International PHP Conference Berlin 2025

ip2long

(PHP 4, PHP 5, PHP 7, PHP 8)

ip2long将 IPV4 的字符串互联网协议转换成长整型数字

说明

ip2long(string $ip): int|false

函数 ip2long() 返回 IPV4 网络地址的长整型格式,从标准网络地址格式(点字符串)转化得到。

ip2long() 还可以与非完整IP进行工作。阅读 » http://ps-2.kev009.com/wisclibrary/aix52/usr/share/man/info/en_US/a_doc_lib/libs/commtrf2/inet_addr.htm 获得更多信息。

参数

ip

一个标准格式的地址。

返回值

返回IP地址转换后的数字,如果 ip 无效,则为 false

示例

示例 #1 ip2long() 例子

<?php
$ip
= gethostbyname('www.example.com');
$out = "The following URLs are equivalent:<br />\n";
$out .= 'http://www.example.com/, http://' . $ip . '/, and http://' . sprintf("%u", ip2long($ip)) . "/<br />\n";
echo
$out;
?>

示例 #2 显示 IP 地址

第二个例子说明使用 printf() 打印转换后的地址:

<?php
$ip
= gethostbyname('www.example.com');
$long = ip2long($ip);

if (
$long == -1 || $long === FALSE) {
echo
'Invalid IP, please try again';
} else {
echo
$ip . "\n"; // 192.0.34.166
echo $long . "\n"; // 3221234342 (-1073732954 32 位系统,整型溢出)
printf("%u\n", ip2long($ip)); // 3221234342
}
?>

注释

注意:

因为 PHP 的 int 类型是有符号,并且有许多的 IP 地址将导致在 32 位系统的情况下为负数,你需要使用“%u”进行转换通过 sprintf()printf() 得到的字符串来表示无符号的 IP 地址。

注意:

由于整数值溢出,ip2long() 将为 32 位系统上的 IP 255.255.255.255 返回 -1

参见

  • long2ip() - 将长整型转化为字符串形式带点的互联网标准格式地址(IPV4)
  • sprintf() - 返回格式化字符串

添加备注

用户贡献的备注 25 notes

up
32
joe at joeceresini dot com
15 years ago
A quick method to convert a netmask (ex: 255.255.255.240) to a cidr mask (ex: /28):

<?php
function mask2cidr($mask){
$long = ip2long($mask);
$base = ip2long('255.255.255.255');
return
32-log(($long ^ $base)+1,2);

/* xor-ing will give you the inverse mask,
log base 2 of that +1 will return the number
of bits that are off in the mask and subtracting
from 32 gets you the cidr notation */

}
?>
up
19
Mike B
7 years ago
<?php
/*
Given an IP address and Subnet Mask,
determine the subnet address, broadcast address, and wildcard mask
by using bitwise operators

ref: http://php.net/manual/en/language.operators.bitwise.php
*/

$ip='10.10.10.7';
$mask='255.255.255.0';
$wcmask=long2ip( ~ip2long($mask) );
$subnet=long2ip( ip2long($ip) & ip2long($mask) );
$bcast=long2ip( ip2long($ip) | ip2long($wcmask) );
echo
"Given address $ip and mask $mask, \n" .
"the subnet is $subnet and broadcast is $bcast \n" .
"with a wildcard mask of $wcmask";

/*
Given address 10.10.10.7 and mask 255.255.255.0,
the subnet is 10.10.10.0 and broadcast is 10.10.10.255
with a wildcard mask of 0.0.0.255
*/

?>
up
14
php dot net at kenman dot net
16 years ago
To nate, who advises that there is no reason to use an unsigned version of the IP in a MySQL DB:

I think it would depend on your application, but personally, I find it useful to store IP's as unsigneds since MySQL has 2 native functions, INET_ATON() and INET_NTOA(), which work the same as ip2long()/long2ip() _except_ that they generate the unsigned counterpart. So if you want, you could do:

-- IANA Class-B reserved/private
SELECT * FROM `servers`
WHERE `ip` >= INET_ATON('192.168.0.0')
AND `ip` <= INET_ATON('192.168.255.255');

In my current application, I find it easier to use the MySQL built-ins than the PHP counter-parts.

In case you're curious as to the names ATON and NTOA:

ATON = address to number aka. ip2long
NTOA = number to address aka. long2ip
up
6
ir on ir id is at gm ai ld ot co m
17 years ago
Keep in mind that storing IP addresses inside of your database as integers (rather than 15 character strings in decimal format, or 8 character strings in hex format) is hundreds of times faster.

