str_replace

(PHP 4, PHP 5, PHP 7, PHP 8)

str_replace — 検索文字列に一致したすべての文字列を置換する

説明

str_replace(
    array|string $search,
    array|string $replace,
    string|array $subject,
    int &$count = null
): string|array

この関数は、subject の中の search を全て replace に置換します。

固定の文字列ではなく、パターンベースでテキストを置換したい場合、 preg_replace() を使ってください。

パラメータ

search と replace が配列の場合、str_replace() は各配列から値をひとつ取り出し、 subject 上で検索と置換を行うために使用します。 replace の値が search よりも少ない場合、置換される値の残りの部分には空の文字列が使用されます。 search が配列で replace が文字列の場合、この置換文字列が search の各値について使用されます。しかし、逆は意味がありません。

search あるいは replace が配列の場合は、配列の最初の要素から順に処理されます。

search

探したい値。needle (針) と呼ばれることもあります。配列を使えば、複数の値を指定することもできます。

replace

見つかった search を置き換える値。配列を使えば、複数の値を指定することもできます。

subject

検索・置換の対象となる文字列あるいは配列。 haystack (干し草の山) と呼ばれることもあります。

subject が配列の場合、 subject の各エントリについて検索と置換が行われ、戻り値は同様に配列となります。

count

指定した場合は、マッチして置換が行われた箇所の個数がここに格納されます。

戻り値

この関数は、置換後の文字列あるいは配列を返します。

例

例1 基本的な str_replace() の例

<?php
// <body text='black'> となります
$bodytag = str_replace("%body%", "black", "<body text='%body%'>");

// Hll Wrld f PHP となります
$vowels = array("a", "e", "i", "o", "u", "A", "E", "I", "O", "U");
$onlyconsonants = str_replace($vowels, "", "Hello World of PHP");

// You should eat pizza, beer, and ice cream every day となります
$phrase  = "You should eat fruits, vegetables, and fiber every day.";
$healthy = array("fruits", "vegetables", "fiber");
$yummy   = array("pizza", "beer", "ice cream");

$newphrase = str_replace($healthy, $yummy, $phrase);

// 2 となります
$str = str_replace("ll", "", "good golly miss molly!", $count);
echo $count;
?>

例2 str_replace() に関するちょっとした事実

<?php
// 置換の順番を指定します
$str     = "Line 1\nLine 2\rLine 3\r\nLine 4\n";
$order   = array("\r\n", "\n", "\r");
$replace = '<br />';

// まず最初に \r\n を置換するので、二重に変換されることはありません
$newstr = str_replace($order, $replace, $str);

// 出力は F となります。A が B に、そして B が C に、そして……
// 最終的に E が F に置換されるからです。置換は左から右へと順に行われます
$search  = array('A', 'B', 'C', 'D', 'E');
$replace = array('B', 'C', 'D', 'E', 'F');
$subject = 'A';
echo str_replace($search, $replace, $subject);

// 出力は apearpearle pear となります
// 上で説明したのと同じ理由です
$letters = array('a', 'p');
$fruit   = array('apple', 'pear');
$text    = 'a p';
$output  = str_replace($letters, $fruit, $text);
echo $output;
?>

注意

注意: この関数はバイナリデータに対応しています。

警告

置換の順番に関するメモ

str_replace() は左から右へと置換を行うので、複数の置換を行うときには、前に追加された値を置換する可能性もあります。このドキュメントのサンプルを参照ください。

注意:
この関数は大文字小文字を区別します。区別せずに置換するには str_ireplace() を使用します。

参考

str_ireplace() - 大文字小文字を区別しない str_replace
substr_replace() - 文字列の一部を置換する
preg_replace() - 正規表現検索および置換を行う
strtr() - 文字の変換あるいは部分文字列の置換を行う

Found A Problem?

Learn How To Improve This Page • Submit a Pull Request • Report a Bug

＋add a note

User Contributed Notes 33 notes

down

269

nikolaz dot tang at hotmail dot com ¶

14 years ago

A faster way to replace the strings in multidimensional array is to json_encode() it, do the str_replace() and then json_decode() it, like this:



<?php

function str_replace_json($search, $replace, $subject){

     return json_decode(str_replace($search, $replace,  json_encode($subject)));



}

?>



This method is almost 3x faster (in 10000 runs.) than using recursive calling and looping method, and 10x simpler in coding.



