = array_natsort_list($array,'main','sub'); ?>
will result in $array being sortet like this:
test0,test2,test1,test4,test5,test3
or
0,2,1,4,5,3.
you may even submit more values to the function as it uses a variable parameter list. the function starts sorting on the last and the goes on until the first sorting column is reached.
to me it was very usefull for sorting a menu having submenus and even sub-submenus.
i hope it might help you too.
here is the function:
<?
function array_natsort_list($array) {
// for all arguments without the first starting at end of list
for ($i=func_num_args();$i>1;$i--) {
// get column to sort by
$sort_by = func_get_arg($i-1);
// clear arrays
$new_array = array();
$temporary_array = array();
// walk through original array
foreach($array as $original_key => $original_value) {
// and save only values
$temporary_array[] = $original_value[$sort_by];
}
// sort array on values
natsort($temporary_array);
// delete double values
$temporary_array = array_unique($temporary_array);
// walk through temporary array
foreach($temporary_array as $temporary_value) {
// walk through original array
foreach($array as $original_key => $original_value) {
// and search for entries having the right value
if($temporary_value == $original_value[$sort_by]) {
// save in new array
$new_array[$original_key] = $original_value;
}
}
}
// update original array
$array = $new_array;
}
return $array;
}
?>$array1 = $array2 = array('IMG0.png', 'img12.png', 'img10.png', 'img2.png', 'img1.png', 'IMG3.png');
natsort($array1);
echo "\n natsort(); \n";
print_r($array1);
sort($array2, SORT_NATURAL);
echo "\n sort() with SORT_NATURAL Option\n";
print_r($array2);
Ouput:
natsort();
Array
(
[0] => IMG0.png
[5] => IMG3.png
[4] => img1.png
[3] => img2.png
[2] => img10.png
[1] => img12.png
)
sort() with SORT_NATURAL Option
Array
(
[0] => IMG0.png
[1] => IMG3.png
[2] => img1.png
[3] => img2.png
[4] => img10.png
[5] => img12.png
)
as we can see it's the same values but not the same keys, and also it's same for sort($array1, SORT_NATURAL | SORT_FLAG_CASE); and natcasesort($array2)To naturally sort by array key, the uksort function can be used.
<?php
echo "Sort by keys\n";
$smoothie = array('orange' => 1, 'apple' => 1, 'yogurt' => 4, 'banana' => 4);
print_r($smoothie);
uksort( $smoothie, 'strnatcmp');
print_r($smoothie)
?>
Output:
Sort by keys
Array
(
[orange] => 1
[apple] => 1
[yogurt] => 4
[banana] => 4
)
Array
(
[apple] => 1
[banana] => 4
[orange] => 1
[yogurt] => 4
)
See http://php.net/manual/en/function.uksort.php for more information about uksort and http://php.net/strnatcmp for usage of strnatcmp.Here's a handy function to sort an array on 1 or more columns using natural sort:
<?php
// Example: $records = columnSort($records, array('name', 'asc', 'addres', 'desc', 'city', 'asc'));
$globalMultisortVar = array();
function columnSort($recs, $cols) {
global $globalMultisortVar;
$globalMultisortVar = $cols;
usort($recs, 'multiStrnatcmp');
return($recs);
}
function multiStrnatcmp($a, $b) {
global $globalMultisortVar;
$cols = $globalMultisortVar;
$i = 0;
$result = 0;
while ($result == 0 && $i < count($cols)) {
$result = ($cols[$i + 1] == 'desc' ? strnatcmp($b[$cols[$i]], $a[$cols[$i]]) : $result = strnatcmp($a[$cols[$i]], $b[$cols[$i]]));
$i+=2;
}
return $result;
}
?>
Greetings,
- Johnnatsort might not act like you would expect with zero padding, heres a quick sample.
<?php
$array = array('09', '8', '10', '009', '011');
natsort($array);
?>
/*
Array
(
[3] => 009
[4] => 011
[0] => 09
[1] => 8
[2] => 10
)
*/There's one little thing missing in this useful bit of code posted by mbirth at webwriters dot de:
<?php
function natsort2d(&$aryInput) {
$aryTemp = $aryOut = array();
foreach ($aryInput as $key=>$value) {
reset($value);
$aryTemp[$key]=current($value);
}
natsort($aryTemp);
foreach ($aryTemp as $key=>$value) {
$aryOut[$key] = $aryInput[$key];
// --------^^^^ add this if you want your keys preserved!
}
$aryInput = $aryOut;
}
?>As noted in other notes, natsort() does _not_ always return the expected sort order. It seems especially buggy when decimals or 0 padding is used. I've filed this bug report on the issue:
https://bugs.php.net/bug.php?id=74672