Take the typical case of a MySQL database doing a search for an IP address on thousands (or millions!) of rows; you're either doing a string compare for each entry, or an integer equation. If you do your indexes correctly, your lookups should be literally 100x faster using an INT rather than a VARCHAR.

Also note that an integer doesn't need to be escaped when passed to a database. :)
up
10
david dot schueler at tel-billig dot de
15 years ago
To get the network adress out of the broadcast adress and netmask just to an AND on it:

<?php
// simple example
$bcast = ip2long("192.168.178.255");
$smask = ip2long("255.255.255.0");
$nmask = $bcast & $smask;
echo
long2ip($nmask); // Will give 192.168.178.0
?>

With this example you are able to check if a given host is in your own local net or not (on linux):

<?php
/**
* Check if a client IP is in our Server subnet
*
* @param string $client_ip
* @param string $server_ip
* @return boolean
*/
function clientInSameSubnet($client_ip=false,$server_ip=false) {
if (!
$client_ip)
$client_ip = $_SERVER['REMOTE_ADDR'];
if (!
$server_ip)
$server_ip = $_SERVER['SERVER_ADDR'];
// Extract broadcast and netmask from ifconfig
if (!($p = popen("ifconfig","r"))) return false;
$out = "";
while(!
feof($p))
$out .= fread($p,1024);
fclose($p);
// This is because the php.net comment function does not
// allow long lines.
$match = "/^.*".$server_ip;
$match .= ".*Bcast:(\d{1,3}\.\d{1,3}i\.\d{1,3}\.\d{1,3}).*";
$match .= "Mask:(\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3})$/im";
if (!
preg_match($match,$out,$regs))
return
false;
$bcast = ip2long($regs[1]);
$smask = ip2long($regs[2]);
$ipadr = ip2long($client_ip);
$nmask = $bcast & $smask;
return ((
$ipadr & $smask) == ($nmask & $smask));
}
?>
up
3
spinyn at gmail dot com
15 years ago
Just want to add a comment to kaputt's valuable contribution to the task of matching hosts to ip ranges, efficiently. The script works fine if the binary representation of the ip involves no leading zeros. Unfortunately, the way decbin() seems to work, leading zeros in the binary representation of the first ip quad get dropped. That is a serious matter if you're trying to match all possible candidates in the checklist. In those cases the leading zeros need to be added back to get accurate matches for values in the first quad between 0-127 (or the binary equivalent, 0-01111111).

The solution I came up with to address this issue was the following function:

<?php
function addLeadingZero($ip) {
if ((
$result = (32 - strlen($ip))) > 0)
return
str_repeat("0", $result).$ip;
}
?>
up
3
one tiger one at gee mail dot comm
17 years ago
I wrote a small function to validate a netmask (We have a form where the netmask of a given server is entered in, and I wanted to make sure it was valid). Hope this is useful.

<?php
// Netmask Validator //
function checkNetmask($ip) {
if (!
ip2long($ip)) {
return
false;
} elseif(
strlen(decbin(ip2long($ip))) != 32 && ip2long($ip) != 0) {
return
false;
} elseif(
ereg('01',decbin(ip2long($ip))) || !ereg('0',decbin(ip2long($ip)))) {
return
false;
} else {
return
true;
}
}
?>
up
5
Karl Rixon
10 years ago
The manual states that "ip2long() will also work with non-complete IP addresses", however this is system-dependant so cannot be relied upon. For example, on my system ip2long() will return FALSE for incomplete addresses:

<?php
var_dump
(ip2long("255.255")); // bool(false)
?>

This is because ip2long will use inet_pton if available, which does not support non-complete addresses. If inet_pton is not available on your system, inet_addr will be used and incomplete addresses will work as stated.
up
2
jpmarcotte at gmail dot com
16 years ago
In using a combination of jbothe's code below and some of the "$mask = 0xFFFFFFFF << (32 - $bits)" type code, I ran into an error with some later calculations on a 64 bit machine.