Compared to:



<?php

function str_replace_deep($search, $replace, $subject)

{

    if (is_array($subject))

    {

        foreach($subject as &$oneSubject)

            $oneSubject = str_replace_deep($search, $replace, $oneSubject);

        unset($oneSubject);

        return $subject;

    } else {

        return str_replace($search, $replace, $subject);

    }

}

?>

down

ressing1 at gmail dot com ¶

3 years ago

To remove all characters from string $b that exist in string $a:

$a="ABC";
$b="teAsBtC";
echo str_replace(str_split($a),'',$b); 

Output: test

To remove all characters from string $b that don't exist in string $a:

$a="ABC";
$b="teAsBtC";
echo str_replace(str_split(str_replace(str_split($a),'',$b)),'',$b);

Output: ABC

down

Alberto Lepe ¶

15 years ago

Be careful when replacing characters (or repeated patterns in the FROM and TO arrays):



For example:



<?php

$arrFrom = array("1","2","3","B");

$arrTo = array("A","B","C","D");

$word = "ZBB2";

echo str_replace($arrFrom, $arrTo, $word);

?>



I would expect as result: "ZDDB"

However, this return: "ZDDD"

(Because B = D according to our array)



To make this work, use "strtr" instead:



<?php

$arr = array("1" => "A","2" => "B","3" => "C","B" => "D");

$word = "ZBB2";

echo strtr($word,$arr);

?>



This returns: "ZDDB"

down

moostende at gmail dot com ¶

13 years ago

Note that this does not replace strings that become part of replacement strings. This may be a problem when you want to remove multiple instances of the same repetative pattern, several times in a row.



If you want to remove all dashes but one from the string '-aaa----b-c-----d--e---f' resulting in '-aaa-b-c-d-e-f', you cannot use str_replace. Instead, use preg_replace:



<?php

$challenge = '-aaa----b-c-----d--e---f';

echo str_replace('--', '-', $challenge).'<br>';

echo preg_replace('/--+/', '-', $challenge).'<br>';

?>



This outputs the following:

-aaa--b-c---d-e--f

-aaa-b-c-d-e-f

down

karst at onlinq dot nl ¶

10 years ago

"If search is an array and replace is a string, then this replacement string is used for every value of search. The converse would not make sense, though. "

I think one important (and not at all vaguely theoretical) use-case is completely ignored here. Take, for example, the way the PDO handles parameter replacement.

If we have the following query:
"SELECT * FROM my_table WHERE (id = ? AND my_column = ? AND other_column = ?);"
The "?"s should be replaced by each successive variable in a $parameters array. That is EXACTLY the use case for "search" being a value and "replace" being an array. 

Considering that this is not only a real-world example but also part of a core PHP functionality I find it very strange that it's dismissed so easily here.

down

Wes Foster ¶

15 years ago

Feel free to optimize this using the while/for or anything else, but this is a bit of code that allows you to replace strings found in an associative array.



For example:

<?php

$replace = array(

'dog' => 'cat',

'apple' => 'orange'

'chevy' => 'ford'

);



$string = 'I like to eat an apple with my dog in my chevy';



echo str_replace_assoc($replace,$string);



// Echo: I like to eat an orange with my cat in my ford

?>



Here is the function:



<?php

function strReplaceAssoc(array $replace, $subject) {

   return str_replace(array_keys($replace), array_values($replace), $subject);    

}

?>



[Jun 1st, 2010 - EDIT BY thiago AT php DOT net: Function has been replaced with an updated version sent by ljelinek AT gmail DOT com]

down

viundan at gmail dot com ¶

8 years ago

Decision to avoid problem "it might replace a previously inserted value when doing multiple replacements. See also the examples in this document." 

$urls - array of urls i want to replace with tag <a> and urls could be similar
http://abc.com/parameter/
http://abc.com/

// at first sort by length to have longest firstly
usort($urls,'sortByLen');

$replaces=[];

// replace all urls with unique
foreach($urls as $url){
    $replace = '__REPLACE' . uniqid() . '__';     
    $text = str_replace($url,$replace, $text);
    $replaces[$replace] = '<a href="' . $url . '">' . $url . '</a>';
}

foreach($replaces as $key => $replace){
    $text = str_replace($key,$replace, $text);
}

--------------

function sortByLen($a,$b){
    return strlen($b)-strlen($a);
}

Hope it will help others like me

down

ravenswd at gmail dot com ¶

6 years ago

This is what happens when the search and replace arrays are different sizes:

<?php
$search  = array('a', 'b', 'c', 'd', 'e');
$replace = array('A', 'B', 'C');
$subject = 'abcdefg';
echo str_replace($search, $replace, $subject);
// result: 'ABCfg'

$search  = array('a', 'b', 'c');
$replace = array('A', 'B', 'C', 'D', 'E');
$subject = 'abcdefg';
echo str_replace($search, $replace, $subject);
// result: 'ABCdefg'
?>

No warning or error is generated in either of these cases.

down

michael dot moussa at gmail dot com ¶

15 years ago

As previous commentators mentioned, when $search contains values that occur earlier in $replace, str_replace will factor those previous replacements into the process rather than operating solely on the original string.  This may produce unexpected output.

