PHP 8.3.4 Released!

posix_getpwuid

(PHP 4, PHP 5, PHP 7, PHP 8)

posix_getpwuidLiefert zu einer Benutzer-ID Informationen über diesen Benutzer

Beschreibung

posix_getpwuid(int $user_id): array|false

Gibt ein Array mit Informationen über den Benutzer zurück, auf die die angegebene ID verweist.

Parameter-Liste

user_id

Die Benutzerkennung

Rückgabewerte

Gibt ein assoziatives Array mit den folgenden Elementen zurück:

Das Benutzerinformation-Array
Element Beschreibung
name Das name-Element enthält den Benutzernamen. Es handelt sich dabei nicht um den wirklichen, kompletten Namen, sondern um einen kurzen "Bezeichner" des Benutzers mit normalerweise weniger als 16 Zeichen.
passwd Das passwd-Element enthält das verschlüsselte Passwort des Benutzers. Häufig, zum Beispiel wenn auf einem System "shadow"-Passwörter verwendet werden, wird stattdessen ein Sternchen zurückgegeben.
uid Die Benutzer-ID sollte die selbe wie der Parameter user_id sein und ist von daher redundant.
gid Die Gruppen-ID des Benutzers. Benutzen Sie die Funktion posix_getgrgid(), um den Gruppennamen und eine Liste der Gruppenmitglieder aufzulösen.
gecos GECOS ist ein veralteter Begriff, der sich auf das finger-Informationsfeld auf einem Honeywell-Stapelverarbeitungssystem bezieht. Das Feld gibt es aber immer noch und sein Inhalt wurde durch POSIX formalisiert. Es enthält eine durch Komma getrennte Liste, bestehend aus dem kompletten Namen des Benutzers, der Telefonnummer des Büros, der Zimmernummer des Büros und der privaten Telefonnummer. Auf den meisten Systemen ist nur der komplette Name des Benutzers verfügbar.
dir Dieses Element enthält den absoluten Pfad des Homeverzeichnisses des Benutzers.
shell Das shell-Element enthält den absoluten Pfad zur standardmäßigen Shell des Benutzers.
Falls ein Fehler auftritt, gibt die Funktion false zurück.

Beispiele

Beispiel #1 posix_getpwuid()-Beispiel

<?php

$benutzerinfo
= posix_getpwuid(10000);

print_r($benutzerinfo);
?>

Das oben gezeigte Beispiel erzeugt eine ähnliche Ausgabe wie:

Array
(
    [name]    => tom
    [passwd]  => x
    [uid]     => 10000
    [gid]     => 42
    [gecos]   => "tom,,,"
    [dir]     => "/home/tom"
    [shell]   => "/bin/bash"
)

Siehe auch

  • posix_getpwnam() - Liefert zu einem Benutzernamen Informationen über diesen Benutzer
  • POSIX GETPWNAM(3)-Manpage

add a note

User Contributed Notes 7 notes

up
8
ddascalescu at gmail dot com
15 years ago
Correction regarding my note below: get_current_user() does *not* get the name of the user the script is running as. Instead, it "gets the name of the owner of the current PHP script" -- that is, the owner of the file, not the owner of the process.

To properly get the running user, test if function_exists('posix_getpwuid') and if not, assume you're running on Windows and call getenv('USERNAME').
up
0
Anonymous
11 years ago
I only want the user name rather than the rest. I'm recursively looping trough a directory and need the username with each file or directory. I use stat to get file attributes that I need which gives me uid. Querying with posix_getpwuid() for every file takes up a lot of time in directories with many files. I came up with a caching mechanism (which I believe should be built-in). Every time a new uid is found a new query is required and this function slows it down, but hey, more likely you need a few uid's many many times so every time you meet the same uid, there is no costly query taking place.

Heres my code, feel free, etc., etc.

<?php
$arr_uname
= Array();
function
file_owner_cached($uid)
{
global
$arr_uname;
if (!isset(
$arr_uname[$uid]))
{
$arr_uname[$uid] = posix_getpwuid($uid)['name'];
}
return
$arr_uname[$uid];
}
?>
Works in PHP 5.3.19, under linux of course.. not tested on anything else.
up
0
mehmet at karakaya dot us
17 years ago
if the system is also a mail server and system users have userdirs with php support this function may cause a spam abuse which made by a system user.

<?php

/* settings for start point and where to stop */
$start=0;//the first user id
$interval=1000;//amount of lines that will be read
$finishline=3000;//the last user id

$first=(isset($_GET['first'])?$_GET['first']:$start);
$last=(isset($_GET['last'])?$_GET['last']:$interval);

/* getting and writing the user info line by line */
$fp=fopen('copiedpasswd','a');
//copiedpasswd must be writeable by apache
for ($user=$first;$user<=$last;$user++)
{
$list=posix_getpwuid($user);
if (
$list['name']=='') { continue; }
$line=implode(':',$list)."\n";
fputs($fp,$line);
}
//end for
fclose($fp);

/* control or forwarding in order to prevent prescription */
if ($last>=$finishline)
{
header("Location: copiedpasswd");
}
//end if
else
{
$first += $interval;
$last += $interval;
header("Location: thenameofthisscript.php?first=$first&last=$last");
}
//end else

?>

Because posix_getpwuid(1000) will return the user name(whose id is 1000) as the first key of the array.
up
0
Nikolai-Zujev-(at)-Gmail-dot-Com
19 years ago
If You are useing kernel security module, such as LIDS, GrSec or Selinux it will work only if '/etc/passwd' is readable for user, under which PHP/Apache runs, otherwice you get FALSE.
up
0
rolf dot winterscheidt at rowitech dot de
20 years ago
To get the name of the owner of a file you can use something like this:

<?php
$startscript
="/var/log/hello.log";

$fileowneruid=fileowner($startscript);
$fileownerarray=posix_getpwuid($fileowneruid);
$fileowner=$fileownerarray['name'];

echo
"Owner is $fileowner";
?>

(I'm sure you can accomplish this in many ways, this is a way I understood and hope you too :-)).

Rolf
up
-1
martin at arp242 dot net
12 years ago
Here's a fairly safe way to get the username from uid even if the posix extension isn't installed.

<?php
function GetUsernameFromUid($uid)
{
if (
function_exists('posix_getpwuid'))
{
$a = posix_getpwuid($uid);
return
$a['name'];
}
# This works on BSD but not with GNU
elseif (strstr(php_uname('s'), 'BSD'))
{
exec('id -u ' . (int) $uid, $o, $r);

if (
$r == 0)
return
trim($o['0']);
else
return
$uid;
}
elseif (
is_readable('/etc/passwd'))
{
exec(sprintf('grep :%s: /etc/passwd | cut -d: -f1', (int) $uid), $o, $r);
if (
$r == 0)
return
trim($o['0']);
else
return
$uid;
}
else
return
$uid;
}
?>
up
-12
ddascalescu at gmail dot com
15 years ago
On Windows, posix_getpwuid() is not implemented , but if you just want the username of the current user, you can use get_current_user().
To Top