Keep in mind that when you're analyzing numbers meant to be treated as 32 bits wide (such as IP addresses), you may want to truncate them. Without relying on other libraries, it was simple enough to follow any calculations that may end with different results on a 64 bit machine with " & 0xFFFFFFFF"

Though in many cases, it seems like it might be simpler to just use "~0 << ..." for initial shifting to create the network mask instead of "0xFFFFFFFF << ...". I don't know that it guarantees further operations to work as expected though.
up
3
Aleksey Kuznetsov
12 years ago
Unfortunately sprintf('%u', ...) is low and returns string representation of integer value instead of integer.
Here is a function I use to convert IP to mySQL-compatible signed integer:

function ip2int($ip) {
if (!$r = ip2long($ip)) return 0; // we want 0 instead of false, even in case of bad IP
if ($r > 2147483647)
$r-= 4294967296;
return $r; // ok
}
up
4
replay111 at tlen dot pl
12 years ago
Hi,
based on examples above I have mixed class IPFilter with netMatch function wich gives me complete class for IP4 check including CIDR IP format:

<?php
class IP4Filter {

private static
$_IP_TYPE_SINGLE = 'single';
private static
$_IP_TYPE_WILDCARD = 'wildcard';
private static
$_IP_TYPE_MASK = 'mask';
private static
$_IP_TYPE_CIDR = 'CIDR';
private static
$_IP_TYPE_SECTION = 'section';
private
$_allowed_ips = array();

public function
__construct($allowed_ips) {
$this->_allowed_ips = $allowed_ips;
}

public function
check($ip, $allowed_ips = null) {
$allowed_ips = $allowed_ips ? $allowed_ips : $this->_allowed_ips;

foreach (
$allowed_ips as $allowed_ip) {
$type = $this->_judge_ip_type($allowed_ip);
$sub_rst = call_user_func(array($this, '_sub_checker_' . $type), $allowed_ip, $ip);

if (
$sub_rst) {
return
true;
}
}

return
false;
}

private function
_judge_ip_type($ip) {
if (
strpos($ip, '*')) {
return
self :: $_IP_TYPE_WILDCARD;
}

if (
strpos($ip, '/')) {
$tmp = explode('/', $ip);
if (
strpos($tmp[1], '.')) {
return
self :: $_IP_TYPE_MASK;
} else {
return
self :: $_IP_TYPE_CIDR;
}
}

if (
strpos($ip, '-')) {
return
self :: $_IP_TYPE_SECTION;
}

if (
ip2long($ip)) {
return
self :: $_IP_TYPE_SINGLE;
}

return
false;
}

private function
_sub_checker_single($allowed_ip, $ip) {
return (
ip2long($allowed_ip) == ip2long($ip));
}

private function
_sub_checker_wildcard($allowed_ip, $ip) {
$allowed_ip_arr = explode('.', $allowed_ip);
$ip_arr = explode('.', $ip);
for (
$i = 0; $i < count($allowed_ip_arr); $i++) {
if (
$allowed_ip_arr[$i] == '*') {
return
true;
} else {
if (
false == ($allowed_ip_arr[$i] == $ip_arr[$i])) {
return
false;
}
}
}
}

private function
_sub_checker_mask($allowed_ip, $ip) {
list(
$allowed_ip_ip, $allowed_ip_mask) = explode('/', $allowed_ip);
$begin = (ip2long($allowed_ip_ip) & ip2long($allowed_ip_mask)) + 1;
$end = (ip2long($allowed_ip_ip) | (~ ip2long($allowed_ip_mask))) + 1;
$ip = ip2long($ip);
return (
$ip >= $begin && $ip <= $end);
}

private function
_sub_checker_section($allowed_ip, $ip) {
list(
$begin, $end) = explode('-', $allowed_ip);
$begin = ip2long($begin);
$end = ip2long($end);
$ip = ip2long($ip);
return (
$ip >= $begin && $ip <= $end);
}

private function
_sub_checker_CIDR($CIDR, $IP) {
list (
$net, $mask) = explode('/', $CIDR);
return (
ip2long($IP) & ~((1 << (32 - $mask)) - 1) ) == ip2long($net);
}

}
?>

For me this code works great, so I wanna thank to all You guys!!!
up
1
schat
5 years ago
sorry i just wrote wrong, sorry. this is the right one. thanks.