Example:

<?php
$search = array('A', 'B', 'C', 'D', 'E');
$replace = array('B', 'C', 'D', 'E', 'F');
$subject = 'ABCDE';

echo str_replace($search, $replace, $subject); // output: 'FFFFFF'
?>

In the above code, the $search and $replace should replace each occurrence in the $subject with the next letter in the alphabet.  The expected output for this sample is 'BCDEF'; however, the actual output is 'FFFFF'.

To more clearly illustrate this, consider the following example:

<?php
$search = array('A', 'B', 'C', 'D', 'E');
$replace = array('B', 'C', 'D', 'E', 'F');
$subject = 'A';

echo str_replace($search, $replace, $subject); // output: 'F'
?>

Since 'A' is the only letter in the $search array that appears in $subject, one would expect the result to be 'B'; however, replacement number $n does *not* operate on $subject, it operates on $subject after the previous $n-1 replacements have been completed.

The following function utilizes array_combine and strtr to produce the expected output, and I believe it is the most efficient way to perform the desired string replacement without prior replacements affecting the final result.

<?php
/**
* When using str_replace(...), values that did not exist in the original string (but were put there by previous
* replacements) will be replaced continuously.  This string replacement function is designed replace the values
* in $search with those in $replace while not factoring in prior replacements.  Note that this function will
* always look for the longest possible match first and then work its way down to individual characters.
*
* The "o" in "stro_replace" represents "original", indicating that the function operates only on the original string.
*
* @param array $search list of strings or characters that need to be replaced
* @param array $replace list of strings or characters that will replace the corresponding values in $search
* @param string $subject the string on which this operation is being performed
*
* @return string $subject with all substrings in the $search array replaced by the values in the $replace array
*/
function stro_replace($search, $replace, $subject)
{
    return strtr( $subject, array_combine($search, $replace) );
}

$search = array('A', 'B', 'C', 'D', 'E');
$replace = array('B', 'C', 'D', 'E', 'F');
$subject = 'ABCDE';

echo stro_replace($search, $replace, $subject); // output: 'BCDEF'
?>

Some other examples:

<?php
$search = array(' ', '&');
$replace = array('&nbsp;', '&amp;');
$subject = 'Hello & goodbye!';

// We want to replace the spaces with &nbsp; and the ampersand with &amp;
echo str_replace($search, $replace, $subject); // output: "Hello&amp;nbsp&amp;&amp;nbspgoodbye!" - wrong!

echo stro_replace($search, $replace, $subject); // output: "Hello&nbsp;&amp;&nbsp;goodbye!" - correct!

/*
    Note:  Run the above code in the CLI or view source on your web browser - the replacement strings for stro_replace are HTML entities which the browser interprets.
*/
?>

<?php
$search = array('ERICA', 'AMERICA');
$replace = array('JON', 'PHP');
$subject = 'MIKE AND ERICA LIKE AMERICA';

// We want to replace the name "ERICA" with "JON" and the word "AMERICA" with "PHP"
echo str_replace($search, $replace, $subject); // output: "MIKE AND JON LIKE AMJON", which is not correct

echo stro_replace($search, $replace, $subject); // output: "MIKE AND JON LIKE PHP", which is correct
?>

down

mrrehbein at gmail dot com ¶

9 years ago

nikolaz dot tang at hotmail dot com's solution of using json_encode/decode is interesting, but a couple of issues to be aware of with it.

<?php
// From: nikolaz dot tang at hotmail dot com's post
function str_replace_json($search, $replace, $subject){
     return json_decode(str_replace($search, $replace,  json_encode($subject)));
}
?> 

json_decode will return objects, where arrays are probably expected.  This is easily remedied by adding 2nd parameter 'true' to json_decode.

$search and $replace could contain strings that match json encoding, which will either change the structure returned by this method, or break the json.

ie:
<?php
var_dump(str_replace_json('":"', '","', ['this' => 'stuff']));
var_dump(str_replace_json('this":"', 'this" : "thing", "with":"', ['this' => 'stuff']));
?>

down

David Holt ¶

8 years ago

Be aware that if you use this for filtering & sanitizing some form of user input, or remove ALL instances of a string, there's another gotcha to watch out for:

// Remove all double characters
$string="1001011010";
$string=str_replace(array("11","00"),"",$string);
// Output: "110010"

$string="<ht<html>ml> Malicious code </<html>html> etc";
$string=str_replace(array("<html>","</html>"),"",$string);
// Output: "<html> Malicious code </html> etc"

down

apmuthu at usa dot net ¶

14 years ago

If we have a html template that contains placeholders in curly braces that need to be replaced in runtime, the following function will do it using str_replace:

<?php

function parse_template($filename, $data) {
// example template variables {a} and {bc}
// example $data array
// $data = Array("a" => 'one', "bc" => 'two');
    $q = file_get_contents($filename);
    foreach ($data as $key => $value) {
        $q = str_replace('{'.$key.'}', $value, $q);
    }
    return $q;
}

?>

down

jbarnett at jmbelite dot com ¶

14 years ago

Might be worth mentioning that a SIMPLE way to accomplish Example 2 (potential gotchas) is to simply start your "replacements" in reverse.



So instead of starting from "A" and ending with "E":



<?php

$search  = array('A', 'B', 'C', 'D', 'E');

$replace = array('B', 'C', 'D', 'E', 'F');

// replaces A to B, B to C, C to D, D to E, E to F (makes them all F)

// start from "E" and end with "A":



$search  = array('E', 'D', 'C', 'B', 'A');

$replace = array('F', 'E', 'D', 'C', 'B');

// replaces E to F, D to E, C to D, B to C, A to B (prevents from

// multiple replacements of already replaced values)

?>



So basically start from the "end" and put the replacements in an order where the "replaced value" won't equal a value that exists later in the "search array".

down

jay_knows_(all)uk at hotmail dot com ¶

13 years ago

This strips out horrible MS word characters. 

Just keep fine tuning it until you get what you need, you'll see ive commented some out which caused problems for me.

There could be some that need adding in, but its a start to anyone who wishes to make their own custom function.

<?php

function msword_conversion($str) 
{ 
$str = str_replace(chr(130), ',', $str);    // baseline single quote
$str = str_replace(chr(131), 'NLG', $str);  // florin
$str = str_replace(chr(132), '"', $str);    // baseline double quote
$str = str_replace(chr(133), '...', $str);  // ellipsis
$str = str_replace(chr(134), '**', $str);   // dagger (a second footnote)
$str = str_replace(chr(135), '***', $str);  // double dagger (a third footnote)
$str = str_replace(chr(136), '^', $str);    // circumflex accent
$str = str_replace(chr(137), 'o/oo', $str); // permile
$str = str_replace(chr(138), 'Sh', $str);   // S Hacek
$str = str_replace(chr(139), '<', $str);    // left single guillemet
// $str = str_replace(chr(140), 'OE', $str);   // OE ligature
$str = str_replace(chr(145), "'", $str);    // left single quote
$str = str_replace(chr(146), "'", $str);    // right single quote
// $str = str_replace(chr(147), '"', $str);    // left double quote
// $str = str_replace(chr(148), '"', $str);    // right double quote
$str = str_replace(chr(149), '-', $str);    // bullet
$str = str_replace(chr(150), '-–', $str);    // endash
$str = str_replace(chr(151), '--', $str);   // emdash
// $str = str_replace(chr(152), '~', $str);    // tilde accent
// $str = str_replace(chr(153), '(TM)', $str); // trademark ligature
$str = str_replace(chr(154), 'sh', $str);   // s Hacek
$str = str_replace(chr(155), '>', $str);    // right single guillemet
// $str = str_replace(chr(156), 'oe', $str);   // oe ligature
$str = str_replace(chr(159), 'Y', $str);    // Y Dieresis
$str = str_replace('°C', '&deg;C', $str);    // Celcius is used quite a lot so it makes sense to add this in
$str = str_replace('£', '&pound;', $str); 
$str = str_replace("'", "'", $str);
$str = str_replace('"', '"', $str);
$str = str_replace('–', '&ndash;', $str);

return $str;
}

?>

down

matt wheaton ¶

18 years ago

As an effort to remove those Word copy and paste smart quotes, I've found that this works with UTF8 encoded strings (where $text in the following example is UTF8). Also the elipsis and em and en dashes are replaced.

There is an "invisible" character after the â€ for the right side double smart quote that doesn't seem to display here. It is chr(157).