<?php
/**
* convert cidr to ip range
* From: <https://github.com/www-schat-top>
* @param string $cidr "192.168.0.0/23"
* @return array ["192.168.0.0", "192.168.1.255"]
*/
function cidr2range($cidr){
list(
$subnet, $mask ) = explode( '/', $cidr );
return [
$subnet, long2ip(ip2long( $subnet ) | (pow(2,( 32 - $mask ))-1))];
}
?>
up
3
jwadhams1 at yahoo dot com
15 years ago
I wanted to build on what kaputt and spinyn contributed in a way that I think is a little more intuitive (e.g., let sprintf do all the binary conversion and padding, and let substr_compare do the trimming and comparing):

<?php
function ip_in_network($ip, $net_addr, $net_mask){
if(
$net_mask <= 0){ return false; }
$ip_binary_string = sprintf("%032b",ip2long($ip));
$net_binary_string = sprintf("%032b",ip2long($net_addr));
return (
substr_compare($ip_binary_string,$net_binary_string,0,$net_mask) === 0);
}

ip_in_network("192.168.2.1","192.168.2.0",24); //true
ip_in_network("192.168.6.93","192.168.0.0",16); //true
ip_in_network("1.6.6.6","128.168.2.0",1); //false
?>
up
2
rasmus at mindplay dot dk
11 years ago
As pointed out by others, this function's return value is not consistent on 32 and 64-bit platforms.

Your best bet for consistent behavior across 32/64-bit platforms (and Windows) is the lowest common denominator: force the return value of ip2long() into a signed 32-bit integer, e.g.:

var_dump(unpack('l', pack('l', ip2long('255.255.255.0'))));

This looks idiotic, but it gives you a consistent signed integer value on all platforms.

(the arguments to both pack() and unpack() are the lower-case letter "L", not the number "1", in case it looks that way on your screen...)
up
1
oo dot para at gmail dot com
10 years ago
If you want to validate IPs using this function, please be careful:
The function filter_var should be used instead for validating IPs.

<?php
$ip
= '192.168.0355.24';
var_dump(ip2long($ip) !== false); // true (expected false)
var_dump(filter_var($ip, FILTER_VALIDATE_IP) !== false); // false

$ip = '192.168.355.24';
var_dump(ip2long($ip) !== false); // false
var_dump(filter_var($ip, FILTER_VALIDATE_IP) !== false); // false
?>
up
1
PandoraBox2007 at gmail dot com
13 years ago
Universal ip4/ip6

<?php
// encoded --
function encode_ip ($ip)
{
$d = explode('.', $ip);
if (
count($d) == 4) return sprintf('%02x%02x%02x%02x', $d[0], $d[1], $d[2], $d[3]);

$d = explode(':', preg_replace('/(^:)|(:$)/', '', $ip));
$res = '';
foreach (
$d as $x)
$res .= sprintf('%0'. ($x == '' ? (9 - count($d)) * 4 : 4) .'s', $x);
return
$res;
}

// decoded
function decode_ip($int_ip)
{
function
hexhex($value) { return dechex(hexdec($value)); };

if (
strlen($int_ip) == 32) {
$int_ip = substr(chunk_split($int_ip, 4, ':'), 0, 39);
$int_ip = ':'. implode(':', array_map("hexhex", explode(':',$int_ip))) .':';
preg_match_all("/(:0)+/", $int_ip, $zeros);
if (
count($zeros[0]) > 0) {
$match = '';
foreach(
$zeros[0] as $zero)
if (
strlen($zero) > strlen($match))
$match = $zero;
$int_ip = preg_replace('/'. $match .'/', ':', $int_ip, 1);
}
return
preg_replace('/(^:([^:]))|(([^:]):$)/', '$2$4', $int_ip);
}
$hexipbang = explode('.', chunk_split($int_ip, 2, '.'));
return
hexdec($hexipbang[0]). '.' . hexdec($hexipbang[1]) . '.' . hexdec($hexipbang[2]) . '.' . hexdec($hexipbang[3]);
}
?>

DB:
`user_ip` varchar(32) DEFAULT NULL
up
2
f dot wiessner at smart-weblications dot net
15 years ago
Here some working ip2long6 and long2ip6 functions - keep in mind that this needs php gmp-lib:

<?php

$ipv6
= "2001:4860:a005::68";

function
ip2long6($ipv6) {
$ip_n = inet_pton($ipv6);
$bits = 15; // 16 x 8 bit = 128bit
while ($bits >= 0) {
$bin = sprintf("%08b",(ord($ip_n[$bits])));
$ipv6long = $bin.$ipv6long;
$bits--;
}
return
gmp_strval(gmp_init($ipv6long,2),10);
}

function
long2ip6($ipv6long) {

$bin = gmp_strval(gmp_init($ipv6long,10),2);
if (
strlen($bin) < 128) {
$pad = 128 - strlen($bin);
for (
$i = 1; $i <= $pad; $i++) {
$bin = "0".$bin;
}
}
$bits = 0;
while (
$bits <= 7) {
$bin_part = substr($bin,($bits*16),16);
$ipv6 .= dechex(bindec($bin_part)).":";
$bits++;
}
// compress

return inet_ntop(inet_pton(substr($ipv6,0,-1)));
}

print
$ipv6long = ip2long6($ipv6)."\n";
print
$ipv6 = long2ip6($ipv6long)."\n";

?>

outputs:

42541956150894553250710573749450571880
2001:4860:a005::68
up
1
Ian B
17 years ago
NOTE: ip2long() should NOT be used for CIDR calculation.
Instead, you should use something like the following:

<?php
/* get the base and the bits from the ban in the database */
list($base, $bits) = explode('/', $CIDR);

/* now split it up into it's classes */
list($a, $b, $c, $d) = explode('.', $base);

/* now do some bit shfiting/switching to convert to ints */
$i = ($a << 24) + ($b << 16) + ($c << 8) + $d;
$mask = $bits == 0 ? 0 : (~0 << (32 - $bits));

/* here's our lowest int */
$low = $i & $mask;

/* here's our highest int */
$high = $i | (~$mask & 0xFFFFFFFF);

/* now split the ip were checking against up into classes */
list($a, $b, $c, $d) = explode('.', $iptocheck);

/* now convert the ip we're checking against to an int */
$check = ($a << 24) + ($b << 16) + ($c << 8) + $d;

/* if the ip is within the range, including
highest/lowest values, then it's witin the CIDR range */
if ($check >= $low && $check <= $high)
return
1;
else
return
0;
?>

This means that you should check to see if the IP
address is of the correct format each time.
up
2
pink at pink dot art dot pl
12 years ago
Be aware when you're running 64bit system, ip2long will result 64 bit integer which doesn't fit in MySQL INT, you can use BIGINT or INT UNSIGNED because on 64bit systems ip2long will never return negative integer. See also https://bugs.php.net/bug.php?id=54338
up
1
Anonymous
20 years ago
I re-wrote the functions from jbothe at hotmail dot com as a little exercise in OO and added a couple of extra functions.

<?php

//--------------
// IPv4 class
class ipv4
{
var
$address;
var
$netbits;

//--------------
// Create new class
function ipv4($address,$netbits)
{
$this->address = $address;
$this->netbits = $netbits;
}

//--------------
// Return the IP address
function address() { return ($this->address); }

//--------------
// Return the netbits
function netbits() { return ($this->netbits); }

//--------------
// Return the netmask
function netmask()
{
return (
long2ip(ip2long("255.255.255.255")
<< (
32-$this->netbits)));
}

//--------------
// Return the network that the address sits in
function network()
{
return (
long2ip((ip2long($this->address))
& (
ip2long($this->netmask()))));
}

//--------------
// Return the broadcast that the address sits in
function broadcast()
{
return (
long2ip(ip2long($this->network())
| (~(
ip2long($this->netmask())))));
}

//--------------
// Return the inverse mask of the netmask
function inverse()
{
return (
long2ip(~(ip2long("255.255.255.255")
<< (
32-$this->netbits))));
}

}

$ip = new ipv4("192.168.2.1",24);
print
"Address: $ip->address()\n";
print
"Netbits: $ip->netbits()\n";
print
"Netmask: $ip->netmask()\n";
print
"Inverse: $ip->inverse()\n";
print
"Network: $ip->network()\n";
print
"Broadcast: $ip->broadcast()\n";
?>
up
2
admin at wudimei dot com
12 years ago
<?php

/**
*
*get the first ip and last ip from cidr(network id and mask length)
* i will integrate this function into "Rong Framework" :)
* @author admin@wudimei.com
* @param string $cidr 56.15.0.6/16 , [network id]/[mask length]
* @return array $ipArray = array( 0 =>"first ip of the network", 1=>"last ip of the network" );
* Each element of $ipArray's type is long int,use long2ip( $ipArray[0] ) to convert it into ip string.
* example:
* list( $long_startIp , $long_endIp) = getIpRange( "56.15.0.6/16" );
* echo "start ip:" . long2ip( $long_startIp );
* echo "<br />";
* echo "end ip:" . long2ip( $long_endIp );
*/

function getIpRang( $cidr) {

list(
$ip, $mask) = explode('/', $cidr);