<?php
  $find[] = 'â€œ';  // left side double smart quote
  $find[] = 'â€';  // right side double smart quote
  $find[] = 'â€˜';  // left side single smart quote
  $find[] = 'â€™';  // right side single smart quote
  $find[] = 'â€¦';  // elipsis
  $find[] = 'â€”';  // em dash
  $find[] = 'â€“';  // en dash

  $replace[] = '"';
  $replace[] = '"';
  $replace[] = "'";
  $replace[] = "'";
  $replace[] = "...";
  $replace[] = "-";
  $replace[] = "-";

  $text = str_replace($find, $replace, $text);
?>

down

pjcdawkins at googlemail dot com ¶

14 years ago

Here's a deep replace function allowing multi-dimensional arrays in $search, $replace and $subject. The keys and other structure of $subject are preserved.

<?php
// Auxiliary function:
function _replaceWithAnything($search,$replace,$subject){
  if(!is_array($search) || !is_array($replace)){
    $search=array($search);
    $replace=array($replace);
  }
  $match=array_search($subject,$search,true);
  if($match!==false && array_key_exists($match,$replace))
    $subject=$replace[$match];
  return $subject;
}

// Main function:
function deepReplace($search,$replace,$subject){
  if(!is_array($subject))
    return _replaceWithAnything($search,$replace,$subject);
  foreach($subject as &$val){
    if(is_array($val)){
      $val=deepReplace($search,$replace,$val);
      continue;
    }
    $val=_replaceWithAnything($search,$replace,$val);
  }
  return $subject;
}
?>

down

Denzel Morris ¶

12 years ago

Maybe obvious to veteran PHP programmers but less so to novice PHP programmers is the fact that this is invalid:
<?php
str_replace($search, $replace, $subject, 1);
?>
At a glance it appears to be a reasonable request, until you realize that the fourth parameter must be a variable in order to be passed as a reference. A replacement:
<?php
str_replace($search, $replace, $subject, $temp = 1);
// or
$temp = 1;
str_replace($search, $replace, $subject, $temp);
?>

down

Ing. Mirko Plazotta ¶

10 years ago

<?php
// a very beatiful way to do multiple replacements is this one, using just one array
$replaceThis = Array(
'old word' => 'new word',
'was' => 'it',
'past' => 'future',
);

$originalText = "every old word was a thing of the past...";
$replacedText = str_replace(array_keys($replaceThis), $replaceThis, $originalText);
echo $replacedText;
?>

down

Oyedele Hammed Horlah - itz dot harmid at gmail dot com ¶

7 years ago

this is a simple function to replace all newlines to <br> tags.

\r\n - windows line break
\n - linux line break
\r - mac line break

<?php
function nl_to_br($str) {
return str_replace(array("\r\n","\n","\r"), "<br/>", $str);
}
echo nl_to_br('Hello world\n I am Oyedele Hammed Horlah'); // => Hello World <br> I am Oyedele Hammed Horlah
?>

Enjoy

down

kriscraig at php dot net ¶

12 years ago

<?php



/**

 * Convert foreign 8859-1 characters into HTML entities.

 * 

 * @param string $str

 *   The string being parsed.

 * 

 * @return string

 *   The converted string.

 */

public static function convert_chars_to_entities( $str )

{

    $str = str_replace( 'À', '&#192;', $str );

    $str = str_replace( 'Á', '&#193;', $str );

    $str = str_replace( 'Â', '&#194;', $str );

    $str = str_replace( 'Ã', '&#195;', $str );

    $str = str_replace( 'Ä', '&#196;', $str );

    $str = str_replace( 'Å', '&#197;', $str );

    $str = str_replace( 'Æ', '&#198;', $str );

    $str = str_replace( 'Ç', '&#199;', $str );

    $str = str_replace( 'È', '&#200;', $str );

    $str = str_replace( 'É', '&#201;', $str );

    $str = str_replace( 'Ê', '&#202;', $str );

    $str = str_replace( 'Ë', '&#203;', $str );

    $str = str_replace( 'Ì', '&#204;', $str );

    $str = str_replace( 'Í', '&#205;', $str );

    $str = str_replace( 'Î', '&#206;', $str );

    $str = str_replace( 'Ï', '&#207;', $str );

    $str = str_replace( 'Ð', '&#208;', $str );

    $str = str_replace( 'Ñ', '&#209;', $str );

    $str = str_replace( 'Ò', '&#210;', $str );

    $str = str_replace( 'Ó', '&#211;', $str );

    $str = str_replace( 'Ô', '&#212;', $str );

    $str = str_replace( 'Õ', '&#213;', $str );

    $str = str_replace( 'Ö', '&#214;', $str );

    $str = str_replace( '×', '&#215;', $str );  // Yeah, I know.  But otherwise the gap is confusing.  --Kris

    $str = str_replace( 'Ø', '&#216;', $str );

    $str = str_replace( 'Ù', '&#217;', $str );

    $str = str_replace( 'Ú', '&#218;', $str );

    $str = str_replace( 'Û', '&#219;', $str );

    $str = str_replace( 'Ü', '&#220;', $str );

    $str = str_replace( 'Ý', '&#221;', $str );

    $str = str_replace( 'Þ', '&#222;', $str );

    $str = str_replace( 'ß', '&#223;', $str );

    $str = str_replace( 'à', '&#224;', $str );

    $str = str_replace( 'á', '&#225;', $str );

    $str = str_replace( 'â', '&#226;', $str );

    $str = str_replace( 'ã', '&#227;', $str );

    $str = str_replace( 'ä', '&#228;', $str );

    $str = str_replace( 'å', '&#229;', $str );

    $str = str_replace( 'æ', '&#230;', $str );

    $str = str_replace( 'ç', '&#231;', $str );

    $str = str_replace( 'è', '&#232;', $str );

    $str = str_replace( 'é', '&#233;', $str );

    $str = str_replace( 'ê', '&#234;', $str );

    $str = str_replace( 'ë', '&#235;', $str );

    $str = str_replace( 'ì', '&#236;', $str );

    $str = str_replace( 'í', '&#237;', $str );

    $str = str_replace( 'î', '&#238;', $str );

    $str = str_replace( 'ï', '&#239;', $str );

    $str = str_replace( 'ð', '&#240;', $str );

    $str = str_replace( 'ñ', '&#241;', $str );

    $str = str_replace( 'ò', '&#242;', $str );

    $str = str_replace( 'ó', '&#243;', $str );

    $str = str_replace( 'ô', '&#244;', $str );

    $str = str_replace( 'õ', '&#245;', $str );

    $str = str_replace( 'ö', '&#246;', $str );

    $str = str_replace( '÷', '&#247;', $str );  // Yeah, I know.  But otherwise the gap is confusing.  --Kris

    $str = str_replace( 'ø', '&#248;', $str );

    $str = str_replace( 'ù', '&#249;', $str );

    $str = str_replace( 'ú', '&#250;', $str );

    $str = str_replace( 'û', '&#251;', $str );

    $str = str_replace( 'ü', '&#252;', $str );

    $str = str_replace( 'ý', '&#253;', $str );

    $str = str_replace( 'þ', '&#254;', $str );

    $str = str_replace( 'ÿ', '&#255;', $str );

    

    return $str;

}

?>

down

Mohsin Ali (puregenius02 at gmail dot com) ¶

8 years ago

$myString = “It was the best of mine it was the worst of mine,”;
// Displays “It was the best of bananas, it was the worst of bananas,”
echo str_replace( “mine”, “bananas”, $myString );
If you want to know how many times the search string was replaced, pass in a variable as an optional
fourth argument. After the function runs, this variable holds the number of replacements:
$myString = “It was the best of mine, it was the worst of mine,”;
// Displays “It was the best of bananas, it was the worst of bananas,”
echo str_replace( “mine”, “bananas”, $myString, $num ) . “ < br/ > ”;
// Displays “The text was replaced 2 times.”
echo “The text was replaced $num times. < br/ > ”;

down

mbullard at accuvista dot co dot uk ¶

13 years ago

Insert space after comma.

If you have a form that stores results in a database field as comma separated values, when you display this data you can use the following to insert a space after each comma:

<?php
$find[] = ',';
$replace[] = '&#44;&nbsp;';
$text = str_replace($find, $replace, $row_rsRecordset['Field']);
print_r($text);
?>

Notes:
1) To get round the Replacement Order Gotcha, the comma is also replaced with its code equivalent: &#44;
2) You can adapt the $replace section to suit your needs: swap out the &nbsp; code with <br/> or replace comma and space with &nbsp;&middot;&nbsp; etc.

down

jefrey at forteras dot tech ¶

6 years ago

NEVER USE this function to protect against SQL Injection.

It may sound ridiculous but I've seen a couple of developers doing so.

It's interesting that these developers use str_replace (let's ignore the fact that they don't even use the str_ireplace which is case-insensitive) to remove common SQL commands such as "SELECT" or "DROP" from user-entered inputs.