$maskBinStr =str_repeat("1", $mask ) . str_repeat("0", 32-$mask ); //net mask binary string
$inverseMaskBinStr = str_repeat("0", $mask ) . str_repeat("1", 32-$mask ); //inverse mask

$ipLong = ip2long( $ip );
$ipMaskLong = bindec( $maskBinStr );
$inverseIpMaskLong = bindec( $inverseMaskBinStr );
$netWork = $ipLong & $ipMaskLong;

$start = $netWork+1;//去掉网络号 ,ignore network ID(eg: 192.168.1.0)

$end = ($netWork | $inverseIpMaskLong) -1 ; //去掉广播地址 ignore brocast IP(eg: 192.168.1.255)
return array( $start, $end );
}
?>
up
2
alex at alex-at dot ru
8 years ago
Here are my versions of prefix to mask and mask to prefix conversions. You can remove first lines with if/preg of each function if you don't want sanity precheck.

function prefix2Mask($prefix)
{
if (!preg_match('#^(?:0*[0-2]?[0-9]|3[0-2])$#', $prefix)) return false; # wrong prefix
return long2ip(0xffffffff << (32 - $prefix));
}

function mask2Prefix($mask)
{
if (!preg_match('#^(?:(?:[0-1][0-9][0-9]|2[0-4][0-9]|25[0-5]|[0-9][0-9]|[0-9])\.){3}'.
'(?:[0-1][0-9][0-9]|2[0-4][0-9]|25[0-5]|[0-9][0-9]|[0-9])$#', $mask))
return false; # wrong mask
$m2p = str_pad(substr(decbin(ip2long($mask)), -32, 32), 32, '0', STR_PAD_LEFT);
if (!preg_match('#^(1*)0*$#', $m2p, $m)) return false; # wrong mask
return strlen($m[1]);
}
up
2
laacz at php dot net
17 years ago
Just to save you some time.

Beware that octets in IP address are being treated as numbers. So, '10.0.0.11' is not equal to '10.0.0.011'. '011' is octal number (base 8), so it converts to '9'. You can even go further and see that '10.0.0.0xa' also works (equals to '10.0.0.16').

This is not PHP issue, though.
up
0
chrisp-phpnet at inventivedingo dot com
16 years ago
I had a problem with calling this function with REMOTE_ADDR on my lighttpd web server. Turned out that IPv6 was installed on this server, so even though REMOTE_ADDR was an IPv4 address, it was being formatted using IPv6's IPv4 compatibility mode. For example, 10.0.0.1 was becoming ::ffff:10.0.0.1, which caused iplong to report the address as invalid instead of parsing it correctly.

The correct fix would of course be to update my infrastructure so that it's properly IPv6-compatible; but in the context of my particular situation, this would involve a lot of re-engineering. So in the meantime, I worked around the issue using this quick and dirty hack:

<?php
$ip
= htmlspecialchars($_SERVER['REMOTE_ADDR']);
if (
strpos($ip, '::') === 0) {
$ip = substr($ip, strrpos($ip, ':')+1);
}
$host = ip2long($ip);
?>

Ugly but functional.
up
0
ken at expitrans dot com
19 years ago
Below is a merged form of all various notes, and a better (and correct) network matching function.

<?php

function net_match($network, $ip) {
// determines if a network in the form of 192.168.17.1/16 or
// 127.0.0.1/255.255.255.255 or 10.0.0.1 matches a given ip
$ip_arr = explode('/', $network);
$network_long = ip2long($ip_arr[0]);

$x = ip2long($ip_arr[1]);
$mask = long2ip($x) == $ip_arr[1] ? $x : 0xffffffff << (32 - $ip_arr[1]);
$ip_long = ip2long($ip);

// echo ">".$ip_arr[1]."> ".decbin($mask)."\n";
return ($ip_long & $mask) == ($network_long & $mask);
}

echo
net_match('192.168.17.1/16', '192.168.15.1')."\n"; // returns true
echo net_match('127.0.0.1/255.255.255.255', '127.0.0.2')."\n"; // returns false
echo net_match('10.0.0.1', '10.0.0.1')."\n"; // returns true

?>
To Top