A funny thing to note is that:

<?php
$input = "SELSELECTECT";
echo str_replace("SELECT", null, $input); // = SELECT
?>

Yeah you could loop it, but str_replace was never meant to be used this way. There are proper ways to protect against SQL Injections, such as using prepared statements (placeholders).

down

markem at sim1 dot us ¶

10 years ago

I was working with MySQL and displaying the title to things on the web page.  I'd written a script to ensure single and double quotes were removed from the title.  I used

    $title = str_replace( "'", "", $title );

and

     $title = str_replace( '"', "", $title );

But still the single and double quotes continued.  So I wrote a bit of code to print out each character separated by a dash.  Like so:

     for( $i=0; $i<strlen($title); $i++ ){
         echo "$i-";
         }

     echo "<br>\n";

This displayed:

     m-y-c-o-m-p-a-n-y- b-b-&-#-3-9-;-s

Which made me go "Oh!  I get it."

The MySQL function real_escape_string modifies the single quotes to be &#39; and double quotes as &#34;  These still show up as single and double quotes under HTML and most importantly - 

     JAVASCRIPT sees the &#34; and &#39; as actual single or double
     quotes.  So if you are passing arguments to a function you have
     to get rid of them or else you will get an error on trying to call
     a given function.  Example:

     <a href="javascript:func1('mycompany bbs&#39;s")'">

     becomes

     <a href="javascript:func1('mycompany bbs's');">

Which then will give you an error because there is a single quote inside of the single quoted string.  HOWEVER, the

     $title = str_replace( "'", "", $title );

WILL NOT FIND a single quote.  Instead, you have to do this:

     $title = str_replace( "&#39;", "'", $title );
and
     $title = str_relace( "&#34;", '"', $title );

(Or you could just get rid of them.)

So remember!  If you are trying to remove single and double quotes and are using MySQL and MySQL's real_escape_string() function that you might be having single and double quotes hanging around which are defined as &#39; and &#34; but which show up as single and double quotes as well as causing problems in your Javascripts.

down

-1

flame2000 at mail dot ru ¶

8 years ago

Replace chars in multi-byte string.
In example, replacing 'f'=>'b', 'o'=>'e', 't'=>'r' and etc.

<?php
function mb_chars_replace($from, $to, $subj, $delSymb='_') {
     $nsubj='';
     preg_match_all('/(.)/u', $subj, $subj);$subj=$subj[1];
     if (!is_array($from)) {preg_match_all('/(.)/u', $from, $from);$from=$from[1];} 
     if (!is_array($to)) {preg_match_all('/(.)/u', $to, $to);$to=$to[1];}
     if (count($from)!==count($to)) return false;

     foreach($subj as $s) {
       foreach($from as $k=>$f) {
         if($s===$f) {
                    $s=$to[$k];
                    break;
         }
       }
       if($s!==$delSymb) $nsubj.=$s;
     }
    return $nsubj;
} 

//examples:

$from="fotber, ";
$to="berfot+_";

// or

$from=array("f","o","t","b","e","r",","," ");
$to=array("b","e","r","f","o","t","+","_");

//out:
echo mb_chars_replace($from,$to,"foot, beer"); //beer+foot
?>

down

-1

cc at cc dot com ¶

12 years ago

I found a pretty low tech solution to avoid the "gotcha" without worrying about the array order of how things are replaced. I could not "order" the replacement array easily because it was being read from a database table.

Anyway if you add an identifiable token to each replaced word, then just filter this out at the very end, no nested search terms are found. I just dynamically add the %% after the first char of each word before pumping it into the str_ireplace function.

$find = array("as1", "as2", "as3", "flex");
$replace = array("<a href = \"#as1\">A%%uto S%%entry R%%ev. A%%</a>", "<a href = \"#as2\">A%%uto S%%entry E%%xp</a>", "<a href = \"#as3\">A%%uto S%%entry f%%lex</a>", "<a style = \"color: red;\" href = \"#flex\">f%%lex</a>");
$text = str_ireplace($find, $replace, $text);
echo str_ireplace("%%", "", $text);

In this case I am using %% as my token as this is an unlikely char combo for me.

down

-2

christof dot rieger at r-tron dot de ¶

12 years ago

In many countries the numeric format is 1.000,33 in english it is 1,000.33

This function converts numeric arguments always into the PHP confirm numeric format. If only one seperator is into the numericstring so it is interpreted as the decimalpoint.

 function dp($zahl)
{
  if ((strpos($zahl,".") > "-1") | (strpos($zahl,",") > "-1")) {
    if ((strpos($zahl,".") > "-1") & (strpos($zahl,",") > "-1")) {
      if (strpos($zahl,".") > strpos($zahl,",")){
          return str_replace(",","",$zahl);
    } else {
          return str_replace(",",".",str_replace(".","",$zahl));
      }
  } else {
      if (strpos($zahl,".") > "-1") {
        if (strpos($zahl,".") == strrpos($zahl,".")) {
            return $zahl;
      } else {
          return str_replace(".","",$zahl);          
        } 
    } else {
        if (strpos($zahl,",") == strrpos($zahl,",")) {
          return str_replace(",",".",$zahl);
      } else {
          return str_replace(",","",$zahl);          
        } 
    } }
} else {
    return $zahl;
} }

down

-2

borasahin at gmail dot com ¶

9 years ago

jSON Turkish Characters Problem - (PHP < 5.4 for example)

<?php
function json_decode_tr($json){
       $json_char = array("u00e7","u0131","u00fc","u011f","u00f6","u015f","u0130","u011e","u00dc","u00d6","u015e","u00c7");
       $turkish = array("ç","ı","ü","ğ","ö","ş","İ","Ğ","Ü","Ö","Ş","Ç");
       $result = str_replace($json_char, $turkish, $json);
       return json_decode($json);
    }
?>

down

-3

Anonymous ¶

11 years ago

@moostende at gmail dot com
If you want to remove all dashes but one from the string '-aaa----b-c-----d--e---f' resulting in '-aaa-b-c-d-e-f', you CAN use str_replace !

<?php
function foo($str)
{
    do {
        $str = str_replace("--", "-", $str, $count);
    } while ($count > 0);
    return $str;
}
echo foo("-aaa----b-c-----d--e---f");
?>

This outputs the following: 
-aaa-b-c-d-e-f

down

-2

ASchmidt at Anamera dot net ¶

6 years ago

Escaping strings with control characters, quotes and backslashes for subsequent use in MySQL commands.

MySQL has documented a number of backslash escape sequences that need to be used to pass certain values in SQL commands: https://dev.mysql.com/doc/refman/5.7/en/string-literals.html

It's crucial to escape existing backslashes first to prevent double-escaping, before escaping the various control sequences:

<?php
$result = str_replace(
                array( '\\',    "\0",   "'",    "\x8" /* BS */, "\n",   "\r",   "\t",   "\x1A" /* Ctrl+Z */ ),
                array( '\\\\',  '\\0',  '\\\'', '\\b',          '\\n',  '\\r',  '\\t',  '\\Z' ),
                $value );
?>

This code is NOT intended to protect against SQL insertions, it's intended to PRESERVE string content correctly, if it contains control characters.

down

-2

hyperzlib at outlook dot com ¶

4 years ago

Use str_replace to remove all dashes but one from the string '-aaa----b-c-----d--e---f' (resulting is: '-aaa-b-c-d-e-f')

<?php
$challenge = '-aaa----b-c-----d--e---f';
do $challenge = str_replace('--', '-', $challenge, $count); while($count);
echo $challenge;
?>

down

-4

christian dot reinecke at web dot de ¶

14 years ago

If you need to replace a string in another, but only once but still in all possible combinations (f.e. to replace "a" with "x" in "aba" to get array("xba", "abx")) you can use this function:
<?php
function getSingleReplaceCombinations($replace, $with, $inHaystack)
{
    $splits = explode($replace, $inHaystack);
    $result = array();
    for ($i = 1, $ix = count($splits); $i < $ix; ++$i) {
        $previous = array_slice($splits, 0, $i);
        $next     = array_slice($splits, $i);
        
        $combine  = array_pop($previous) . $with . array_shift($next);
        $result[] = implode($replace, array_merge($previous, array($combine), $next));
    }
    return $result;
}
var_dump(getSingleReplaceCombinations("a", "x", "aba")); // result as mentioned above
?>
It may not be the best in performance, but it works.

down

-5

vuabid at hotmail dot com ¶

7 years ago

Consider this while using str_replace function when $search and $replace are arrays.

$search = array( 'login_reactivate', 'login_reactivate_date' );
$replace = array( 'login reactivate status', 'login reactivate date' );
$subject = "fname, email, login_reactivate, login_reactivate_date";

$returnValue = str_replace( $search, $replace, $subject );

$returnValue will be:
fname, email, login reactivate status, login reactivate status_date

You can see we are expecting "login_reactivate_date" to be replaced with "login reactivate date" but it will replace to "login reactivate status_date"

＋add a note